Abstract:Tool wear and breakage is one of the biggest obstacles for developing the unattended CNC machining. Especially when cutting the difficult-to-machining materials, the tool wear will be more rapid and the tool breakage becomes more frequent, which makes an effective tool wear and breakage monitoring very urgent. In the paper, a physical model-based tool wear and breakage monitoring method is proposed. Firstly, a physical model of milling force with the influence of cutter runout and tool wear is established. The spindle box vibration and cutting torque of spindle drive system induced by milling force have been clarified theoretically. Then, through the measurements of milling force, spindle box vibration and driving current, a tool wear monitoring method by extracting the comprehensive feature from the seven-channel specific cutting force coefficients (SCFCs) has been presented. In the method, a multi-parameter decoupling identification procedure for the cutter runout, tooth wear loss and respective SCFCs has been clarified. The force homogenization effect of multi-tooth with tool wear is found. Moreover, an efficient tool breakage monitoring method is further put forward, which incorporates the amplitude ratios of multi-channel data to form an indicator for judging the occurrence of tool damage. The generation mechanism of the sudden distortion on signal waveform resulting from tool breakage is also explained. Finally, long-time milling experiments with multiple groups of machining parameters have been carried out on the general and heavy-cutting machine tools to verify the validity of the proposed method. The verification results indicate that the tool wear and breakage monitoring method can well estimate the cutting status of cutter. The study can provide a useful research basis for the potential industrial application of tool wear and breakage monitoring technology.

Drill wear monitoring using cutting force signals

Development of a Real-Time Monitoring and Calculation Method for TBM Disc-Cutter's Cutting Force in Complex Ground

Tool Wear Monitoring in Drilling Using Multiple Feature Fusion of the Cutting Force

Cutting Tool Wear Monitoring in CNC Machines Based in Spindle-Motor Stray Flux Signals

On-Line Monitoring Method of Carbon Fiber Composite Drilling Tool Wear Driven by Digital Twin

Tool flank wear prediction using high-frequency machine data from industrial edge device

Tool wear monitoring of micro-milling operations

Real-time tool wear monitoring in milling using a cutting condition independent method

Drilling force prediction and drill wear monitoring for PCB drilling process based on spindle current signal

WEAR MONITORING IN TURNING OPERATIONS USING VIBRATION AND STRAIN MEASUREMENTS

Tool wear monitoring in rock drilling applications using vibration signals

Real-time estimation of machine cutting tool wear

Tool-wear monitoring in machine turning

Real-time drill wear estimation based on spindle motor power

Physical model-based tool wear and breakage monitoring in milling process

Advance monitoring of hole machining operations via intelligent measurement systems: A critical review and future trends

Intelligent monitoring of milling tool wear based on milling force coefficients by prediction of instantaneous milling forces

Real-Time Estimation for Cutting Tool Wear Based on Modal Analysis of Monitored Signals

Milling force coefficients-based tool wear monitoring for variable parameter milling

Tool wear intelligent monitoring techniques in cutting: a review

Identification of Tool Wear During Cast Iron Drilling Using Machine Learning Methods