Abstract:The manifold microchannel heat sink shows great potential for cooling high-heat-flux electronic equipment owing to its exceptional thermal and flow performance. A new manifold ring-shaped channel design is introduced to improve the temperature uniformity for circular heat sources. A comparative analysis of the manifold straight channel, radial expansion channel and manifold ring-shaped channel designs is conducted based on the same heating area under equal mass flow conditions by numerical investigation using single-phase de-ionized water. The findings indicate that the newly proposed manifold ring-shaped channel design exhibits a lower maximum temperature, a lower average temperature, a better temperature uniformity and a smaller pressure drop in comparison to the straight channel and radial channel designs. Specifically, at a mass flow rate of 2.5 g/s, the ring-shaped channel design demonstrates a 71.4 % and 45.4 % reduction in the temperature difference between the maximum temperature and the minimum temperature of the heating surface, and the coefficient of performance is enhanced by 458.2 % and 169.7 % when compared to the straight channel and radial channel designs, respectively. Additionally, three improved designs based on the original manifold ring-shaped channel design are proposed to further enhance fluid flow distribution in the ring-shaped channel design. The results reveal that all three manifold ring-shaped channel optimizations further lower the maximum temperature, the average temperature and the temperature difference. Notably, the improved case3 exhibits the best thermal and hydraulic performances among all structures. When compared to straight channel and radial channel designs, the improved case3 demonstrates an 86.9 % and 75.0 % reduction in the temperature difference, and an increase of 201.2 % and 523.4 % in coefficient of performance under the equal mass flow comparison basis. A heat flux of 1200 W/cm2 can be dissipated at 6 g/s when the maximum temperature rise is kept below 60 K, with a pressure drop of 38 kPa.

Performance Improvement of Z-Type Manifold Microchannel Heat Sink with Novel Fin-Arrangements

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Numerical Study on Performances of Mini-Channel Heat Sinks with Non-Uniform Inlets

Thermal and hydrodynamic characteristics of single-phase flow in manifold microchannels with countercurrent regions

Improvement of flow and heat transfer performance of manifold microchannel with porous fins

Numerical investigation of novel manifold microchannel heat sinks with countercurrent regions

Study on the flow and heat transfer characteristics of pin-fin manifold microchannel heat sink

Numerical and Experimental Study on Manifold-Distributed Jet Microchannel with Micro-Pin-fins

Heat Transfer Enhancement and Temperature Uniformity Improvement of Microchannel Heat Sinks with Twisted Blade-Like Fins

Micro Pin Fins with Topologically Optimized Configurations Enhance Flow Boiling Heat Transfer in Manifold Microchannel Heat Sinks

Experimental and Numerical Study on Thermofluidic Characteristics of Microchannel Heat Sinks with Various Micro Pin–fin Arrays Arrangement Patterns

Effects of Manifold Designs on Flow and Thermal Performances of Microchannel Heat Sink

Numerical Investigation of Fluid Flow and Heat Transfer in High-Temperature Wavy Microchannels with Different Shaped Fins Cooled by Liquid Metal

Numerical Study on a New Manifold Ring-Shaped Microchannel Structure for Circular Heat Source with Excellent Temperature Uniformity

Heat Transfer Enhancement of Microchannel Heat Sink Using Sine Curve Fins

Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance

Experimental and Numerical Investigation of Thermal Performance of S-shaped Manifold Microchannel Heat Sinks

Heat Transfer and Flow Analyses of Microchannel Heat Sink with Twisted Blade-Like Fins

Single-phase and Two-phase Flow and Heat Transfer in Microchannel Heat Sink with Various Manifold Arrangements

Experimental and numerical investigation on the heat transfer enhancement for Mini-channel heat sinks with tessellated fins

Numerical Analysis of Heat Transfer in a Manifold Microchannel Heat Sink with High Efficient Copper Heat Spreader