Abstract:Porous Al2TiO5 ceramics have drawn increasing attention in diverse applications owing to their low thermal expansion coefficient, and good resistance to thermal shock; however, Al2TiO5 ceramics prepared in previous studies still exhibited a relatively high density, which limited their further application in the field of high-temperature thermal insulation. Herein, we reported the successful fabrication of hierarchically porous Al2TiO5 ceramics with a unique three-dimensional skeleton structure formed by overlapped ceramic nanofibers. Results show that the introduction of SiO2 into Al2TiO5 nanofibers could significantly improve their thermal stability and meanwhile reduce their formation temperature. Al2TiO5 nanofibers with 10 mol% SiO2 exhibited a superior microstructure and excellent thermal stability, and were selected as the raw material in the subsequent preparation of corresponding porous ceramics. Porous Al2TiO5 ceramics prepared by the freeze-gel casting exhibited a unique hierarchical pore structure with large pores originating from the sublimation of ice crystal and small pores formed by the overlapped of fibers. This unique microstructure endowed porous ceramics with an ultra-high porosity (97.59–95.59%), ultra-low thermal conductivity (0.0456–0.0754 W m−1 K−1) and excellent thermal stability. Owing to these outstanding characteristics, the resulting porous Al2TiO5 ceramics are expected to be employed as the high-temperature thermal insulation material in a wide spectrum of advanced applications.

Ultra-low shrinkage and high-strength porous TiB/TiB2 ceramics via low temperature in-situ reaction sintering combined with the freeze-drying method

A simple approach to porous low-temperature-sintering BaTiO 3

High-Strength Porous Titanium Diboride Ceramics: Microstructure and Mechanical Properties

Preparation and characterization of porous TiB2 ceramic three-dimensional interconnected skeleton

Fabrication and Mechanical Properties of Porous Tib2 Ceramic

Fabrication and Characterization of Porous TiB2 Ceramic with Three-Dimensional Interconnected Skeleton

Low sintering shrinkage and high strength of porous mullite–zirconia ceramics: Effect of AlF3 and ZrSi2 contents

Controlling the Structure and Mechanical Properties of Porous B4C Ceramics with Unidirectionally Aligned Channels Using Sintering Additives

Microstructure and mechanical properties of TiB2-40 wt% TiC composites: Effects of adding a low-temperature hold prior to sintering at high temperatures

Microstructure Transformation and Mechanical Properties of TiC–TiB2 Ceramics Prepared by Combustion Synthesis in High Gravity Field

Fabrication of Porous Al2TiO5-Al2O3 Ceramics Using Al2O3 Hollow Spheres Coated with TiO2 Sol

Low Sintering Shrinkage Porous Mullite Ceramics with High Strength and Low Thermal Conductivity Via Foam‐gelcasting

Porous Silica Ceramics with Uniform Pores from the In-Situ Foaming Process of Silica Poly-Hollow Microspheres in Inert Atmosphere

A Novel Way to Fabricate Highly Porous Fibrous YSZ Ceramics with Improved Thermal and Mechanical Properties

Hierarchically porous Al2TiO5 ceramics via freeze-gel casting

Near‐net‐size Preparation of Porous Mullite Matrix Ceramics with in Situ Formed 3D Mullite Whisker Network

Pore and Microstructure Change Induced by SiC Whiskers and Particles in Porous TiB2–TiC–Ti3SiC2 Composites

The Thermal, Electrical and Mechanical Properties of Porous Α-Sic Ceramics Bonded with Ti3SiC2 and Β-Sic Via Low Temperature In-Situ Reaction Sintering

Ultra-high-porosity Zirconia Ceramics Fabricated by Novel Room-Temperature Freeze-Casting

Preparation of Porous YB4 Ceramics Using a Combination of In-Situ Borothermal Reaction and High Temperature Partial Sintering