Abstract:Molybdenum disulfide (MoS2) is a promising anode material for lithium-ion batteries (LIBs) due to its distinctive graphene-like structure and high specific capacity. However, its commercial application is hindered by the severe volume expansion during lithiation/delithiation and poor conductivity. In this paper, we report a facile one-pot enhanced hydrothermal synthesis strategy to prepare high-performance MoS2/C composite materials. The results indicate that the as-prepared MoS2/C composite is a subspheroidal core–shell structure material, with uniform coating, good particle dispersion, and an average grain size of approximately 80 nm. The morphology of the composite remained unchanged even after annealing at 500 °C for 2 h. The addition of glucose can accelerate the nucleation and growth of MoS2, and higher hydrothermal temperatures can improve the product yield. The addition of PVP has little effect on the yield, but significantly reduces the particle size. The XPS analysis reveals that the MoO3 may be generated as an intermediate product during the hydrothermal process. The electrochemical test results show that the unannealed MoS2/C samples exhibit discharge-specific capacities of 705.2 mAh·g−1 and 625.7 mAh·g−1 after the first cycle and the 100th cycle, respectively, at a current density of 500 mA·g−1, with a capacity retention rate of 88.7%. In contrast, the specific capacity of the MoS2/C specimens after annealing at 500 °C for 2 h shows a tendency to decrease and then slowly increase during the cycles, and the discharge specific capacity is 582.3 mAh·g−1 after the 100th cycle, which is lower than that of the unheated sample. The impedance analysis reveals that the lithium-ion diffusion coefficient of the MoS2/C material without calcination is 2.11 × 10−18 cm·s−2, which is superior to that of the annealed MoS2/C and pristine MoS2 samples. This characteristic is favorable for lithiation/delithiation during the charge/discharge process.

A large area mesh-like MoS2 with an expanded interlayer distance synthesized by one-pot method and lithium storage performance

Sulfur-atom-expanded MoS2 nanosheets with enhanced lithium-ion storage

Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

Layer-By-Layer Polyelectrolyte Assisted Growth of 2d Ultrathin Mos2 Nanosheets on Various 1d Carbons for Superior Li-Storage

Uniform Small-Sized MoS2 from Novel Solution-Based Microwave-Assisted Method with Exceptional Reversible Lithium Storage Properties

Bowl-like mesoporous polymer-induced interface growth of molybdenum disulfide for stable lithium storage

Dual Regulation Mechanism of MoS2/MoO3 Heterostructure for Polysulfide and Volume Effect Enables Stable and Durable Lithium Storage

Novel C/MoS2 hollow nanocomposites enhance lithium storage in battery anodes

Facile synthesis of MoS 2 confined in yolk-shell hollow mesoporous carbon spheres with enhanced polysulfide binding for high-rate Li-S batteries

Microscale and molecular regulation for molybdenum disulfide with extended layer spacing for high-performance sodium ion battery anodes

Facile Synthesis of A Mos2 and Functionalized Graphene Heterostructure for Enhanced Lithium-Storage Performance

Facile Synthesis of Heterostructured MoS 2 –MoO 3 Nanosheets with Active Electrocatalytic Sites for High-Performance Lithium–Sulfur Batteries

Hydrochloric Acid-Assisted Synthesis of Highly Dispersed MoS<sub>2</sub> Nanoflowers as the Cathode Material for Mg-Li Batteries

Synthesis of hierarchical MoS2 microspheres composed of nanosheets assembled via facile hydrothermal method as anode material for lithium-ion batteries

Confined MoS2 growth in a unique composite matrix for ultra-stable and high-rate lithium/sodium-ion anodes

One-Pot Hydrothermal Synthesis and Electrochemical Performance of Subspheroidal Core–Shell Structure MoS2/C Composite as Anode Material for Lithium-Ion Batteries

The Synthesis of Yolk-Shell Structure Assembled by MoS2@N, S-doped Carbon for Enhanced Electrochemical Performance

Uniform Yolk-Shell MoS 2 @Carbon Microsphere Anodes for High-Performance Lithium-Ion Batteries.

Ultrathin MoS2 anchored on 3D carbon skeleton containing SnS quantum dots as a high-performance anode for advanced lithium ion batteries

Amorphous MoS3 decoration on 2D functionalized MXene as a bifunctional electrode for stable and robust lithium storage

Unique three-dimensional hierarchical heterogeneous MoS2/graphene structures as a high-performance anode material for lithium-ion batteries