Abstract:Supercritical CO2 Brayton cycle has been studied to be used as power conversion system in many fields because of its competitive efficiency and compact structure. When applied to nuclear power systems, cycle parameters that have direct effects on cycle performances will be restricted differently under different reactor designs. At the same time, the small reactor systems based on existing technology and experience in PWR, especially the Small Modular Reactor (SMR), have been favored owing to their advantages on safety, feasibility, and economic benefit. The focus of the present work is on the performances of recuperated S-CO2 Brayton cycle applied to small PWR systems that have a relatively low range of core outlet temperature below 330 oC. The calculation model is based on the laws of thermodynamics and the cycle performance were analyzed. The results show that the inlet parameters of compressor have obvious effects on cycle efficiency due to the radical change of CO2’s thermal physical properties near the critical point. With given reactor outlet temperature and recuperator effectiveness, the cycle efficiency reduces as the compressor inlet temperature rises from 32 to 40 oC. And there exists an optimal compressor inlet pressure to achieve maximum cycle efficiency. Furthermore, this optimal inlet pressure depends on the compressor inlet temperature. It will slightly increase and the maximum cycle efficiency will decrease at elevated compressor inlet temperature. Once the compressor inlet pressure exceeds the optimal value, the influence of compressor inlet temperature on cycle efficiency decreases to negligible. Pinch point is a key consideration for S-CO2 Brayton cycle. Promotion of the recuperator effectiveness can improve the cycle efficiency, but temperature difference at the cold end of recuperator ( ΔTc ) decreases at the same time. Thus the recuperator effectiveness and cycle efficiency has upper limitations to avoid the pinch point. Cycle efficiency shows two extremums according to compressor inlet pressure for given ΔTc . However, the latter situation is not suitable for practical engineering on account of internal pinch point. The results are helpful for the application of S-CO2 Brayton cycle in nuclear power system and provide a basis for subsequent experimental research.

300 MW boiler design study for coal-fired supercritical CO2 Brayton cycle

Thermodynamic Analysis of Coal-Fired Thermal Power Units Coupled S-CO2 Energy Storage System

Study on coal combustion characteristics in a 350MW supercritical tangentially boiler

Experimental and Numerical Study on Thermal Hydraulic Performance of Trapezoidal Printed Circuit Heat Exchanger for Supercritical CO2 Brayton Cycle

Optimal design and thermodynamic evaluation of supercritical CO 2 oxy-coal circulating fluidized bed power generation systems

Process Synthesis of an S-CO2Brayton Cycle Operating at an Ultra-Supercritical Steam Cycle Level

The roadmap towards the efficiency limit for supercritical carbon dioxide coal fired power plant

Numerical analysis and modified thermodynamic calculation methods for the furnace in the 1000 MW supercritical CO2 coal-fired boiler

The comprehensive solution to decrease cooling wall temperatures of sCO2 boiler for coal fired power plant

Multi-objective optimization of supercritical CO 2 Brayton cycles for coal-fired power generation with two waste heat recovery schemes

Experimental test, numerical analysis and thermal calculation modeling of hundreds kW th -class supercritical CO 2 fossil-fired boiler system

Effect of flue gas cooler and overlap energy utilization on supercritical carbon dioxide coal fired power plant

Artificial neural network grey-box model for design and optimization of 50 MWe-scale combined supercritical CO2 Brayton cycle-ORC coal-fired power plant

Performance Improvement Overview of the Supercritical Carbon Dioxide Brayton Cycle

Investigation on the performance of the supercritical Brayton cycle with CO2-based binary mixture as working fluid for an energy transportation system of a nuclear reactor

Design and optimization of waste heat recovery system for supercritical carbon dioxide coal-fired power plant to enhance the dust collection efficiency

Features of Supercritical Carbon Dioxide Brayton Cycle Coupled with Reactor

Conceptual Design Of An 800mwe Supercritical Pressure Circulating Fluidized Bed Boiler And Its Performance Prediction

Design optimization and off-design performance analysis of one-dimensional supercritical CO 2 Brayton cycle

Off-design performance analysis of supercritical CO 2 mixture Brayton cycle with floating critical points

Analysis of supercritical CO2 closed Brayton cycle applied to SMR