Abstract:A large number of non-degradable materials have severely damaged the ecological environment. Now, people are increasingly pursuing the use of environmentally friendly materials to replace traditional chemical materials. Polyhydroxyalkonates (PHAs) are receiving increasing attention because of the unique biodegradability and biocompatibility they offer. However, the applications of PHAs are still limited due to high production costs and insufficient study. This project examines the optimal electrospinning parameters for the production of PHA-based fibrous membranes for air filtration. A common biodegradable polyester, Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), was electrospun into a nanofibrous membrane with a well-controlled surface microstructure. In order to produce smooth, bead-free fibers with micron-scale diameters, the effect of the process parameters (applied electric field, solution flow rate, inner diameter of hollow needle, and polymer concentration) on the electrospun fiber microstructure was optimized. The well-defined fibrous structure was optimized at an applied electric field of 20 kV, flow rate of 0.5 mL/h, solution concentration of 12 wt.%, and needle inner diameter of 0.21 mm. The morphology of the electrospun PHBV fibrous membrane was observed by scanning electron microscopy (SEM). Fourier transform infrared (FTIR) and Raman spectroscopy were used to explore the chemical signatures and phases of the electrospun PHBV nanofiber. The ball burst strength (BBS) was measured to assess the mechanical strength of the membrane. The small pore size of the nanofiber membranes ensured they had good application prospects in the field of air filtration. The particle filtration efficiency (PFE) of the optimized electrospun PHBV fibrous membrane was above 98% at standard atmospheric pressure.

Development of Needle-punched Nonwoven Fabrics from Flax Fibers for Air Filtration Applications

Some Studies on Water Permeability of Nonwoven Fabrics

Blend of Fibres to Improve the Mechanical Properties of Needle-Punched Nonwovens for PM2.5 Air Filtration

Air permeability of needle-punched filter media—virgin and recycled polyester

Modulating the structural characteristics of layered nonwoven fabrics devised by fibre fineness for enhanced filtration performance

Optimisation of punching parameters for enhanced filtration performance of non-woven by response surface methodology

The influence of technological parameters on the filtration efficiency of electret needled non-woven fabrics

Virgin and recycled polyester filter media: effect of coating, calender roller pressure and roller temperature on dust filtration

Layered nonwoven filter embodied with packing density gradient measured by X-ray computed tomography for enhanced filtration performance

Investigation of air filter properties of nanofiber non-woven fabric manufactured by a modified melt-blowing method along with flash spinning method

Novel filter material by glass fiber foam laying for nonwoven fabrics

Investigation of Air Filter Properties of Flash-Spinning Nanofiber Non-Woven Fabric

Design and development of non-woven medical product from Wrightia tinctoria fiber

Morphology Engineering of Protein Fabrics for Advanced and Sustainable Filtration

Influence of Electrospinning Parameters on the Morphology of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fibrous Membranes and Their Application as Potential Air Filtration Materials

Air filtration performance of nanofiber membranes with different morphologies produced by green electrospinning

Research on the Advantages of Nanofibrous Air Filtration Membrane

Tensile behavior of virgin and recycled polyester nonwoven filter fabrics

Experimental and CFD analysis of fluid flow through nanofiber filter media

Microscopy of Woven and Nonwoven Face Covering Materials: Implications for Particle Filtration

Assessment of Physical and Mechanical Parameters of Spun-Bond Nonwoven Fabric