Abstract:For the efficient and reliable operation of automated machining processes, the implementation of suitable tool condition monitoring (TCM) strategy is required. Various monitoring systems, utilising sophisticated signal processing techniques, have been widely researched for a number of different processes. Most monitoring systems developed up to date employ force, acoustic emission and vibration, or a combination of these and other techniques with a sensor integration strategy. With this work, the implementation of a monitoring system utilising simultaneous vibration and strain measurements on the tool tip, is investigated for the wear of synthetic diamond tools which are specifically used for the manufacturing of aluminium pistons. Contrary to many of the earlier investigations, this work was conducted in a manufacturing environment, with the associated constraints such as the impracticality of direct measurement of the wear. Data from the manufacturing process was recorded with two piezoelectric strain sensors and an accelerometer, each coupled to a DSPT Siglab analyser. A large number of features indicative of tool wear were automatically extracted from different parts of the original signals. These included features from the time and frequency domains, time-series model coefficients (as features) and features extracted from wavelet packet analysis. A correlation coefficient approach was used to automatically select the best features indicative of the progressive wear of the diamond tools. The self-organising map (SOM) was employed to identify the tool state. The SOM is a type of neural network based on unsupervised learning. A near 100% correct classification of the tool wear data was obtained by training the SOM with two independent data sets, and testing it with a third independent data set.

Tool wear monitoring in rock drilling applications using vibration signals

WEAR MONITORING IN TURNING OPERATIONS USING VIBRATION AND STRAIN MEASUREMENTS

Feature Extraction and Analysis Method of Spindle Vibration Signal for Tool Wear Monitoring

Research on Power and Vibration Signal Acquisition Method and System of Machine Tool for Tool Wear Monitoring

Drill wear monitoring using cutting force signals

Tool Wear Monitoring with Vibration Signals Based on Short-Time Fourier Transform and Deep Convolutional Neural Network in Milling

Tool Wear Monitoring in CNC Milling Process Based on Vibration Signals from an On-Rotor Sensing Method

Tool wear monitoring using a novel parallel BiLSTM model with multi-domain features for robotic milling Al7050-T7451 workpiece

Vibration-based tool wear monitoring using artificial neural networks fed by spectral centroid indicator and RMS of CEEMDAN modes

Condition Monitoring of Cutting Tools by Feature Analysis of Vibro-Acoustic Sensing Signals

Tool Wear Monitoring in Drilling Using Multiple Feature Fusion of the Cutting Force

Tool wear monitoring of micro-milling operations

Use of cutting force and vibro-acoustic signals in tool wear monitoring based on multiple regression technique for compreg milling

Computer numerical control machine tool wear monitoring through a data-driven approach

Research on GA-SVM tool wear monitoring method using HHT characteristics of drilling noise signals

Tool condition monitoring in micro milling of brittle materials

Tool wear monitoring for cavity milling based on vibration singularity analysis and stacked LSTM

Tool Wear State Identification Based on the IWOA-VMD Feature Selection Method

Tool wear monitoring with wavelet packet transform—fuzzy clustering method

A New Strategy for Disc Cutter Wear Status Perception Using Vibration Detection and Machine Learning