ZIF67@MFC-Derived Co/N-C@CNFs Interconnected Frameworks with Graphitic Carbon-Encapsulated Co Nanoparticles as Highly Stable and Efficient Electrocatalysts for Oxygen Reduction Reactions

Hongjie Meng,Yiming Liu,Haoran Liu,Supeng Pei,Xianxia Yuan,Hong Li,Yongming Zhang
DOI: https://doi.org/10.1021/acsami.0c12069
2020-08-20
Abstract:Development of nonprecious metal catalysts for oxygen reduction reaction (ORR) to reduce or eliminate Pt-based electrocatalysts is of great importance for fuel cells. Herein, Co/N-codoped carbon with carbon nanofiber (CNF) interconnected three-dimensional (3D) frameworks and graphitic carbon-encapsulated Co nanoparticles were designed and successfully prepared via the in situ growth of zeolitic imidazolate framework-67 (ZIF67) with biomass nano-microfibrillar cellulose (MFC) and then pyrolysis. The catalyst (Co/) exhibited outstanding long-term catalytic durability with 92.7% current retention after 70 000 s, which was much higher than that of commercial Pt/C in alkaline media. The support and connection of CNFs to Co/N-C frameworks and the protection of Co nanoparticles by graphite layers contribute to their impressive long-term catalytic stability. Meanwhile, Co/ displayed excellent ORR catalytic performance (<i>E</i><sub>0</sub> = 0.952 V vs RHE, <i>E</i><sub>1/2</sub> = 0.852 V vs RHE, and <i>n</i>: 4.2) in alkaline media. This strategy provides new insights into developing advanced nonprecious metal carbon-based catalysts for ORR.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12069?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12069</a>.High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and the corresponding element distribution maps (a,b) of Co/N-C; Raman spectra of Co/N-C, Co/, and CNFs; N<sub>2</sub> adsorption/desorption isotherms and H–K pore size distributions (inset: BJH pore size distributions) of ZIF67 and ; LSV curves and K–L plots of Co/N-C (a,b) in 0.1 M KOH at 10 mV s<sup>–1</sup>; <i>I</i>–<i>t</i> chronoamperometric response of Co/N-C, Co/, and Pt/C 20% with 1600 rpm rotation speed in 0.5 M H<sub>2</sub>SO<sub>4</sub> for 10 000 s (a) and <i>I</i>–<i>t</i> chronoamperometric response of Co/N-C and Co/ with a rotation speed of 1600 rpm in O<sub>2</sub>-bubbled 0.5 M H<sub>2</sub>SO<sub>4</sub> for 70 000 s (b); elemental composition of the as-prepared samples tested by XPS and Co content determined by ICP (Table S1); comparison of ORR activity and stability between Co/ and other reported electrocatalysts (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12069/suppl_file/am0c12069_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?
### Problems the Paper Aims to Solve The paper aims to develop an efficient and stable non-precious metal catalyst for the oxygen reduction reaction (ORR) to reduce or replace the commonly used platinum-based electrocatalysts in fuel cells. Specifically, the researchers designed and successfully prepared a three-dimensional (3D) framework material based on cobalt and nitrogen co-doped carbon (Co/N-C), which consists of interconnected carbon nanofibers (CNFs) and cobalt nanoparticles (Co nanoparticles) wrapped in a graphite carbon layer. This catalyst exhibits excellent long-term catalytic stability and efficient ORR catalytic performance in alkaline media. ### Main Issues and Solutions 1. **Limitations of Platinum-based Catalysts**: - Platinum-based catalysts are expensive, have limited reserves, and face various stability issues, restricting their large-scale commercial application. - The researchers proposed a non-precious metal catalyst based on cobalt and nitrogen co-doped carbon (Co/N-C) to replace platinum-based catalysts. 2. **Long-term Stability of Catalysts**: - Non-precious metal catalysts (such as M/N-C) tend to undergo metal dissolution and carbon oxidation during long-term use, leading to a decline in catalytic activity. - By increasing the degree of graphitization and protecting metal nanoparticles with a graphite carbon layer, the long-term stability of the catalyst can be effectively improved. 3. **Preparation Method of the Catalyst**: - Using nanofibrillated cellulose (MFC) as a template, Co/N-C@CNFs with an interconnected 3D framework structure were prepared by in-situ growth of zeolitic imidazolate framework-67 (ZIF67) followed by pyrolysis. - This method not only improves the dispersion and graphitization degree of the catalyst but also enhances its long-term stability. ### Experimental Results - **Morphology and Structural Characterization**: - SEM and TEM images show that Co/N-C@CNFs have a clear polyhedral framework structure, with Co nanoparticles uniformly dispersed and completely wrapped by a graphite carbon layer. - Compared to Co/N-C without CNFs, Co/N-C@CNFs exhibit a higher degree of graphitization and a smoother surface. - **Electrocatalytic Performance**: - In alkaline media, Co/N-C@CNFs have a higher onset potential (E0=0.952 V vs. RHE) and half-wave potential (E1/2=0.852 V vs. RHE) than commercial Pt/C catalysts. - In acidic media, Co/N-C@CNFs also show good ORR catalytic performance, although slightly lower than in alkaline media. ### Conclusion By introducing carbon nanofibers (CNFs) and a graphite carbon layer, the researchers successfully prepared an efficient and stable Co/N-C@CNFs catalyst, which exhibits excellent ORR catalytic performance and long-term stability in alkaline media. This strategy provides new insights for the development of advanced non-precious metal carbon-based catalysts.