Abstract:Accurately assessing the fatigue performance of components is the key to ensuring structural integrity and reliability, but there is a lack of fatigue life prediction methods that effectively couple the stress gradient effect, the non-proportional additional strengthening effect, and the size effect. Accordingly, a fatigue life prediction model for notched specimens under multiaxial loading is established by analyzing the influence of tension–torsion proportional load and tension–torsion non-proportional load on the fatigue strength of notched specimens. Firstly, based on the energy critical plane method, the location of the critical plane is determined with the help of the coordinate transformation principle. Secondly, the material constant is used to quantify the level of cyclic strengthening, and a non-proportional additional strengthening function is proposed by considering the influence of phase difference. Thirdly, the influence of the non-uniform stress field at the notch root on the fatigue life is considered, and the distribution of equivalent stress on the specific paths is extracted and normalized to give an equivalent stress gradient factor. Then, a fatigue strength reduction factor is constructed by considering the influence of different notch geometrical parameters. Finally, a fatigue life assessment method for notched specimens is proposed based on the Manson–Coffin equation. With the help of the test data of three materials, En8, Al7050-T7451, and GH4169, the method is validated and compared with the calculation results of the Manson–Coffin equation, SWT model, and FS model. The results show that the prediction accuracy of the method in this study is high, which is located in the two-fold error dispersion band, and the prediction results are better than that of the other three models.

Application of various low cycle fatigue evaluation rules to notched compact tension specimen test data

A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading

Low-Cycle Fatigue Test of Circular Concrete Filled Tubular Columns

Low-cycle fatigue test of CFT and CCFT columns

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

Low Cycle Fatigue Strength Reduction Factor for a Mild Steel

A Simplified Fatigue Assessment Method for ASME VIII-2

Numerical Analysis of High and Low‐cycle Flexural Fatigue for Reinforced Concrete Beams under Full‐range of Varying Amplitudes

Fatigue assessment of CFST joints using the effective notch stress approach

Low Cycle Fatigue Life Evaluation of Notched Specimens Considering Strain Gradient

An Approach to Estimate the Low Cycle Fatigue Probabilistic Curves of PBF-LB/M 316L Steel from Small Size Datasets Using the Remora Optimization Algorithm

Multiaxial Low Cycle Fatigue Assessment of Notch Specimens for 10crni3mov Steel and Its Welds

Evaluation of Critical Distance, Highly Stressed Volume, and Weakest-Link Methods in Notch Fatigue Analysis

Fatigue life evaluation of notched components affected by multiple factors

A Novel Fatigue Evaluation Approach with Direct Steady Cycle Analysis (DSCA) Based on the Linear Matching Method (LMM)

Low cycle fatigue analysis of welded joints considering material cycling behavior

Notch Fatigue Life Prediction Considering Nonproportionality of Local Loading Path under Multiaxial Cyclic Loading

Extremely low cycle fatigue tests on structural carbon steel and stainless steel

Fatigue Life Prediction of a SAE Keyhole Specimen as a Subcase of Certification by Analysis

A New Method for Low Cycle Fatigue Life Prediction

Evaluation of Fatigue Crack Growth Curves in Existing Codes and A Proposed Modification Based on Experimental Data of Cr-Ni-Mo-V Steel Welded Joints