Abstract:Ti-Au intermetallic-based material systems are being extensively studied as next-generation thin film coatings to extend the lifetime of implant devices. These coatings are being developed for application to the articulating surfaces of total joint implants and, therefore, must have excellent biocompatibility combined with superior mechanical hardness and wear resistance. However, these key characteristics of Ti-Au coatings are heavily dependent upon factors such as the surface properties and temperature of the underlying substrate during thin film deposition. In this work, Ti3Au thin films were deposited by magnetron sputtering on both glass and Ti6Al4V substrates at an ambient and elevated substrate temperature of 275 °C. These films were studied for their mechanical properties by the nanoindentation technique in both variable load and fixed load mode using a Berkovich tip. XRD patterns and cross-sectional SEM images detail the microstructure, while AFM images present the surface morphologies of these Ti3Au thin films. The biocompatibility potential of the films is assessed by cytotoxicity tests in L929 mouse fibroblast cells using Alamar blue assay, while leached ion concentrations in the film extracts are quantified using ICPOEMS. The standard deviation for hardness of films deposited on glass substrates is ∼4 times lower than that on Ti6Al4V substrates and is correlated with a corresponding increase in surface roughness from 2 nm for glass to 40 nm for Ti6Al4V substrates. Elevating substrate temperature leads to an increase in film hardness from 5.1 to 8.9 GPa and is related to the development of a superhard β phase of the Ti3Au intermetallic. The standard deviation of this peak mechanical hardness value is reduced by ∼3 times when measured in fixed load mode compared to the variable load mode due to the effect of nanoindentation tip penetration depth. All tested Ti-Au thin films also exhibit excellent biocompatibility against L929 fibroblast cells, as viability levels are above 95% and leached Ti, Al, V, and Au ion concentrations are below 0.1 ppm. Overall, this work demonstrates a novel Ti3Au thin film system with a unique combination of high hardness and excellent biocompatibility with potential to be developed into a new wear-resistant coating to extend the lifetime of articulating total joint implants.

Thin films of Titanium Nitride deposite on substrates used for biomedical applications

Experimental investigation of tribo-mechanical and chemical properties of TiN PVD coating on titanium substrate for biomedical implants manufacturing

Study of optical and electrical properties of TiN thin films prepared by cathodic ion sputtering

Mechanical, biocorrosion, and antibacterial properties of nanocrystalline TiN coating for orthopedic applications

Deposition of TiN and TiAlN Thin Films on Stainless Steel Tubes by a Cylindrical Magnetron Sputtering Method

Plasma Surface Treatment of CoCr and NiCr Alloys for Dental Applications: A Comparative Study of TiN Thin‐Film Plasma Deposition Techniques

Morphological, mechanical and antibacterial properties of Ti-Cu-N thin films deposited by sputtering DC

Wear Properties of Magnetron Sputtering TiN Coating on α+β Type Biomedical Ti6A17Nb Alloy

Multilayered TiAlN films on Ti6Al4V alloy for biomedical applications by closed field unbalanced magnetron sputter ion plating process

RF magnetron sputtering mediated NiTi/Ag coating on Ti-alloy substrate with enhanced biocompatibility and durability

Wear performance of Ti-based alloy coatings on 316L SS fabricated with the sputtering method: Relevance to biomedical implants

Comparative Study on Mechanical Properties of Biomedical Carbon Nitride Film

Synthesis of Titanium Nitride Thin Films Deposited by a New Shielded Arc Ion Plating

A Novel Biomedical TiN-embedded TiO2 Nanotubes Composite Coating with Remarkable Mechanical Properties, Corrosion, Tribocorrosion Resistance, and Antibacterial Activity

Plasma Deposition of Ti-Nb-N Films on AISI 304 Stainless Steel by Cathodic Cage Technique

Study on the Tribological Properties of Hard Films Deposited on Biomedical NiTi Alloy

Adhesion and growth of titanium nitride coating deposited on AISI 316L using cylindrical magnetron sputtering

Nanomechanical and Microstructural Characterization of Biocompatible Ti 3 Au Thin Films Grown on Glass and Ti6Al4V Substrates

Substrate Effects on the Micro/Nanomechanical Properties of TiN Coatings

Chemical modification of nanotubular Ti surfaces with calcium phosphate and strontium ranelate for biomedical applications

Biosynthesis of calcium hydroxylapatite coating on sputtered Ti/TiN nano multilayers and their corrosion behavior in simulated body solution