Abstract:The application of Ti6Al 4V in lightweight structures subjected to impact loads necessitates a comprehensive understanding of its dynamic response under high strain rates to ensure the safety and reliability of these components. In this paper, the macroscopic compressive mechanical behavior of Ti 6Al 4V under high strain rates was investigated through the split-Hopkinson pressure bar (SHPB) technique at both room temperature and 200 °C, followed by microstructure analysis of the compressed specimens, carried out employing a combination of optical microscopy (OM) and electron backscatter diffraction (EBSD), and elastic modulus and hardness measurements, performed by a nanoindentation instrument. At room temperature, both the modulus and strain hardening exponent of Ti 6Al4V exhibited an initial increase before the strain rate reached 1000 s -1 , after which they decreased at 3400 s -1 . Meanwhile, the flow stress continued to rise with increasing strain rate. Microscopic observations revealed that twinning played a substantial role in the strain hardening effects. Notably, the basal slip system of the hcp (hexagonal close packed) α phase did not display a more favorable trend, while the c+a type slip systems became more active. Under a strain rate of 5000 s -1 , discontinuous dynamic recrystallization emerged as the dominant mechanism, resulting in an increased frequency of low-angle grain boundaries, as well as a reduction in grain size and dislocation density. These results provide a basis for explaining the mechanical behavior of Ti 6Al 4V under high strain rates and offer insights for the establishment of material models that take into account microstructure deformation mechanisms.

The dynamic mechanical response of Al2O3 and TiB2 particulate reinforced aluminum matrix composites produced by in-situ reaction

FLEXURAL STRENGTH OF IN-SITU REACTION PROCESSED Al2O3-Al3Ti-Al COMPOSITES

In Situal3ti–al2o3 Intermetallic Matrix Composite: Synthesis, Microstructure, and Compressive Behavior

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Compressive response and microstructural evolution of in-situ TiB2 particle-reinforced 7075 aluminum matrix composite

High Strain Rate Response of In-Situ TiB2/7055 Composite by Taylor Impact

Mechanical responses of in-situ TiB2/7050 composite subjected to monotonic and cyclic loadings: A comparative study with 7050-Al

Mechanical properties of rapidly solidified Al-Ti alloys after thermal exposure

Hot deformation behavior of in-situ nanosized TiB2 particulate reinforced AZ91 Mg matrix composite

Effect of strain rate on the mechanical properties of a tungsten particle reinforced titanium matrix composite

High strain rate mechanical behavior of Ti-6Al-4V with micro–macro correlation under compressive loading

Study on thermal deformation behavior and microstructural evolution of 2 wt. % Al–Ti–C/7075Al composite materials

Mechanism of Toughening in Tic Particulate Reinforced Al2o3

Mechanical Properties and Constitutive Model of Aluminum Powder/rubber Matrix Composites Compressed at Various Strain Rates

Dynamic Mechanical Properties of Ti–Al3Ti–Al Laminated Composites: Experimental and Numerical Investigation

Effect of TiB2 particles on thermal deformation behavior and mechanical properties of aluminum alloy

Study on dynamic mechanical properties and constitutive model of 10B/Al composite compared with its matrix of high-purity aluminum

Microstructure evolution, deformation behavior and manufacture design of TiAl matrix composites reinforced with in-situ borides precipitation

Thermo⁻Mechanical Behavior and Constitutive Modeling of In Situ TiB2/7050 Al Metal Matrix Composites Over Wide Temperature and Strain Rate Ranges

High Strain Rate Superplasticity of in situ Al 3 Zr/6063Al Composites