Abstract:This paper presents a novel radiant heating system with a wall-embedded micro heat pump (WEMHP) for residential buildings. The interior surface temperature of the exterior wall-section empowered by the micro heat pump is independently controlled, enabling distributed thermal comfort delivery. The micro heat pump consists of a miniature compressor along with an aluminum roll-bond condenser and evaporator. In contrast to conventional hydronic radiant systems and heat pumps with separate indoor and outdoor units (i.e., split systems), the WEMHP is a "packaged" system that would not require on-site installation and charging of a secondary water loop and circulation pump or refrigerant piping. This could ultimately lead to reduced installation and maintenance costs. In this study, a detailed system model is presented and integrated with a single-zone building model to assess the energy performance of the WEMHP in heating mode. For a designed living room scenario with an external wall WEMHP-to-wall ratio (HPWR) of 0.6 and window-to-wall ratio (WWR) of 0.2, the simulation results show that up to 23 % energy savings compared with a baseline air-to-air heat pump are possible. The results also indicate the HPWR needs to be higher than 0.4 to achieve performance comparable to the baseline. Additionally, experiments were conducted in a laboratory environment in which surface temperatures were controlled to emulate different scenarios for integration of WEMHP technology and to evaluate thermal comfort conditions. The experimental results show that the median operative temperature differences in the indoor environment were within 0.5 °C for various locations while the largest radiant asymmetry was 2.2 °C for the designed room configuration. Moreover, simulations were conducted to evaluate thermal comfort conditions in applications having a smaller HPWR of 0.4 with various values of WWR. Overall, the combined simulation and experimental study shows that the WEMHP has potential to reduce energy use while maintaining thermal comfort at acceptable levels where the HPWR is higher than 0.4.

Numerical study on heating performance of a wall-mounted air conditioner combined with a radiant panel

Numerical Simulation on the Thermal Performance of a PCM-containing Ventilation System with a Continuous Change in Inlet Air Temperature

Stratum-air-distributed radiant-convective room air conditioner for heating

Thermal Performance of Novel Convective-Adjustable Flat Panel Radiant Unit

Experimental study on the thermal performance of Type-C near dew point radiant cooling wall panel

Experimental Investigation on Heating Performance of a Novel Radiant-Convective Heating Terminal

Thermal Comfort Analysis of Radiant Cooling Panels with Dedicated Fresh-Air System

Numerical Study of the Integrated Heat Transfer of a Condensation-Free Radiant Cooling Panel Covered with Multiple Interlayer Infrared Membranes

Numerical Simulation on Heating Performances of a Radiant-Convective Heating Terminal

Study on Thermal Performance of Panel Radiant Floor Heating System

Numerical simulation of cooling performance of radiant ceiling system interacting with a ceiling fan

Comparison Study on Indoor Temperature Distributions with Radiant Heating and Convection Heating

Research on the thermal comfort of vertical radiant cold plate coupling with a new dual cold source dehumidification air conditioning system

Experimental Investigation on the Heat Transfer Performance and Water Condensation Phenomenon of Radiant Cooling Panels

Wall-embedded micro heat pump for radiant heating in buildings: Evaluation of energy and thermal comfort performance

Analyzing Excess Heat Factors of Convective/radiant Terminals: Balancing Beginning and Steady Stage

Experimental study on wall and ceiling capillary radiant cooling performance

Experimental Evaluation of Indoor Thermal Environment with Modularity Radiant Heating in Low Energy Buildings

Research on Design and Operation Methods of Radiant Panel with Fresh Air System

Numerical Study on the Thermal Performance of Phase Change Materials Wall by Radiative Cooling

Steady-State Thermal Performance of Radiant Wall Embedded with Capillary-Tubes