Abstract:The worldwide COVID-19 pandemic has led to an attention on the usage of personal protective face masks. However, the longevity and safety of the commercial face masks are limited due to the charge dissipation of the electret meltblown nonwovens, which are dominate in the face mask filters. Herein, we design a type of multi-layer structured nonwovens using meltblowing and electrospinning technologies. The complex nonwovens involving meltblown and electrospun fibers are designed to possess multilevel fiber diameters and pore sizes. The micro/nanofibers with porous and wrinkled surface morphologies can well capture particulate matters (PMs), and the multilevel pore sizes contribute to low air resistance under high filtration efficiency. Airflow field simulation was carried out to understand the pressure distribution within the nonwovens in the filtration process. Meanwhile, by adding Ag nanoparticles (AgNPs) as additives, the nonwovens exhibit excellent antibacterial performance. The resultant nonwovens exhibit filtration efficiency of 99.1% for PM0.3 and low pressure drop of 105 Pa under the 10.67 cm/s inlet air velocity, and antibacterial rate of > 99.99% for Escherichia coli. These performances and functions make the designed complex nonwovens a promising filter core for face masks. Electronic supplementary material: Supplementary material (Fig. S1. The filtration efficiencies of a brand of surgical mask changes with the storage time under the condition of 100% humidity. Fig. S2. The FE-SEM images of the fibers after blocking PMs. Fig. S3. Illustration of 3D structure models of the nonwovens. Fig. S4. Diameter distribution of AgNPs. Table S1. The structure parameters and filtration performances of the PP-M fibers with and without pores and wrinkles. Table S2. Filtration performance of PP-M/PLA-M/PLA-N nonwovens and commercial face masks. Table S3. The structural parameters for the nonwovens. Table S4. The filtration efficiencies and pressure drops of the PP, PE spunbonded nonwovens, and PP-M/PLA-M/PLA-N@AgNPs nonwovens) is available in the online version of this article at 10.1007/s12274-022-4350-2.

Novel filter material by glass fiber foam laying for nonwoven fabrics

Enhanced filtration characteristics of a PTFE foam-coated filter using PTFE nanofibers

Blend of Fibres to Improve the Mechanical Properties of Needle-Punched Nonwovens for PM2.5 Air Filtration

Development of Needle-punched Nonwoven Fabrics from Flax Fibers for Air Filtration Applications

Development of an asymmetric composite PPS-based bag-filter material through membrane laminating and superfine fiber blending: Lab test, field application and development of numerical models

High Filterable Electrospun Nanofibrous Membrane with Charged Electret After Electrification Treatment for Air Filtration

Facile fabrication of reinforced sub-micron fibrous media with hierarchical structure compounded thermally for effective air purification in application

Promoting Electrospun Lignin/PEO Nanofiber for High-Performance CO Filtration

Multi-layered micro/nanofibrous nonwovens for functional face mask filter

Antibacterial, efficient and sustainable CS/PVA/GA electrospun nanofiber membrane for air filtration

Using modified raw materials to fabricate electrospun, superhydrophobic poly(lactic acid) multiscale nanofibrous membranes for air-filtration applications

Novel Ultrafine Fibrous Poly(tetrafluoroethylene) Hollow Fiber Membrane Fabricated by Electrospinning

Bicomponent spunbond filters doped with polytetrafluoroethylene nanoparticles for long-term efficient fine particle removal

Tri-layer gradient structured micro/nanofibrous nonwovens for high filtration efficiency and low air resistance

Ultrathin fluoroacrylic coating wrapped microporous non-woven fabrics as efficient air filtration membranes

The Performance Testing and Analysis of Common New Filter Materials: A Case of Four Filter Materials

Layered nonwoven filter embodied with packing density gradient measured by X-ray computed tomography for enhanced filtration performance

Preparation of porous polylactic acid nanofibers and application in non-electret high-efficiency filtration composites

Free-Standing Ultrafine Nanofiber Papers with High PM0.3 Mechanical Filtration Efficiency by Scalable Blow and Electro-Blow Spinning

Design of Polypropylene Electret Melt Blown Nonwovens with Superior Filtration Efficiency Stability through Thermally Stimulated Charging

Polymer-Decorated Filter Material for Wastewater Treatment: in Situ Ultrafast Oil/Water Emulsion Separation and Azo Dye Adsorption.