Abstract:A composite titania thin film consisted of quasi-aligned single-crystalline rutile nanorods embedded in sol-gel-derived anatase aggregates was fabricated and its photoelectrochemical behavior was studied in detail. A monolayer of nearly sing I e-crystal line rutile nanorods was first deposited on metallic Ti substrates through a controlled reaction between Ti and hydrogen peroxide. The gaps among the rutile nanorods were then filled with titania nanoparticles through a sol-gel dip-coating approach, which achieved a composite thin film of single-crystalline rutile nanorods embedded in anatase aggregates, after a subsequent thermal treatment at 723 K. The X-ray diffraction measurement revealed that the composite film with thickness of 180 nm contained anatase and rutile in a nearly 50:50 ratio. The UV-visible diffusive reflectance spectra estimated a band gap of 2.99 eV for the rutile monolayer and a slightly increased value of 3.03 eV for the composite film due to the embedding of the anatase nanoparticles. Photocurrent versus potential diagrams, photocurrent transient curves, and open-circuit potential measurement supported the fact that the anatase nanoparticles possessed better inherent photoelectrochemical properties than rutile. However, electrochemical impedance spectra characterization, together with photocurrent transient curves and open-circuit potential measurement, suggests that the single-crystalline rutile nanorods exhibited a higher electron-transfer rate. The combination of the two components in such an appropriate way enhanced significantly the charge separation effect arising from the anatase/rutile couple, which hence combined efficiently the "mixed crystal effect" and the "mixed morphological effect". A steady-state photocurrent more than double the simple sum of those generated by the two components alone was detected for the current composite film, which can be attributed to the single-crystalline rutile nanorods that provide channels for rapid electron transfer to the conductive Ti substrates under an applied bias potential. As a result, this study concludes that the present nanostructure magnified significantly the well-established mixed crystal effect, that is, an enhanced charge separation arising from a mixture of anatase and rutile.

Double-sided semitransparent titania photoelectrode with enhanced light harvesting

CdS/ZnS Co-Sensitized Hierarchical TiO2Nanotree Array with Rutile/Anatase Junctions for Enhanced Photoelectrochemical Performance

Construction of TiO2 NP@TiO2 NT Double-Layered Structural Photoanode to Enhance Photovoltaic Performance of CdSe/CdS Quantum Dots Sensitized Solar Cells

A novel approach to titania nanowire arrays as photoanodes of back-illuminated dye-sensitized solar cells

Enhanced Photoelectrochemical Response of a Composite Titania Thin Film with Single-Crystalline Rutile Nanorods Embedded in Anatase Aggregates

Semiconductive‐Ferroelectric‐Enhanced Photo‐Electrochemistry with Collective Improvements on Light Absorption, Charge Separation, and Carrier Transportation

Double-layer Electrode Based on TiO2 Nanotubes Arrays for Enhancing Photovoltaic Properties in Dye-Sensitized Solar Cells.

Nanohollow Titanium Oxide Structures on Ti/FTO Glass Formed by Step-Bias Anodic Oxidation for Photoelectrochemical Enhancement

Highly-ordered Dye-Sensitized TiO 2 Nanotube Arrays Film Used for Improving Photoelectrochemical Electrodes

Photoelectrochemical and Electrochemical Activity of Anodic Semitransparent Aligned and Spaced Titania Nanotubes Formed out of Titanium–Silver Alloys

Crystallographic orientation and morphology control of Sb2Se3 to sensitize TiO2 nanotube arrays for enhanced photoelectrochemical performances

Laser-Treated MXene as an Electrochemical Agent to Boost Properties of Semitransparent Photoelectrode Based on Titania Nanotubes

Enhanced Photoelectrochemical Performance by Synthesizing CdS Decorated Reduced TiO2nanotube Arrays

Femtosecond laser mediated fabrication of micro/nanostructured TiO2- photoelectrodes: Hierarchical nanotubes array with oxygen vacancies and their photocatalysis properties

Enhanced Efficiency for Dye-Sensitized Solar Cells Using A Surface-Treated Photo-Anode

Enhanced photoelectrochemical performance by synthesizing CdS decorated reduced TiO2 nanotube arrays

Multi-Layered TiO2 Nanotubes Prepared by Repeated Anodization and Their Photoelectric Performance in Dye-Sensitized Solar Cells

Electric polarization tune enhanced photoelectrochemical performance of visible light active ferroelectric Bi0.5Na0.5TiO3 nanostructure photoanode

Construction of TiO 2 nano-tubes arrays coupled with Ag 2 S nano-crystallites photoelectrode and its enhanced visible light photocatalytic performance and mechanism

Fabrication and Photo-Electrocatalytic Properties of Highly Oriented Titania Nanotube Arrays with {1 0 1} Crystal Face

Fabrication and photo-electrocatalytic properties of highly oriented titania nanotube arrays with {1 0 1} crystal face