Abstract:Tool wear and breakage is one of the biggest obstacles for developing the unattended CNC machining. Especially when cutting the difficult-to-machining materials, the tool wear will be more rapid and the tool breakage becomes more frequent, which makes an effective tool wear and breakage monitoring very urgent. In the paper, a physical model-based tool wear and breakage monitoring method is proposed. Firstly, a physical model of milling force with the influence of cutter runout and tool wear is established. The spindle box vibration and cutting torque of spindle drive system induced by milling force have been clarified theoretically. Then, through the measurements of milling force, spindle box vibration and driving current, a tool wear monitoring method by extracting the comprehensive feature from the seven-channel specific cutting force coefficients (SCFCs) has been presented. In the method, a multi-parameter decoupling identification procedure for the cutter runout, tooth wear loss and respective SCFCs has been clarified. The force homogenization effect of multi-tooth with tool wear is found. Moreover, an efficient tool breakage monitoring method is further put forward, which incorporates the amplitude ratios of multi-channel data to form an indicator for judging the occurrence of tool damage. The generation mechanism of the sudden distortion on signal waveform resulting from tool breakage is also explained. Finally, long-time milling experiments with multiple groups of machining parameters have been carried out on the general and heavy-cutting machine tools to verify the validity of the proposed method. The verification results indicate that the tool wear and breakage monitoring method can well estimate the cutting status of cutter. The study can provide a useful research basis for the potential industrial application of tool wear and breakage monitoring technology.

Drilling force prediction and drill wear monitoring for PCB drilling process based on spindle current signal

Clamping force prediction for automatic drilling of stacked thin-walled workpieces based on finite element method

Modeling of Non-Linear Cutting Forces for Dry Orbital Drilling Process Based on Undeformed Chip Geometry

Real-time drill wear estimation based on spindle motor power

Intelligent monitoring of milling tool wear based on milling force coefficients by prediction of instantaneous milling forces

Mechanical model for predicting thrust force with tool wear effects in drilling of unidirectional CFRP

A solution for micro drill condition monitoring with vibration signals for PCB drilling

Drill wear monitoring using cutting force signals

A semi-analytical model for predicting tool wear progression in drilling CFRP

A prediction model of drilling force in CFRP internal chip removal hole drilling based on support vector regression

A Tool Wear Prediction and Monitoring Method Based on Machining Power Signals

Modeling and experimental analysis of ultrasonic vibration drilling force prediction model for tiny small holes in high body fraction aluminum-based silicon carbide composites

Weak Signal Enhancement for Small Drill Condition Monitoring in PCB Drilling Process by Using Adaptive Multistable Stochastic Resonance

Characterization of Printed Circuit Board Micro-Holes Drilling Process by Accurate Analysis of Drilling Force Signal

On-Line Monitoring Method of Carbon Fiber Composite Drilling Tool Wear Driven by Digital Twin

Online monitoring model of micro-milling force incorporating tool wear prediction process

Physical model-based tool wear and breakage monitoring in milling process

Modeling Evolution of Cutting Force in Ultrasonically Assisted Drilling of Carbon Fiber Reinforced Plastics

Drilling force model for forced low frequency vibration assisted drilling of Ti-6Al-4V titanium alloy

Mechanical Drilling Force Model for Longitudinal Ultrasonic Vibration-assisted Drilling of Unidirectional CFRP

Tool wear assessment and life prediction model based on image processing and deep learning