Abstract:A large number of non-degradable materials have severely damaged the ecological environment. Now, people are increasingly pursuing the use of environmentally friendly materials to replace traditional chemical materials. Polyhydroxyalkonates (PHAs) are receiving increasing attention because of the unique biodegradability and biocompatibility they offer. However, the applications of PHAs are still limited due to high production costs and insufficient study. This project examines the optimal electrospinning parameters for the production of PHA-based fibrous membranes for air filtration. A common biodegradable polyester, Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), was electrospun into a nanofibrous membrane with a well-controlled surface microstructure. In order to produce smooth, bead-free fibers with micron-scale diameters, the effect of the process parameters (applied electric field, solution flow rate, inner diameter of hollow needle, and polymer concentration) on the electrospun fiber microstructure was optimized. The well-defined fibrous structure was optimized at an applied electric field of 20 kV, flow rate of 0.5 mL/h, solution concentration of 12 wt.%, and needle inner diameter of 0.21 mm. The morphology of the electrospun PHBV fibrous membrane was observed by scanning electron microscopy (SEM). Fourier transform infrared (FTIR) and Raman spectroscopy were used to explore the chemical signatures and phases of the electrospun PHBV nanofiber. The ball burst strength (BBS) was measured to assess the mechanical strength of the membrane. The small pore size of the nanofiber membranes ensured they had good application prospects in the field of air filtration. The particle filtration efficiency (PFE) of the optimized electrospun PHBV fibrous membrane was above 98% at standard atmospheric pressure.

The influence of technological parameters on the filtration efficiency of electret needled non-woven fabrics

Development of Needle-punched Nonwoven Fabrics from Flax Fibers for Air Filtration Applications

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

Optimisation of punching parameters for enhanced filtration performance of non-woven by response surface methodology

Non-woven composites intensification properties for air filters by plasma pre-treatment

Influence of Electrospinning Parameters on the Morphology of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fibrous Membranes and Their Application as Potential Air Filtration Materials

Layered nonwoven filter embodied with packing density gradient measured by X-ray computed tomography for enhanced filtration performance

Blend of Fibres to Improve the Mechanical Properties of Needle-Punched Nonwovens for PM2.5 Air Filtration

Research on the process of preparing fiber filtration membrane by centrifugal blowing electrospinning technology

Filtration efficiency improvement of air filter paper for fine particles by electrospinning technology

The Effects of Pulsed Electrospinning Process Variables on the Size of Polymer Fibers Established with a 23 Factorial Design

Influence of fiber diameter, filter thickness, and packing density on PM2.5 removal efficiency of electrospun nanofiber air filters for indoor applications

Air permeability of needle-punched filter media—virgin and recycled polyester

Utilizing Electrostatic Effect in Fibrous Filters for Efficient Airborne Particles Removal: Principles, Fabrication, and Material Properties

Parameters Affecting the Loading Behavior and Degradation of Electrically Active Filter Materials

Methods for increasing productivity of AC-electrospinning using weir-electrode

Virgin and recycled polyester filter media: effect of coating, calender roller pressure and roller temperature on dust filtration

The influence of non-solvent addition on the independent and dependent parameters in roller electrospinning of polyurethane

Exercising hybrid model to design an optimized electrospun polyamide-6 nanofibrous mat for air filtration applications

Environmental concerns on the use of the electrospinning technique for the production of polymeric micro/nanofibers

Electrospinning of ABS nanofibers and their high filtration performance