Abstract:Development of nonprecious metal catalysts for oxygen reduction reaction (ORR) to reduce or eliminate Pt-based electrocatalysts is of great importance for fuel cells. Herein, Co/N-codoped carbon with carbon nanofiber (CNF) interconnected three-dimensional (3D) frameworks and graphitic carbon-encapsulated Co nanoparticles were designed and successfully prepared via the in situ growth of zeolitic imidazolate framework-67 (ZIF67) with biomass nano-microfibrillar cellulose (MFC) and then pyrolysis. The catalyst (Co/) exhibited outstanding long-term catalytic durability with 92.7% current retention after 70 000 s, which was much higher than that of commercial Pt/C in alkaline media. The support and connection of CNFs to Co/N-C frameworks and the protection of Co nanoparticles by graphite layers contribute to their impressive long-term catalytic stability. Meanwhile, Co/ displayed excellent ORR catalytic performance (E0 = 0.952 V vs RHE, E1/2 = 0.852 V vs RHE, and n: 4.2) in alkaline media. This strategy provides new insights into developing advanced nonprecious metal carbon-based catalysts for ORR.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12069?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12069</a>.High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and the corresponding element distribution maps (a,b) of Co/N-C; Raman spectra of Co/N-C, Co/, and CNFs; N2 adsorption/desorption isotherms and H–K pore size distributions (inset: BJH pore size distributions) of ZIF67 and ; LSV curves and K–L plots of Co/N-C (a,b) in 0.1 M KOH at 10 mV s–1; I–t chronoamperometric response of Co/N-C, Co/, and Pt/C 20% with 1600 rpm rotation speed in 0.5 M H2SO4 for 10 000 s (a) and I–t chronoamperometric response of Co/N-C and Co/ with a rotation speed of 1600 rpm in O2-bubbled 0.5 M H2SO4 for 70 000 s (b); elemental composition of the as-prepared samples tested by XPS and Co content determined by ICP (Table S1); comparison of ORR activity and stability between Co/ and other reported electrocatalysts (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12069/suppl_file/am0c12069_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

CoFe alloy embedded in N-doped carbon nanotubes derived from triamterene as a highly efficient and durable electrocatalyst beyond commercial Pt/C for oxygen reduction

Highly Active Cofe Alloy Nanoparticlesencapsulated in N-Doped Carbon Nanostructures for Oxygen Reduction Reaction in Both Alkaline and Acidic Media

A highly active and durable iron/cobalt alloy catalyst encapsulated in N-doped graphitic carbon nanotubes for oxygen reduction reaction

Prussian blue analogues derived iron-cobalt alloy embedded in nitrogen-doped porous carbon nanofibers for efficient oxygen reduction reaction in both alkaline and acidic solutions

Co–Fe Alloy Nanoparticles and Fe3C Nanocrystals on N-doped Biomass-Derived Porous Carbon for Superior Electrocatalytic Oxygen Reduction

Theophylline-regulated pyrolysis synthesis of nitrogen-doped carbon nanotubes with iron-cobalt nanoparticles for greatly boosting oxygen reduction reaction

Construct N -doped carbon anchored CoFe alloy nanoparticles with high content graphitic-N for electrocatalytic oxygen reduction

Highly active CoFe alloy nanoparticles encapsulated in N-doped carbon nanostructures for oxygen reduction reaction in both alkaline and acidic media

Improving the Catalytic Performance of Co/N/C Catalyst for Oxygen Reduction Reaction by Alloying with Fe

Achieving efficient oxygen reduction on ultra-low metal-loaded electrocatalysts by constructing well-dispersed bimetallic sites and interconnected porous channels

Adding Fe/dicyandiamide to Co-MOF to greatly improve its ORR/OER bifunctional electrocatalytic activity

N-doped Bamboo-Like CNTs Combined with CoFe–CoFe2O4 As a Highly Efficient Electrocatalyst Towards Oxygen Evolution

Encapsulation of Fe Nanoparticles into an N-doped Carbon Nanotube/nanosheet Integrated Hierarchical Architecture As an Efficient and Ultrastable Electrocatalyst for the Oxygen Reduction Reaction.

Effective Oxygen Reduction Reaction Performance of FeCo Alloys In Situ Anchored on Nitrogen-Doped Carbon by the Microwave-Assistant Carbon Bath Method and Subsequent Plasma Etching

ZIF-8/ZIF-67-Derived Co-N-x-Embedded 1D Porous Carbon Nanofibers with Graphitic Carbon-Encased Co Nanoparticles As an Efficient Bifunctional Electrocatalyst

A novel 3D hybrid carbon-based conductive network constructed by bimetallic MOF-derived CNTs embedded nitrogen-doped carbon framework for oxygen reduction reaction

ZIF67@MFC-Derived Co/N-C@CNFs Interconnected Frameworks with Graphitic Carbon-Encapsulated Co Nanoparticles as Highly Stable and Efficient Electrocatalysts for Oxygen Reduction Reactions

Self-Templating Synthesis of N/P/Fe Co-Doped 3D Porous Carbon for Oxygen Reduction Reaction Electrocatalysts in Alkaline Media

Iron, Cobalt, and Nitrogen Tri‐Doped Ordered Mesoporous Carbon As a Highly Efficient Electrocatalyst for Oxygen Reduction Reaction

Graphitic carbon wrapped Co on Zn, Co, N-codoped 3D tremella-like carbon with abundant nanocages for high-performance oxygen reduction

Hydrogel derived FeCo/FeCoP embedded in N, P-codoped 3D porous carbon framework as a highly efficient electrocatalyst for oxygen reduction reaction