Abstract:Nickel-based superalloys exhibit pronounced elastic anisotropy and, hence, the local grain orientation strongly affects the stress and strain distribution in the material under mechanical loadings. Therefore, the crack initiation and failure behaviour of components made from nickel-based superalloys are complex and hardly predictable. A better fundamental understanding of the phenomena that occur in nickel-based superalloys under a quasistatic and cyclic load is therefore desired. Previously, a continuum mechanics-based model has been successfully developed, considering the grain structure, the elastic anisotropy, and the Schmid factor, based on data from electron backscatter diffraction (EBSD). The E·m model was confirmed by the finite element method (FEM) simulations and experimental observations regarding the resulting average stresses and strains in the individual grains as well as the formation of slip bands under a quasistatic load with few restrictions. The behaviour under cyclic loadings has been investigated in this work to correlate the mechanical behaviour, simulated by the previously developed FE models, with the local stiffness and Schmid factors considering fatigue failure. For this purpose, the fatigue behaviour of Inconel 617 samples was characterised up to the high-cycle fatigue (HCF) regime, accompanied by EBSD measurements for stress amplitudes that resulted in strains close to the elastic–plastic regime. The EBSD data were used to create digital twins of the samples to simulate the mechanical reaction to a displacement similar to the associated strain of the fatigue tests. An analysis of the fractured samples by scanning electron microscopy was performed to retrace the location of the crack initiation supported by the EBSD measurements before and after fatigue testing. Two samples were investigated in detail that showed different fracture types. Sample 1 showed transcrystalline failure in a grain that showed a high Young's modulus, Schmid factor, and resolved shear stress that indicates a failure due to the properties of the grain itself. In contrast, an intercrystalline failure was observed for sample 2 that showed large differences in the orientation and, hence, largely different mechanical properties in the area of failure as well. The observed failure types, the resulting stresses and strains calculated by the FE model, and the consideration of the E·m model showed an agreement of all the methods. Therefore, the findings of this work complement previous investigations of the mechanical behaviour of coarse-grained anisotropic nickel-based superalloys with a focus on the orientations of the grains towards the loading direction.

Combined volumetric, energetic and microstructural defect analysis of ECAP-processed nickel

1216 Nano-Scale Strength Analysis by EBSD and AFM Hybrid Method in Ultrafine-Grained Copper Processed by ECAP

X-ray diffraction (XRD) profile analysis of pure ECAP-annealing Nickel samples

Microscopic Analysis by EBSD Method on Fatigue Crack Propagation Behaviour in Ultrafine-Grained Copper

Free volumes in bulk nanocrystalline metals studied by the complementary techniques of positron annihilation and dilatometry

Thermal and Stress Impacts on Vacancy Diffusion Through Atomistic Simulations

Characterization of microstructural evolution and mechanical properties of Cu-Ni-Cr alloys deformed by ECAP

3D FEM Simulation of Multipass ECAP Ti-50.8%Ni at Various Temperatures

Investigation of Deformation Microstructures in Spark Plasma Sintered Nickel

Stored Energy in Nickel Cold Rolled to Large Strains, Measured by Calorimetry and Evaluated from the Microstructure

Fatigue Analysis of the Nickel-Based Superalloy Inconel 617 by Fatigue Experiments and EBSD Data-Based Finite Element Simulations in Correlation with E·m Theories

HighP-TNano-Mechanics of Polycrystalline Nickel.

3D in-situ characterization of dislocation density in nickel-titanium shape memory alloys using high-energy diffraction microscopy

Bending deformation and indentation hardness of electrochemically deposited nanocrystalline nickel-iron alloys

Microstructure Optimization of Mg-Alloys by the ECAP Process Including Numerical Simulation, SPD Treatments, Characterization, and Hydrogen Sorption Properties

Correlative statistical microstructural assessment of precipitates and their distribution, with simultaneous electron backscatter diffraction and energy dispersive X-ray spectroscopy

Investigating the Influence of Thermomechanical Equal Channel Angular Pressing (ECAP) Improved Die on AA-6061

In situ Transmission Electron Microscopy Investigation of Electroplasticity in Single Crystal Nickel

Experimental and Numerical Investigation of the ECAP Processed Copper: Microstructural Evolution, Crystallographic Texture and Hardness Homogeneity

In Situ Scanning–digital Image Correlation for High-Temperature Deformation Measurement of Nickel-Based Single Crystal Superalloy

EBSD-Based Techniques for Characterization of Microstructural Restoration Processes During Annealing of Metals Deformed to Large Plastic Strains