Abstract:A low-power, low-phase-noise quadrature oscillator for Medical Implantable Communications Service (MICS) transceivers is presented. The proposed quadrature oscillator generates 349~689 MHz I/Q (In-phase and Quadrature) signals covering the MICS band. The oscillator is based on a differential pair with positive feedback. Each delay cell consists of a few transistors enabling lower voltage operation. Since the oscillator is very sensitive to disturbances in the supply voltage and ground, a self-bias circuit for isolating the voltage disturbance is proposed to achieve bias voltages which can track the disturbances from the supply and ground. The oscillation frequency, which is controlled by the bias voltages, is less sensitive to the supply and ground noise, and a low phase noise is achieved. The chip is fabricated in the UMC (United Microelectronics Corporation) 0.18 μm CMOS (Complementary Metal Oxide Semiconductor) process; the core just occupies a 28.5 × 22 μm² area. The measured phase noise is -108.45 dBc/Hz at a 1 MHz offset with a center frequency of 540 MHz. The gain of the oscillator is 0.309 MHz/mV with a control voltage from 0 V to 1.1 V. The circuit can work with a supply voltage as low as 1.2 V and the power consumption is only 0.46 mW at a 1.8 V supply voltage.

A Low-Noise Injection-Locked Ring Oscillator for biomedical implants applications

A 3 Mw 54 GHz 0.18 Μm BiCMOS Voltage Controlled Oscillator with Supply Injection Locking

V-Band Injection-Locked Oscillator with 9 Ghz Locking Range

A Low Phase Noise V-Band 40 Nm Cmos Phase Locked Loop For Wireless Communication

1–2 GHz 2 mW injection-locked ring oscillator based phase shifter in 0.18 µm CMOS technology

A 0.8 V Low Power Low Phase-Noise Pll

A K-Band Low-Power Phase Shifter Based on Injection Locked Oscillator in 0.13 Μm CMOS Technology

The Investigation and Optimisation of Phase-Induced Amplitude Attenuation in the Injection-Locked Ring Oscillators-Based Receiver

A Low Power V-Band CMOS Frequency Divider with Wide Locking Range and Accurate Quadrature Output Phases.

A Low-Power Injection-Locked VCO for an Implantable MICS Band Transmitter with Wireless Frequency Reference and Tune-while-Lock Channel Calibration

A 28ghz Injection-Locked Voltage-Controlled Oscillator Pair with Tunable Phase Outputs in 130nm CMOS.

A 3.57-Mw 2.88-Ghz Multi-Phase Injection-Locked Ring-VCO with a 200-Khz 1/f³ Phase Noise Corner

A LOW POWER, LOW PHASE NOISE FBAR OSCILLATOR

A Low-Phase-Noise 8 GHz Linear-Band Sub-Millimeter-Wave Phase-Locked Loop in 22 nm FD-SOI CMOS

New Implementation of Injection Locked Technique and Its Application to Low Phase Noise Quadrature Oscillators

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

A 10 GHz 56 Fsrms-Integrated-jitter and −247 Db FOM Ring-Vco Based Injection-Locked Clock Multiplier with a Continuous Frequency-Tracking Loop in 65 Nm CMOS

A low-phase-noise 900-MHz CMOS ring oscillator with quadrature output

A Low Power Low Phase Noise Oscillator for MICS Transceivers

Low phase noise injection-locked doubler-based quadrature CMOS VCO

X‐band Low Phase Noise In‐phase and Out‐of‐phase Injection‐locked Push–push DRO