Abstract:In developing countries, energy demand from biomass has increased due to exponential population growth. This has translated into voluminous quantities of wood being used. The situation is exacerbated by the popular use of inefficient stoves with low thermal insulation, hence contributing to deforestation. In this study, the performance of a cooking stove improved with sawdust as an insulation material was assessed. An insulated fire stove prototype of 26 cm saucepan diameter was designed, constructed, and cast with sawdust and clay in a ratio of 1 : 1 (as the first layer) and sawdust alone as the second layer. The developed stove was tested using a water boiling test to establish its operating performance. The thermal efficiency of the stove was assessed using indigenous wood fuels used in rural Uganda (Senna spectabilis, Pinus caribaea, and Eucalyptus grandis). Computational fluid dynamics was used to simulate the temperature and velocity fields within the combustion chamber and for generating temperature contours of the stove. Obtained results indicated that S. spectabilis had the highest thermal efficiency of 35.5 ± 2.5%, followed by E. grandis (25.7 ± 1.7%) and lastly P. caribaea (19.0 ± 1.2%) in the cold start phase when compared with traditional stoves. The stove remained cold as hot air was restricted to the combustion chamber with decreasing temperature contours toward the outer wall up to the ambient temperature. The velocity flow remained constant as the chamber was colored green throughout due to the shielding of the stove with sawdust as insulation. The heat flux generated indicated that a thick layer of 6 cm or more could ensure good insulation, and this could be further reduced by introducing more sawdust. The designed stove has the potential to reduce biomass consumption and emissions when compared to traditional cookstoves. The inclusion of a chimney draught in the fire stove prototype could reduce smoke and increase thermal efficiency. Further studies should focus on minimizing the thickness of the clay-sawdust (first) layer and increasing the thickness of the sawdust layer to reduce the weight of the fire stove.

A Numerical and Experimental Performance Assessments of an Improved Natural Draft Biomass Cook Stove

Design Optimization of an Improved Mud Cookstove Using Computational Fluid Dynamics

Design Improvement, Thermal Efficiency Optimization and Comparative Study of a Natural Draft Chulha

MODELLING AND FLUID DYNAMIC ANALYSIS OF COMBUSTION PROCESS AND ENERGY EFFICIENCY OF A DIGITAL STOVE FOR DOMESTIC APPLICATION

Performance Characteristics of a Cooking Stove Improved with Sawdust as an Insulation Material

Performance of Cooking Stoves with Biomass Pellet Fuel

Optimizing Supply Airflow and Its Distribution Between Primary and Secondary Air in a Forced-Draft Biomass Pellet Stove.

Characterizing Dynamic Relationships Between Burning Rate and Pollutant Emission Rates in a Forced-Draft Gasifier Stove Consuming Biomass Pellet Fuels.

Comparative evaluation of thermal and emission performances for improved commercial coal-fired stoves in China

Efficiencies and Pollutant Emissions from Forced-Draft Biomass-Pellet Semi-Gasifier Stoves: Comparison of International and Chinese Water Boiling Test Protocols

Improving Combustion Technology for Cooking Activities for Pollutant Emission Reduction and Carbon Neutrality

Improving the Energy Efficiency of Stoves To Reduce Pollutant Emissions from Household Solid Fuel Combustion in China

An Investigation of Rotary Cup Burner Assembly with Three Vehicle-Mounted Cooking Stoves by Numerical Evaluation Method

A User-Centered, Iterative Engineering Approach for Advanced Biomass Cookstove Design and Development

Numerical Simulation Study on the Thermal Efficiency of Hot Blast Stoves

Pollutant emissions and energy efficiency of Chinese gasifier cooking stoves and implications for future intervention studies.

The Impact of Cookstove Operation on PM2.5 and CO Emissions: A Comparison of Laboratory and Field Measurements.

The Impact of Oxygen Content in the Primary Air Supply on Fuel Burning Rate and Pollutant Emissions in a Forced-Draft Biomass Stove

Experimental Investigation and Mathematical Modelling of Wood Combustion in A Moving Grate Boiler

Wood stove combustion modeling and simulation: Technical review and recommendations

Experimental and comparative study of Chinese commercial improved coal-fired cooking and space-heating stoves