Numerical analysis of oxygen enrichment in a self-recuperative radiant-tube burner

Alex M. García,Yefferson López,Andrés A. Amell

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2023.125154

IF: 5.2

2024-02-11

International Journal of Heat and Mass Transfer

Abstract:The effect of oxygen enrichment on the performance of a self-recuperative radiant tube burner (RTB) was evaluated. Reynolds-Averaged Navier Stock (RANS) Fluid Dynamic Simulations (CFD) are performed on a non-recirculating radian tube burner with fuel-oxidant mixing and primary combustion reactions occurring inside a combustion chamber rather than in the radiant tube. The radiant tube burner is intended for drying applications with an operating surface temperature of around 950 K. Oxygen concentrations in the oxidant ranging from pure air to pure oxygen are evaluated, and the effect of oxygen enrichment on the flame structure, heat transfer, and burner performance is analyzed. The recuperative part of the RTB was also included in the analysis. The effect of O 2 content, flue gas temperature, and mass flow rate on the performance of the heat exchanger is evaluated, and a correlation to describe the oxidant preheat temperature is calibrated with the data from the simulations. Oxygen enrichment significantly impacts the performance of the self-recuperative radiant tube burner. The mean radiant tube temperature and the radiation efficiency rise with increasing oxygen enrichment until it reaches a peak value around 40% O 2 for the burner evaluated; beyond this value, the efficiency of the RTB begins to decline. The same oxygen enrichment gives the higher energy recovery ratio in the heat exchanger at flow rates corresponding to constant reference thermal power. The position of the flame and the interplay between the variations in specific heat, emissivity, temperature, and flow rate of the gases explain these results.

engineering, mechanical,thermodynamics,mechanics