Abstract:This study focuses on the investigation and comparison of combustion characteristic parameters and combustion performance indices between fast-growing trees and agricultural residues as biomass sources. The investigation is conducted through direct combustion in an air environment using a thermogravimetric analyzer (TGA). Additionally, partial least squares regression (PLSR)-based models were developed to assess combustion performance indices via near-infrared spectroscopy (NIRS), serving as a non-destructive alternative method. The results obtained through the TGA reveal that, specifically, fast-growing trees display higher average ignition temperature (227 °C) and burnout temperature (521 °C) in comparison to agricultural residues, which exhibit the values of 218 °C and 515 °C, respectively. Therefore, fast-growing trees are comparatively difficult to ignite, but sustain combustion over extended periods, yielding higher temperatures. However, despite fast-growing trees having a high ignition index (Di) and burnout index (Df), the comprehensive combustion performance (Si) and flammability index (Ci) of agricultural residue are higher, indicating the latter possess enhanced thermal and combustion reactivity, coupled with improved combustion stability. Five distinct PLSR-based models were developed using 115 biomass samples for both chip and ground forms, spanning the wavenumber range of 3595–12,489 cm−1. The optimal model was selected by evaluating the coefficients of determination in the prediction set (R2P), root mean square error of prediction (RMSEP), and RPD values. The results suggest that the proposed model for Df, obtained through GA-PLSR using the first derivative (D1), and Si, achieved through full-PLSR with MSC, both in ground biomass, is usable for most applications, including research. The model yielded, respectively, an R2P, RMSEP, and RPD, which are 0.8426, 0.4968 wt.% min−4, and 2.5; and 0.8808, 0.1566 wt.%2 min−2 °C−3, and 3.1. The remaining models (Di in chip and ground, Df, and Si in chip, and Ci in chip and ground biomass) are primarily applicable only for rough screening purposes. However, including more representative samples and exploring a more suitable machine learning algorithm are essential for updating the model to achieve a better nondestructive assessment of biomass combustion behavior.

Combustion of raw biogas/hot air in a porous radiant burner and performance prediction using a machine learning algorithm

Impact of porous materials on the performance of a biogas porous burner

Lean Biogas-Air Mixture Combustion on Porous Burner with a Flamethrower Ignition System

Experimental and Numerical Study on the Combustion Characteristics of Premixed Methane/Air in Porous Media Burner

Comparative study of machine learning methods integrated with different optimisation algorithms for prediction of thermal performance and emissions in a pellet stove

Numerical Study on the Characteristics of Methane Hedging Combustion in a Heat Cycle Porous Media Burner

Syngas Production from CO 2 /CH 4 Rich Combustion in a Porous Media Burner: Experimental Characterization and Elementary Reaction Model

Numerical Analysis of the Combustion in Micro Gas Turbine with Methane/Biogas Fuels

Partial oxidation of methane in a reciprocal flow porous burner with an external heat source

A Numerical and Experimental Performance Assessments of an Improved Natural Draft Biomass Cook Stove

Numerical analysis of oxygen enrichment in a self-recuperative radiant-tube burner

Experimental study on the premixed lean-burn in alumina particles based porous burner

Numerical Predictions on the Influences of Inlet Temperature and Pressure of Feed Gas on Flow and Combustion Characteristics of Oxy-pulverized Coal Combustion

Experimental and computational (Chemical Kinetic + CFD) analyses of Self-Recuperative annular tubular porous burner for NH 3 /CH 4 -air Non-Premixed combustion

Prediction of three-phase product distribution and bio-oil heating value of biomass fast pyrolysis based on machine learning

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

Optimization of performance and emission characteristics of liquid fuel fired porous medium burner using RSM and desirability approach

Temperature control of porous media burner based on advanced reduced instruction machine-PID algorithm and embedded processor

Near-Infrared Spectroscopy Modeling of Combustion Characteristics in Chip and Ground Biomass from Fast-Growing Trees and Agricultural Residue

Numerical Study on Combustion Characteristics of Biogas Cocombustion in a 300MW Coal-Fired Boiler Furnace

An Experimental And Response-Surface-Based Optimization Approach Towards Production Of Producer Gas In A Circulating Fluidized Bed Gasifier Using Blends Of Renewable Fibre-Based Biomass Mixtures