Abstract:The direct synthesis of light olefins from syngas via Fischer-Tropsch synthesis reaction is a promising technology for direct synthesis of olefins from syngas. The key is to improve the selectivity of light olefins through the regulation of product distribution. In this work, the hydrophobic Fe@Si catalyst was prepared by room temperature solid state methodStober-silylation method, and then the catalyst was combined with SAPO-34 molecular sieves with different contents to prepare Fe@Si/S-34 composite catalysts. The effects of SAPO-34 molecular sieve content on the physicochemical properties of the catalysts were investigated by X-ray diffraction, scanning electron microscopy, N-2 adsorption-desorption, NH3 temperature programmed desorption and water contact angle measurement. The results showed that the content of SAPO-34 molecular sieve has significant influence on the surface area, pore volume, acidity and hydrophobicity of the catalysts. With the increase of SAPO-34 molecular sieve content, the specific surface area and total pore volume of the catalyst increased, the weak acid and medium-strong acid sites increased, and the hydrophobicity weakened. The catalytic performance evaluation results showed that the Fe@Si/S-34 composite catalyst decomposed C5+ hydrocarbons into light hydrocarbons, significantly reduced the selectivity of C5+ products and increased the selectivity of C2 similar to C4 hydrocarbons. Appropriate SAPO-34 molecular sieve could significantly improve the selectivity of C2 similar to C-4 olefins. When the mass ratio of Fe@Si catalyst to SAPO-34 is 2, the C-2 similar to C-4 olefin selectivity of Fe@Si/S-34 catalyst is the highest, the conversion of CO is 80.0%, the selectivity of CO2 in the product is 8.9%, and the selectivity of C-2 similar to C-4 olefins is 31.1%. In this study, the hydrophobicity of Fe@Si catalyst and the cracking activity of SAPO-34 molecular sieve for C5+ hydrocarbon were coupled together to inhibit the water-gas shift (WGS) reaction, reduce the CO2 selectivity and obtain higher C-2 similar to C-4 olefin selectivity, which provided a new strategy for the development of catalysts for Fischer-Tropsch synthesis to olefins.

Effect of H 2 S co-feeding on the performance of Fe/SiO 2 catalyst for isomerization and dehydrogenation of C 5 -monoolefin

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Bifunctional Catalysts Composed of Low Silicon‐content SAPO‐34 Nanosheets and in 2 O 3 /zro 2 with Improved Performance for CO 2 Hydrogenation

Synthesis of SiO2-stabilized FeMn catalysts for catalytic production of liquid fuels: effect of SiO2 position over bimetallic catalysts

High yield production of C2–C3 olefins and para-xylene from methanol using a SiO2-coated FeOx/ZSM-5 catalyst

Preparation of supported Fe 2 O 3 ‐Cl/ β ‐zeolite catalyst and its application in the selective oligomerization reaction of isobutene in mixed C4

Effect of Isobutane Co-Feed over Pt/H-MCM-22 on Selectivity of the Dimethyl Ether to Hydrocarbon Conversion

Selective production of light α-olefins and long-chain α-olefins from CO2/H2 and CO/H2 over iron-based catalysts: Effects of Na2S and H2O

Synergetic Effect of Sodium and Sulfur on Iron Catalysts for CO Hydrogenation Directly to Lower Olefins

Effect of Si/Al2 Ratio on Catalytic Performance of HZSM-5 Zeolites for Conversion of Ethanol to Propylene

Hydrogenation of Styrene-Isoprene-styrene Block Copolymer and Its Product Properties

A hydrophobic FeMn@Si catalyst increases olefins from syngas by suppressing C1 by-products

Role of Zr loading into In2O3 catalysts for the direct conversion of CO2/CO mixtures into light olefins

Effect of Co/SiO2 catalyst modified by zeolites on Fischer-Tropsch synthesis of gasoline-cut hydrocarbons

Effect of Fe substitution over ZSM-48 on performance of n -dodecane hydroisomerization and distribution of isomers

Role of SiO2 in Different Iron-Based Catalysts for Fischer-Tropsch Synthesis to Light Olefins

CO Hydrogenation over Fe-promoted Rh–Mn–Li/SiO2 Catalyst: the Effect of Sequences for Introducing the Fe Promoter

The effect of surface carbon on ethylene dimerization

Highly efficient and selective synthesis of renewable isoprene over Mo‐Fe‐O and MgO/Mg(OH)2 composite catalysts

Introduction of NiSO 4 to Ni/SiO 2 catalyst in hydrogenation of furfuryl alcohol: Tailoring metallic nickel sites to switch major product from tetrahydrofurfuryl alcohol to cyclopentanone

A novel tandem route to renewable isoprene over Mo-Fe oxide and mesoporous Cu/MgO composite catalysts