Abstract:This study examined the water uptake (WU) behavior of recycled high-density polyethylene (RHDPE). The biocomposites made of palm waste Washingtonia (PWW) fibers were treated with 3% sodium bicarbonate (NaHCO 3 ) for 24 h. Several RHDPE materials reinforced with different concentrations of PWW fibers (5 to 30 wt.%) until saturation, or roughly 25 days, were developed to investigate the WU kinetics and diffusion in biocomposites. An artificial neural network (ANN) and the response surface methodology (RSM) methods were applied to model the behavior of uptake measured in experiments and optimize the immersion period and PWW fiber content in RHDPE/PWW biocomposite WU. The WU moved swiftly during the first test phase and was completed after 400 h of soaking. The outcomes demonstrated a perfect fit between the observed and anticipated data. Findings showed that the ANN models' training, test, and validation correlation coefficients were 0.9984, 0.9955, and 0.9723, respectively, for predicting WU. Concerning accuracy and reliability, the ANN model outperformed the RSM model, making it suitable for various industrial uses. The results offer helpful information for professionals to consider when developing and implementing PWW fiber biocomposites. 本研究考察了再生高密度聚乙烯(RHDPE)的吸水性能. 用3%碳酸氢钠(NaHCO3)处理由棕榈废料Washingtonia(PWW)纤维制成的生物复合材料24小时. 开发了几种用不同浓度的PWW纤维(5至30 wt.%)增强直至饱和或大约25天的RHDPE材料,以研究生物复合材料中的WU动力学和扩散. 应用人工神经网络(ANN)和响应面方法(RSM)对实验中测量的吸收行为进行了建模,并优化了RHDPE/PWW生物复合材料WU的浸泡时间和PWW纤维含量. WU在第一个测试阶段迅速移动,并在浸泡400小时后完成. 结果表明,观察到的数据与预期数据完全吻合. 研究结果表明,神经网络模型预测WU的训练、测试和验证相关系数分别为0.9984、0.9955和0.9723. 在准确性和可靠性方面,ANN模型优于RSM模型,适用于各种工业应用. 研究结果为专业人员在开发和实施PWW纤维生物复合材料时提供了有用的信息.

What problem does this paper attempt to address?

The paper mainly addresses the following issues: ### Research Background and Objectives - **Background**: With the widespread application of composite materials in various fields, especially those using natural fibers as reinforcement materials, these composites have garnered attention due to their environmental friendliness. However, these materials are typically hydrophilic and tend to absorb moisture, which limits their range of applications. Therefore, understanding and controlling the water absorption phenomenon of plant fiber composites is crucial. - **Objectives**: This study aims to simulate and optimize the water absorption behavior of recycled high-density polyethylene (RHDPE) and treated palm waste Washingtonia filifera (PWW) fiber biocomposites using Artificial Neural Networks (ANN) and Response Surface Methodology (RSM). ### Specific Issues Addressed 1. **Material Selection and Treatment**: Recycled high-density polyethylene (RHDPE) was chosen as the matrix material, and PWW fibers were pretreated (soaked in a 3% sodium bicarbonate solution for 24 hours) to enhance their performance in the composite. 2. **Composite Preparation**: A series of RHDPE/PWW biocomposites were prepared with varying PWW fiber contents (5-30 wt.%) and soaking times. 3. **Water Absorption Performance Evaluation**: The water absorption performance of these biocomposites was evaluated experimentally, and the effects of fiber content and soaking time on water absorption performance were analyzed. 4. **Modeling and Optimization**: - ANN was used to model the experimentally obtained water absorption behavior and to validate the accuracy of the model. - RSM was used to further optimize the PWW fiber content and soaking time to achieve the best water absorption performance. - The performance of ANN and RSM models was compared to determine which method is more suitable for predicting and optimizing the water absorption behavior of biocomposites. ### Main Findings - **Model Performance**: The ANN model demonstrated higher accuracy and reliability in predicting water absorption rates compared to the RSM model. - **Optimization Results**: The optimization of the model provided recommendations for the optimal combination of PWW fiber content and soaking time, which is significant for developing high-performance biocomposites. In summary, this study addresses the issue of effectively controlling and optimizing the water absorption performance of RHDPE/PWW biocomposites through experimental and modeling methods, providing important theoretical basis and technical support for the practical application of such composites.

ANN and RSM Prediction of Water Uptake of Recycled HDPE Biocomposite Reinforced with Treated Palm Waste W. filifera

Role of surface treatment on water absorption of poly(vinyl chloride) composites reinforced by Phyllostachys pubescens particles

Chemical Processing Effect on the Tensile Strength of Waste Palm Fiber-Reinforced HDPE Biocomposite: Optimizing Using Response Surface Methodology

Characteristics of paper mill sludge-wood fiber-high-density polyethylene composites

Advanced Bamboo Industry Wastewater Treatment Through Nanofiltration Membrane Technology

Influence of Giant Reed (Arundo Donax L.) Culms Processing Procedure on Physicochemical, Rheological, and Thermomechanical Properties of Polyethylene Composites

The Reinforcing Effect of Waste Polyester Fiber on Recycled Polyethylene

Valorization of Potential Post-Consumer Polyethylene (PE) Plastics Waste and Ethiopian Indigenous Highland Bamboo (EHB) for Wood Plastic Composite (WPC): Experimental Evaluation and Characterization

Development of Wood Polymer Composites from Recycled Wood and Plastic Waste: Thermal and Mechanical Properties

Effects of Natural Fiber Waste, Content, and Coupling Agent on the Physical and Mechanical Properties of Wood Species–Plastic Composites as Green Materials

Mechanical and morphological characterization of recycled HD-PE bio-composites based on alfa fibers and natural pozzolan

Investigation of Chemical Analysis and Physical Properties of Bio-polymer Waste Banana Peel Fibre Composite

Water absorption of biomass fillers to impact the degradation of poly(butyleneadipate‐co‐terephthalate) composites

High‐quality and efficient recovery of waste agricultural mulch film mixture via solid‐state shear milling technology

Mechanical properties and water absorption behavior of injection-molded wood fiber/carbon fiber high-density polyethylene hybrid composites

Synergistic reinforcing effect of fly ash and powdered wood chips on the properties of polypropylene hybrid composites

Manufacturing of wood plastic composite from polyethylene/poly(ethylene terephthalate) waste/ultra high molecular weight polyethylene blends and rice husk fiber: Raw materials preparation and preliminary processing investigation

Investigation of chemical analysis and physical properties of bio-polymer waste banana peel fibre composites

Mechanical, thermal, and water absorption properties of HDPE/barley straw composites incorporating waste rubber

Microstructure and Performance Study of PETMF/WPU Composites Prepared by Water‐Soluble Method

Effect of Fiber Loading on Thermal Properties of Cellulosic Washingtonia Reinforced HDPE Biocomposites