Abstract:The inconvenient loading and unloading of a long and heavy drill pipe gives rise to the difficulty in measuring the contour parameters of its threads at both ends. To solve this problem, in this paper we take the SCK230 drill pipe thread-repairing machine tool as a carrier to design and achieve a fast and on-machine measuring system based on a laser probe. This system drives a laser displacement sensor to acquire the contour data of a certain axial section of the thread by using the servo function of a CNC machine tool. To correct the sensor's measurement errors caused by the measuring point inclination angle, an inclination error model is built to compensate data in real time. To better suppress random error interference and ensure real contour information, a new wavelet threshold function is proposed to process data through the wavelet threshold denoising. Discrete data after denoising is segmented according to the geometrical characteristics of the drill pipe thread, and the regression model of the contour data in each section is fitted by using the method of weighted total least squares (WTLS). Then, the thread parameters are calculated in real time to judge the processing quality. Inclination error experiments show that the proposed compensation model is accurate and effective, and it can improve the data acquisition accuracy of a sensor. Simulation results indicate that the improved threshold function is of better continuity and self-adaptability, which makes sure that denoising effects are guaranteed, and, meanwhile, the complete elimination of real data distorted in random errors is avoided. Additionally, NC50 thread-testing experiments show that the proposed on-machine measuring system can complete the measurement of a 25 mm thread in 7.8 s, with a measurement accuracy of ±8 μm and repeatability limit ≤ 4 μm (high repeatability), and hence the accuracy and efficiency of measurement are both improved.

Device for measuring inlay distance from inlay jump-ring slot to cylinder hole bottom of car

Non-vertical end face hole depth measuring tool

Three-Dimensional Measurement System for Inner Surface of Long Tubular Parts Based on White Light Interference

Development of Non-Contact Automatic Thread Measuring Instrument

Real-time Measuring Method to Measure the Micro-Displacement of a Rotating Cutter in Precise Piston Noncylinder Pinhole Boring

Testing Machine for Testing Durability of Material under High-Pressure Hydrogen Circumstance

Measurement and Technological Test on Grinding State Parameters of Bearing Ring Raceway

An Improved Two-Point Real-Time Measuring Method for Radial Micro-Displacement Measurement on High-Speed Smart Boring Bar

Machining Precision Online Measurement of Large Span Pin Hole Using Structured Light

Implementation and Verification of a Dual-Probe Measurement System for Geometric Form Evaluation of a Ring-Type Cylinder

Measuring tool used for measuring locating hole distance

Development of Measuring Instrument for Axial Clearance and Assemble Height of Boxcar Bearings

Device for in-situ measurement of anisotropic parameters of soil body in hole

A Novel Method For The Micro-Clearance Measurement Of A Precision Spherical Joint Based On A Spherical Differential Capacitive Sensor

Local Geometric Measurement for 3-D Curved Micro-Pipe

A New Method to Measure the Taper of Part Hole by Pneumatic-to-current

Design of Elastic Cantilever for Friction Measurement

Tester for measuring weight difference threshold by constant stimulus method

A Fast and On-Machine Measuring System Using the Laser Displacement Sensor for the Contour Parameters of the Drill Pipe Thread

Development of Double-Insulated Ring Sensors for Hollow Pin Preload Measurement

Novel Type of Portable Vacuum Gauge Calibration Apparatus