Abstract:Supercritical CO2 Brayton cycle has been studied to be used as power conversion system in many fields because of its competitive efficiency and compact structure. When applied to nuclear power systems, cycle parameters that have direct effects on cycle performances will be restricted differently under different reactor designs. At the same time, the small reactor systems based on existing technology and experience in PWR, especially the Small Modular Reactor (SMR), have been favored owing to their advantages on safety, feasibility, and economic benefit. The focus of the present work is on the performances of recuperated S-CO2 Brayton cycle applied to small PWR systems that have a relatively low range of core outlet temperature below 330 oC. The calculation model is based on the laws of thermodynamics and the cycle performance were analyzed. The results show that the inlet parameters of compressor have obvious effects on cycle efficiency due to the radical change of CO2’s thermal physical properties near the critical point. With given reactor outlet temperature and recuperator effectiveness, the cycle efficiency reduces as the compressor inlet temperature rises from 32 to 40 oC. And there exists an optimal compressor inlet pressure to achieve maximum cycle efficiency. Furthermore, this optimal inlet pressure depends on the compressor inlet temperature. It will slightly increase and the maximum cycle efficiency will decrease at elevated compressor inlet temperature. Once the compressor inlet pressure exceeds the optimal value, the influence of compressor inlet temperature on cycle efficiency decreases to negligible. Pinch point is a key consideration for S-CO2 Brayton cycle. Promotion of the recuperator effectiveness can improve the cycle efficiency, but temperature difference at the cold end of recuperator ( ΔTc ) decreases at the same time. Thus the recuperator effectiveness and cycle efficiency has upper limitations to avoid the pinch point. Cycle efficiency shows two extremums according to compressor inlet pressure for given ΔTc . However, the latter situation is not suitable for practical engineering on account of internal pinch point. The results are helpful for the application of S-CO2 Brayton cycle in nuclear power system and provide a basis for subsequent experimental research.

Features of Supercritical Carbon Dioxide Brayton Cycle Coupled with Reactor

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Experimental and Numerical Study on Thermal Hydraulic Performance of Trapezoidal Printed Circuit Heat Exchanger for Supercritical CO2 Brayton Cycle

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

Performance Improvement Overview of the Supercritical Carbon Dioxide Brayton Cycle

An adaptive CO 2 Brayton-Rankine power cycle for efficient utilization of low environment temperature: A thermodynamic analysis and optimization study

Investigation on the performance of the supercritical Brayton cycle with CO2-based binary mixture as working fluid for an energy transportation system of a nuclear reactor

Influence of Supercritical Carbon Dioxide Brayton Cycle Parameters on Intelligent Circulation System and Its Optimization Strategy

Analysis on thermodynamic and economic performances of supercritical carbon dioxide Brayton cycle with the dynamic component models and constraint conditions

Performance of supercritical Brayton cycle using CO2-based binary mixture at varying critical points for SFR applications

Primary Study on Carbon Dioxide Power Cycle of Htgr

New Knowledge on the Performance of Supercritical Brayton Cycle with CO2-Based Mixtures

Process Synthesis of an S-CO2Brayton Cycle Operating at an Ultra-Supercritical Steam Cycle Level

Analysis of supercritical CO2 closed Brayton cycle applied to SMR

Review of supercritical CO2 power cycle technology and current status of research and development

Supercritical CO2 mixture Brayton cycle with floating critical points for concentrating solar power application: Concept and thermodynamic analysis

CO2-based mixture working fluids used for the dry-cooling supercritical Brayton cycle: Thermodynamic evaluation

Design optimization and off-design performance analysis of one-dimensional supercritical CO 2 Brayton cycle

PARAMETRIC INVESTIGATION OF SUPERCRITICAL CARBON DIOXIDE BRAYTON CYCLE FOR HIGH TEMPERATURE GAS-COOLED REACTOR (HTGR)

A review of research on turbines for supercritical carbon dioxide power systems

300 MW boiler design study for coal-fired supercritical CO2 Brayton cycle