Abstract:This study aims towards a systematic reciprocity of the tunable synthesis parameters - partial pressure of N2 gas, ion energy (Ei) and Ti interface in TiN thin film samples deposited using ion beam sputtering at ambient temperature (300 K). At the optimum partial pressure of N2 gas, samples were prepared with or without Ti interface at Ei = 1.0 or 0.5 keV. They were characterized using x-ray reflectivity (XRR) to deduce thickness, roughness and density. The roughness of TiN thin films was found to be below 1 nm, when deposited at the lower Ei of 0.5 keV and when interfaced with a layer of Ti. Under these conditions, the density of TiN sample reaches to 5.80(<math>±</math>0.03) g cm−3, a value highest hitherto for any TiN sample. X-ray diffraction and electrical resistivity measurements were performed. It was found that the cumulative effect of the reduction in Ei from 1.0 to 0.5 keV and the addition of Ti interface favors (111) oriented growth leading to dense and smooth TiN films and a substantial reduction in the electrical resistivity. The reduction in Ei has been attributed to the surface kinetics mechanism (simulated using SRIM) where the available energy of the sputtered species (<math><</math>Esp>) leaving the target at Ei = 0.5 keV is the optimum value favoring the growth of defects free homogeneously distributed films. Secondary ion mass spectroscopy depth profile measurements confirm the uniform distribution of N and Ti across the depth of a sample. The electronic structure of samples was probed using N K-edge and Ti L-edge absorption spectroscopy and the information about the crystal field and spin-orbit splitting confirmed TiN phase formation. In essence, through this work, we demonstrate the role of <math><</math>Esp> and Ti interface in achieving highly dense and smooth TiN thin films with low resistivity without the need of a high temperature or substrate biasing during the thin film deposition process.

An Analytic Equation for Assessing the Thickness of Titanium Nitride Coatings by Energy Dispersive X-ray Spectroscopy in the Scanning Electron Microscope

Study of optical and electrical properties of TiN thin films prepared by cathodic ion sputtering

In Situ Scanning Tunneling Microscopy Studies of the Evolution of Surface Morphology and Microstructure in Epitaxial TiN(001) Grown by Ultra-High-vacuum Reactive Magnetron Sputtering

Study of Titanium Nitride for Low-E Coating Application

Sims Depth Profiling of Thin Nitride- and Carbide-Based Films for Hard Coating

Electrical and optical properties of titanium nitride coatings prepared by atmospheric pressure chemical vapor deposition

Measuring the Absorption Coefficients of TiN Thin Films with Different Thickness

X-ray reflectivity and diffraction investigation on TiN SiNx nanolayered coatings deposited by magnetron sputtering

Mechanical properties of TiN thin film coatings on 304 stainless steel substrates

Evolution of Chemical, Structural, and Mechanical Properties of Titanium Nitride Films with Different Thicknesses Fabricated Using Pulsed DC Magnetron Sputtering

Reference-free evaluation of thin films mass thickness and composition through energy dispersive X-ray spectroscopy

Novel Method of Measuring the Thickness of Nanoscale Films Using Energy Dispersive X‐Ray Spectroscopy Line Scan Profiles

Non-destructive thickness measurement of thermal barrier coatings using terahertz radiation

Synthesis and study of highly dense and smooth TiN thin films

Morphological, Mechanical Property Analysis and Comparative Study over Structural Properties of CVD TiN Film Grown under Different Substrate Temperature in Nitrogen Gas Atmosphere

Composition and Texture of TiN Thin Films Fabricated by ECR Enhanced Sputtering Deposition

Thickness Dependent Optical Properties of Titanium Oxide Thin Films

Preparation and Wear Assessment of Ultrasonic Electrodeposited Ni–TiN Thin Films

Indentation stress–strain analysis and finite element simulation to determine elastoplastic properties of thin films decreasing the substrate contribution

A Study on Biocompatibility of TiN Thin Films Deposited by Dual-Energy Ion Beam Assisted Deposition

Influence of Deposition Conditions on Texture Development and Mechanical Properties of TiN Coatings