Abstract:Molybdenum disulfide (MoS2) is a promising anode material for lithium-ion batteries (LIBs) due to its distinctive graphene-like structure and high specific capacity. However, its commercial application is hindered by the severe volume expansion during lithiation/delithiation and poor conductivity. In this paper, we report a facile one-pot enhanced hydrothermal synthesis strategy to prepare high-performance MoS2/C composite materials. The results indicate that the as-prepared MoS2/C composite is a subspheroidal core–shell structure material, with uniform coating, good particle dispersion, and an average grain size of approximately 80 nm. The morphology of the composite remained unchanged even after annealing at 500 °C for 2 h. The addition of glucose can accelerate the nucleation and growth of MoS2, and higher hydrothermal temperatures can improve the product yield. The addition of PVP has little effect on the yield, but significantly reduces the particle size. The XPS analysis reveals that the MoO3 may be generated as an intermediate product during the hydrothermal process. The electrochemical test results show that the unannealed MoS2/C samples exhibit discharge-specific capacities of 705.2 mAh·g−1 and 625.7 mAh·g−1 after the first cycle and the 100th cycle, respectively, at a current density of 500 mA·g−1, with a capacity retention rate of 88.7%. In contrast, the specific capacity of the MoS2/C specimens after annealing at 500 °C for 2 h shows a tendency to decrease and then slowly increase during the cycles, and the discharge specific capacity is 582.3 mAh·g−1 after the 100th cycle, which is lower than that of the unheated sample. The impedance analysis reveals that the lithium-ion diffusion coefficient of the MoS2/C material without calcination is 2.11 × 10−18 cm·s−2, which is superior to that of the annealed MoS2/C and pristine MoS2 samples. This characteristic is favorable for lithiation/delithiation during the charge/discharge process.

Hydrochloric Acid-Assisted Synthesis of Highly Dispersed MoS<sub>2</sub> Nanoflowers as the Cathode Material for Mg-Li Batteries

Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

From Dispersed Microspheres to Interconnected Nanospheres: Carbon-Sandwiched Mono Layered Mos2 As High-Performance Anode of Li-Ion Batteries

Facile synthesis of MoS 2 confined in yolk-shell hollow mesoporous carbon spheres with enhanced polysulfide binding for high-rate Li-S batteries

Rational Design of MXene/1T‐2H MoS2‐C Nanohybrids for High‐Performance Lithium–Sulfur Batteries

Synergistic Polysulfides Adsorption–Conversion with Mo2C–MoO2 Heterostructure for Kinetically Enhanced Lithium–Sulfur Battery

Monodisperse Molybdenum Nanoparticles as Highly Efficient Electrocatalysts for Li-S Batteries

Facile Synthesis of Heterostructured MoS 2 –MoO 3 Nanosheets with Active Electrocatalytic Sites for High-Performance Lithium–Sulfur Batteries

Rational design of hollow flower-like MoS2/Mo2C heterostructures in N-doped carbon substrate for synergistically accelerating adsorption-electrocatalysis of polysulfides in lithium sulfur batteries

One-Pot Hydrothermal Synthesis and Electrochemical Performance of Subspheroidal Core–Shell Structure MoS2/C Composite as Anode Material for Lithium-Ion Batteries

One-Step Hydrothermal Reaction Induced Nitrogen-Doped MoS2/MXene Composites with Superior Lithium-Ion Storage

Highly Catalytic Porous MoN Nanosheets Anchored Carbon Microtubes Interlayer for Lithium-Sulfur Batteries

Facile synthesis of nanoflower-like MoS2/C as anode for lithium-ion batteries

Uniform Yolk-Shell MoS 2 @Carbon Microsphere Anodes for High-Performance Lithium-Ion Batteries.

Sulfur-atom-expanded MoS2 nanosheets with enhanced lithium-ion storage

MoS 2 Nanosphere-Decorated Reduced Graphene Oxide to Promote Catalytic Activity for High-Performance Lithium–Sulfur Batteries

Self-supported MoO2/MoS2 Nano-Sheets Embedded in a Carbon Cloth As a Binder-Free Substrate for High-Energy Lithium–sulfur Batteries

Enhanced Electrochemical Kinetics with Highly Dispersed Conductive and Electrocatalytic Mediators for Lithium–Sulfur Batteries

Catalytic Mo2C decorated N-doped honeycomb-like carbon network for high stable lithium-sulfur batteries

Ultra‐Dispersed α‐MoC 1−x Embedded in a Plum‐Like N‐Doped Carbon Framework as a Synergistic Adsorption–Electrocatalysis Interlayer for High‐Performance Li–S Batteries

Synthesis of hierarchical MoS2 microspheres composed of nanosheets assembled via facile hydrothermal method as anode material for lithium-ion batteries