The Impact of Oxygen Content in the Primary Air Supply on Fuel Burning Rate and Pollutant Emissions in a Forced-Draft Biomass Stove

Mengsi Deng,Yazhou Nie,Yanping Yuan,Rongjiang Ma,Ming Shan,Xudong Yang
DOI: https://doi.org/10.1016/j.fuel.2022.124129
IF: 7.4
2022-01-01
Fuel
Abstract:Forced-draft biomass stoves have been proposed as a substitute for traditional solid fuel stoves in rural areas. The change in the O-2 content of the supply air via flue gas recirculation (FGR) significantly affects the combustion and pollutant emission performances of this household stove type, which has not been thoroughly investigated. In this study, O-2 content control system was designed to accurately adjust the O-2 content of the primary air supply for a typical household forced-draft biomass stove. Then, six conditions with an O-2 content of 16%, 17%, 18%, 19%, 20%, and 21% were tested. The dynamic burning rate and emission rates of carbon monoxide (CO), nitrous oxides (NOx), and particulate matter with an aerodynamic diameter <= 2.5 mu m (PM2.5) were measured for each O-2 content. The results showed that the average burning rate of the six O-2 contents ranged from 9.6 to 16.9 g/min. There was a positive linear relationship between the average burning rate and the O-2 content in the primary air supply. The CO and PM2.5 emission amounts exhibited the concave and convex quadratic relationships with O-2 content, respectively, while trends in NOx emission amount had a negative linear relationship with the O-2 content. The real-time burning rate and pollutant emission rates exhibited different trends that influenced the amount of emissions. When FGR was utilized with a constant primary airflow rate, an O-2 content of 19.7% may be optimal for household biomass stoves. This study provides basic information on air supply design of household biomass stoves, which is essential for future clean stove design and improvement.
What problem does this paper attempt to address?