Abstract:The stress state is a crucial parameter for the design of innovative microelectromechanical systems based on silicon carbide (SiC) material. Hence, mechanical properties of such structures highly depend on the fabrication process. Despite significant progresses in thin-film growth and fabrication process, monitoring the strain of the suspended SiC thin-films is still challenging. However, 3C-SiC membranes on silicon (Si) substrates have been demonstrated, but due to the low quality of the SiC/Si heteroepitaxy, high levels of residual strains were always observed. In order to achieve promising self-standing films with low residual stress, an alternative micromachining technique based on electrochemical etching of high quality homoepitaxy 4H-SiC layers was evaluated. This work is dedicated to the determination of their mechanical properties and more specifically, to the characterization of a 4H-SiC freestanding film with a circular shape. An inverse problem method was implemented, where experimental results obtained from bulge test are fitted with theoretical static load-deflection curves of the stressed membrane. To assess data validity, the dynamic behavior of the membrane was also investigated: Experimentally, by means of laser Doppler vibrometry (LDV) and theoretically, by means of finite element computations. The two methods provided very similar results since one obtained a Young's modulus of 410 GPa and a residual stress value of 41 MPa from bulge test against 400 GPa and 30 MPa for the LDV analysis. The determined Young's modulus is in good agreement with literature values. Moreover, residual stress values demonstrate that the fabrication of low-stressed SiC films is achievable thanks to the micromachining process developed.

Deformations of Single-Crystal Silicon Circular Plate: Theory and Experiment

Atomistic Investigations of Single-Crystal Silicon with Pre-Existing Defects

Low Amplitude Cyclic Deformation Behavior of Single Crystalline Silicon

Incompatible Deformations in Hyperelastic Plates

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

Simulation Of Near-Crack-Tip Strain Fields On Single-Crystal Silicon Wafer

Large deformation analysis of single-crystalline nanoplates with cubic anisotropy

Determination of the Strain Tensor and the Elastic Stress Fields in a Diamond Plate with a High Bending Curvature Using Local Laue Diffraction Data

Optical anisotropy and strain-induced birefringence in dislocation-free silicon single crystals

Eliciting stable nanoscale fracture in single-crystal silicon

Anisotropic Deformation of 4H-Sic Wafers: Insights from Nanoindentation Tests

In Situ Tem Study of Deformation-Induced Crystalline-To-Amorphous Transition in Silicon

Molecular dynamics study of tensile-compressive behavior of silicon steel single crystal

Towards a deeper understanding of plastic deformation in mono-crystalline silicon

Nanoindentation of polysilicon and single crystal silicon: Molecular dynamics simulation and experimental validation

Deformation Behavior and Fracture Strength of Single‐Crystal 4H‐SiC Determined by Microcantilever Bending Tests

Nanoindentation Characterization of Single-Crystal Silicon with Oxide Film

Deformation, lattice instability, and metallization during solid-solid structural transformations under general applied stress tensor: example of Si I -> Si II

Investigation of the Young's Modulus and the Residual Stress of 4H-SiC Circular Membranes on 4H-SiC Substrates

Band gap reduction in highly-strained silicon beams predicted by first-principles theory and validated using photoluminescence spectroscopy

The Effect of Chemical–Mechanical Processing of Silicon Wafers on Their Surface Morphology and Strength