Abstract:Flow-through gold film perforated with periodically arrayed sub-wavelength nano-holes can cause extraordinary optical transmission (EOT), which has recently emerged as a label-free surface plasmon resonance sensor in biochemical detection by measuring the transmission spectral shift. This paper describes a systematic study of the effect of microfluidic field on the spectrum of EOT associated with the porous gold film. To detect biochemical molecules, the sub-micron-thick film is free-standing in a microfluidic field and thus subject to hydrodynamic deformation. The film deformation alone may cause spectral shift as measurement error, which is coupled with the spectral shift as real signal associated with the molecules. However, this microfluid-induced measurement error has long been overlooked in the field and needs to be identified in order to improve the measurement accuracy. Therefore, we have conducted simulation and analytic analysis to investigate how the microfluidic flow rate affects the EOT spectrum and verified the effect through experiment with a sandwiched device combining Au/Cr/Si3N4 nano-hole film and polydimethylsiloxane microchannels. We found significant spectral blue shift associated with even small flow rates, for example, 12.60 nm for 4.2 μl/min. This measurement error corresponds to 90 times the optical resolution of the current state-of-the-art commercially available spectrometer or 8400 times the limit of detection. This really severe measurement error suggests that we should pay attention to the microfluidic parameter setting for EOT-based flow-through nano-hole sensors and adopt right scheme to improve the measurement accuracy.

Temperature-based energy changes in gold nanowire sensors for flow rate detection and failure prediction

Nanowire sensor calibration and performance evaluation in microfluidic flow velocity monitoring

Nanowire Thermometers.

Overcoming the screening-induced performance limits of nanowire biosensors: A simulation study on the effect of electro-diffusion flow

Highly Sensitive Hot-Wire Anemometry Based On Macro-Sized Double-Walled Carbon Nanotube Strands

A Novel Vanadium Dioxide-Based Dual-Heater Microfluidic Thermal Flow Sensor with Record High Sensitivity

Design and Modeling of Vanadium Dioxide-Based High-Sensitivity Microfluidic Calorimetric Sensors

Design of Thermal Liquid Flow Microsensor

High Sensitivity Carbon Nanotubes Flow-Rate Sensors And Their Performance Improvement By Coating

Investigation on the electrical property of gold nanowire prepared by nanoskiving

Study of Flow Rate Induced Measurement Error in Flow-Through Nano-Hole Plasmonic Sensor.

Geometry and Temperature Effects on the Threshold Voltage Characteristics of Silicon Nanowire MOS Transistors

Vanadium Dioxide-Based High Sensitivity Dual-Heater Calorimetric Microfluidic Sensor

Single Semiconducting Zinc Oxide Nanowire Based Device for Thermal and Airflow Sensing

Novel fiber-tip micro flowmeter based on optofluidic microcavity filled with silver nanoparticles solutions

Thermal and Flow Characterization in Nanochannels with Tunable Surface Wettability: A Comprehensive Molecular Dynamics Study

In operando nanothermometry by nanodiamond based temperature sensing

High Strain Rate Tensile Testing of Silver Nanowires: Rate-Dependent Brittle-to-Ductile Transition

A Temperature Microsensor for Measuring Laser-Induced Heating in Gold Nanorods

High Sensitivity Temperature Sensor Based on A Long, Suspended Single-Walled Carbon Nanotube Array

Nano-NMR based flow meter