Abstract:This article is devoted to the synergistic design of the thermal management and signal integrity for 3-D integrated chips. The structure parameters of the micro-fin and interconnected components are optimized to obtain a balanced performance of chip heat dissipation and signal integrity. The 3-D integrated chip flows heat transfer model under the action of electrothermal coupling is developed. A full-wave electromagnetic simulation model of the signal interconnection components is proposed with the same structural parameters. The effects of various structural factors on the heat transfer performance and signal integrity of 3-D integrated chips are investigated. A multiobjective optimization algorithm is carried out to simultaneously reduce the total thermal resistance of the 3-D integrated chip and the signal transmission losses of the critical interconnect components. The results show that the total thermal resistance of the 3-D IC becomes lower with a larger through-silicon via (TSV) diameter, micro-fins height and micro-fin radius, and smaller oxide thickness. When the TSV diameter and oxide thickness increase, the height and radius of the micro-fins are reduced to facilitate the signal transmission of the chip’s interconnected components. The response surface analysis method was used to design the experimental combination and thus obtain the fit function for the performance of the two objectives. Hundred sets of Pareto optimal solutions are obtained by multiobjective optimization. The technique for order preference by similarity to ideal solution (TOPSIS) method is used to select the weights of the two optimization objectives to determine the optimal solution. When thermal resistance and signal transmission are given equal weight in the chip design, thermal resistance is reduced by 13.8%, and signal transmission efficiency is improved by 9.74%. The study has important implications for chip thermal management and signal integrity.

An efficient Green's function-based Bayesian optimization method for the thermal optimization of multi-chips on a silicon interposer

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Thermal design optimization of electronic circuit board layout with transient heating chips by using Bayesian optimization and thermal network model

Thermal Layout Optimization for 3D Stacked Multichip Modules.

Optimizing the heat source layout of chips using bionic method: Reduction of junction temperature

Multi-Objective Optimization for Heat Transfer Performance of Micro-Fins and Signal Integrity of Key Interconnect Technologies in 3d Integrated Chips

Machine Learning for 3D-IC Electric-Thermal Simulation and Management

Fast optimization of multichip modules using deep learning coupled with Bayesian method

Machine learning thermal circuit network model for thermal design optimization of electronic circuit board layout with transient heating chips

Layout-Dominated Electro-Thermal Optimization for Multichip Power Modules with Response Surface and Fourier Series Model

A Novel Thermal Optimization Flow Using Incremental Floorplanning for 3D ICs

Efficient Transient Thermal Analysis of Chiplet Heterogeneous Integration

Chip Layout Optimization of SiC Power Modules Based on Multiobjective Electro-Thermal Design Strategy

Heat Spreading Effect on the Optimal Geometries of Cooling Structures in A Manifold Heat Sink

Dynamic Thermal Management for 3-D ICs with Time-Dependent Power Map Using Microchannel Cooling and Machine Learning

A system level optimization of on-chip thermoelectric cooling via Taguchi-Grey method

Thermal for 3D stacked modules ?

Simultaneous Optimization Of Performance And Thermal Effects Based On Two-Stage Microarchitectural Floorplanning

Collaborative optimization of thermal conductivity distribution and heat source layout based on Bayesian optimization

Thermal-Aware Incremental Floorplanning for 3D ICs Based on MILP Formulation.

Three-dimensional Multiprocessor System-on-chip Thermal Optimization