Material removal in laser chemical processing with modulated laser power

Yasmine Bouraoui,Lewin Rathmann,Claudia Niehaves,Merlin Mikulewitsch,Andreas Fischer,Tim Radel
DOI: https://doi.org/10.2351/7.0001109
IF: 2.1
2024-01-02
Journal of Laser Applications
Abstract:Laser chemical machining (LCM) is a method of laser processing based on gentle material removal by means of thermal induced chemical dissolution. Since LCM depends predominantly on the surface temperature of the workpiece, the process window is restricted by the appearance of gas bubbles at higher laser powers and their associated shielding effect. In order to extend the process understanding, the influence of the laser power modulation on the removal behavior is investigated in the present work. The experiments were conducted on titanium grade 1 and with phosphoric acid. Based on the response time in experiments with a single step function of the laser power, a spatial frequency threshold was determined above which a constant removal depth could be expected. Afterward, the laser power was modulated rectangularly in time, resulting in combination with the process velocity in different spatial modulation frequencies varying from 1 to 20 mm−1. The investigations showed that the removal cavity exhibited sinusoidal oscillation in depth along the machining direction with a spatial frequency corresponding to the spatial frequency of the laser power. When the spatial frequency exceeds the determined threshold frequency, the cavity depth is constant. This established the basis for generating complex removal profiles by varying the power in the range below the threshold frequency.
materials science, multidisciplinary,optics,physics, applied
What problem does this paper attempt to address?
The paper primarily explores the impact of modulating laser power on material removal behavior in Laser Chemical Machining (LCM). The main objective of the study is to expand the understanding of the influence of modulated energy input during the laser chemical machining process. Specifically, the paper attempts to address the following issues: 1. **Understanding Response Time**: Investigating the response time of the material to changes in power by adjusting the laser power using a single-step function. This helps determine the time required for the material removal depth to return to a steady state when the power is increased or decreased. 2. **Determining Threshold Frequency**: Based on the response time obtained from the single-step function experiments, determining a spatial frequency threshold above which a constant removal depth can be expected. 3. **Exploring Modulation Effects**: Studying the material removal behavior at different spatial frequencies by modulating the laser power using a rectangular function. Particular attention is given to the sinusoidal fluctuation phenomenon of the removal cavity depth along the machining direction and its relationship with the laser power modulation frequency. 4. **Generating Complex Structures**: Utilizing the ability to modulate laser power to generate complex material removal profiles within the range below the threshold frequency. Through these studies, the paper aims to provide a deeper understanding of laser chemical machining and offer guidance for parameter selection in practical applications, especially in situations requiring precise control of the material removal process.