Abstract:Dual active bridge (DAB) converters are widely used in the on-board propulsion systems of transportation electrification applications. The tendency of decreasing volume consumption leads to the magnetic integration investigation of the planar transformers. For DABs, integration has been focused on integrating the series inductors and a high frequency transformer (HFT) into a single magnetic component by increasing the leakage inductance of the HFT. This brings a critical issue to the designers: whether structural modification is required for the selected core at the transformer design stage to achieve the aimed leakage inductance. Since equivalent series inductance in power characteristic is replaced by leakage inductance, e accurate leakage inductance estimation strategy is also required. This paper firstly proposed a reluctance based leakage inductance evaluation strategy for the accurate estimation with air-path leakage considered. As the common calculations of the winding-arrangement-dominated leakage inductance commonly ignores the air-path leakage fluxes. Based on the estimation of the threshold leakage inductance, an optimized magnetic integration procedure for planar transformer has been developed, which can help judge whether core modification is required and then provide winding arrangement coordination. 3D Finite Element Analysis (FEA) simulation and prototype experiments were conducted to validate the theoretical analyses.

Magnetic Integration and Modeling Analyses of Hybrid Distribution Transformer

Analysis, Design, and Implementation of a Spatially Nested Magnetic Integration Method for Inductive Power Transfer Systems

A Study on the Method of Temperature Distribution Control in Electromagnetism Induction Heating

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

High-Density Planar Integrated Magnetics with Two-Sided Merged Inductor Windings and Integrated Cores for Resonant DC/DC Converter

Control Integrated Studies on High Speed Permanent Magnetic Generators System

Modeling and Design of Integrated Inductor and Transformer Considering Superposed Flux Density in On-Board-Charger

A Novel Modeling Method For Nonlinear Magnetic Devices Reflect Magnetic Circuit And Circuit Characteristics

Modeling of direct AC/AC hybrid distribution transformer based on relaxed two port network theory

Dynamic Modeling of Surface-Mounted Permanent Magnet Motors Considering Saturation

Design and Analysis of a Transverse-flux Permanent Magnet Motor With Hybrid Iron-core

Quasi-Proportional-Resonant Control for the Hybrid Distribution Transformer with LCL-Type Converters

A magnetic integration structure for the buck-cascaded half-bridge DC-DC converter

Advanced Computational-Time Reduction Technology of Nonlinear Fourier-Based and Magnetic Circuit Hybrid Model

Magnetic Integration for a Dual Active Bridge Converter Planar Transformer with Accurate Leakage Inductances Estimation

Quasi-Proportional-Resonant Control Strategy for the Hybrid Distribution Transformer with LCL-Type Converters

Compound Control System of Hybrid Distribution Transformer

Circuit-Field Coupling and Magnetic-Thermal Coupling Analysis of RRF Converter Designed with Magnetic Integration

Electromagnetic Hybrid Model for Three-phase Three-leg Transformer DC Bias Based on Jiles-Atherton Hysteresis Theory

Optimized Design and Electromagnetic-Thermal- Mechanical Analysis of a Toroidal D-Shaped Superconducting Magnet in 5 MW LIQHY-SMES System

Hybrid Modeling Method for Thermal Analysis of Hairpin Winding Permanent Magnet Machine