Abstract:Engineering the electrocatalyst's nanostructure is key-factor in constructing a high-performance electrochemical sensor. The MXene vanadium carbide (V 8 C 7 Tx; VC) nanosheets encapsulating graphitic carbon nanosheets nanocomposite (VC/g-CN NSs NC) as an effective electrocatalyst for detecting clioquinol (CQL) is reported here. The interconnected VC and g-CN nanosheets form a very effective conductive network. The high concentration of O-terminated functional groups in the oxidized VC and the abundant surface area of g-CN contribute to the enhanced electrocatalytic effectiveness of the nanocomposite. The synergistic interaction between the VC NSs and g-CN NSs creates a nanocomposite ideal for CQL detection because it offers many active sites with a fast electron transfer rate. A lower oxidation potential and higher peak current responsiveness distinguish the proposed drug sensor from previously described CQL sensors. Under optimal conditions, the constructed sensors showed strong analytical performance, as shown by a low detection limit of 2.2 nM, high sensitivity of 15.6 μA μM −1 cm −2 , a broad linear range of 0.3–220 μM, and significant recovery outcomes in the analysis of real samples. Thus, the VC/g-CN NSs NC material has promise for use in high-performance electrochemical applications. Graphical Download : Download high-res image (189KB) Download : Download full-size image To ensure food safety and quality, the development of rapid detection of mycotoxins using sensitive and accurate methods is essential. Zearalenone is one of the mycotoxins found in cereals, and its toxicity poses a serious risk to humans. For this concern, a simple ceria silver co doped zinc oxide (Ce-Ag/ZnO) catalyst was prepared by coprecipitation approach. The physical properties of the catalyst were characterized by XRD, FTIR, XPS, FESEM, and TEM. The Ce-Ag/ZnO catalyst was used as an electrode material for the detection of ZEN in food samples due to its synergistic effect and high catalytic activity. The sensor exhibits good catalytic performance with a detection limit of 0.26 μg/mL. Moreover, the efficiency of the prepared sensor was confirmed by selectivity in interference studies and real-time analysis in food samples. Our research is an essential technique for using trimetallic heterostructures to study the construction of sensors. The environmental toxicity of sulfa drugs has attracted significant attention worldwide. Herein, we constructed a carbon-decorated BiPO 4 rod-modified glassy carbon electrode (GCE) for electrochemical detection of sulfamethazine (SMZ). The composite was prepared based on carbon black (CB) and BiPO 4 rods by a simple, greener, nontoxic, and cost-effective ultrasonication method. The physicochemical and electrochemical properties of CB/BiPO 4 composite has characterized using different physicochemical and electrochemical techniques. The developed CB/BiPO 4 composites modified GCE exhibited effective electrochemical active surface area and fast electron transfer rate towards SMZ determination. The developed sensor found wide linear ranges, low limit of detection (LOD), excellent sensitivity, and selectivity. Additionally, the developed sensor successfully analyzed the practical applicability with satisfactory outcomes. Therefore, the present report demonstrates the cheap and cost-effective platform for hazardous SMZ determination. Generally, the nanoparticle along with the nanosheet architecture has excellent physiochemical properties at the interface of electrode and electrolyte. In this work, the SrFe 2 O 4 nanorod was prepared through the simple hydrothermal method, as well as the S-GCN prepared (urea + thiourea) by thermal polymerization, and using the solvent evaporation process SrFe 2 O 4 nanorod was decorated on the S-GCN nanosheet, which is used for the electrochemical detection of flufenamic acid (FFA). The electrocatalytic activity of the bare GCE was enhanced by the SrFe 2 O 4 /S-GCN because SrFe 2 O 4 has more active sides and S-GCN has a large surface area which is confirmed by the EIS and CV analysis. Moreover, the synergistic effect between SrFe 2 O 4 nanorods and the S-GCN nanosheet provides the fast electron transfer property and enhanced electrocatalytic activity towards the FFA. Our proposed sensor exposed the lower level of the detection limit of 0.004 μM and the linear range of 0.01–384 μM with the LOQ of 0.015 μM. Furthermor -Abstract Truncated-

Palladium‑zinc ferrite varnished hydroxyapatite spherocuboids for electrochemical detection of carcinogenic food preservatives

Direct Detection of Pb2+ and Cd2+ in Juice and Beverage Samples Using PDMS Modified Nanochannels Electrochemical Sensors

Cupric oxide nanoparticles incorporated poly(hydroxybutyrate) nanocomposite for potential biosensing application

Development of ternary hybrid composites of transition metal and noble metal-based heterostructures: Ultrasensitive simultaneous electrochemical detection of bisphenol A and bisphenol S in food samples

Integration of iron-manganese layered double hydroxide/tungsten carbide composite: An electrochemical tool for diphenylamine H•+ analysis in environmental samples

Highly Sensitive Electrochemical Determination of Butylated Hydroxyanisole in Food Samples Using Electrochemical-Pretreated Three-Dimensional Graphene Electrode Modified with Silica Nanochannel Film

Fabrication of copper tungstate nanoparticles on screen printed carbon electrode: A disposable strip for the electrochemical detection of the food additive tertiary Butylhydroquinone

A Novel Electrochemical Sensor Based on Nanocomposite Film Electrode for Sensitive Determination of Environmental Hormone Bisphenol A

Rapid detection of tertiary butylated hydroquinone in food samples using Mn-MOF@f-CNF composite-modified screen-printed electrode

Organic-Inorganic Nanohybrid Electrochemical Sensors from Multi-Walled Carbon Nanotubes Decorated with Zinc Oxide Nanoparticles and In-Situ Wrapped with Poly(2-methacryloyloxyethyl ferrocenecarboxylate) for Detection of the Content of Food Additives

Ferroferric Oxide Magnetic Nanoparticles Carbon Nanotubes Nanocomposite-Based Electrochemical Sensor Applied for Detection of Bisphenol A

Development of ZrO(OH)2@HCS co-modified molecularly imprinted gel-based electrochemical sensing platform for sensitive and selective detection of tert-butylhydroquinone in foods

Regulating water decontamination and food safety by a reusable, nanosized MOF@cotton@chitosan composite through nanomolar detection of drug nitroxinil and organoarsenic feed additive p-arsanilic acid

Zirconium‐based metal–organic framework and functionalized carbon black composite for simultaneous electrochemical detection of tert‐butylhydroquinone and butylhydroxyanisole

Reusable MOF-Coated Chitosan@Paper Strip Composite for Real-Time Monitoring of Pesticide Pendimethalin and Organoarsenic Feed Additive Roxarsone Levels in Environmental Water, Food, and Vegetable Samples

Ratiometric Electrochemical Sensor Applying SWCNHs/T-PEDOT Nanocomposites for Efficient Quantification of Tert-Butylhydroquinone in Foodstuffs

From waste to wealth: iron oxide doped hydroxyapatite-based biosensor for the colorimetric detection of ascorbic acid

Electrocatalytic detection of noxious antioxidant diphenylamine in fruit samples with support of Cu@nanoporous carbon modified sensor

Innovative Use of Carbon Nanofibers/Praseodymium Cobaltite for Targeted Detection of Hematologic Sulfamethazine

A fast visual onsite method for detection and quantitation of food additives using an engineered metal nanohybrid-based catalyst

Oxygen-terminated vanadium carbide with graphitic carbon nitride nanosheets modified electrode: A robust electrochemical platform for the sensitive detection of antibiotic drug clioquinol