Ureteral intussusception by a transitional cell carcinoma.

J. Radhi

Abstract:

What problem does this paper attempt to address?

Electrochemical method for detection of aspartame in beverage using Pd modified single walled carbon nanotubes sensor (PdNPs/SWCNTs)

Yi Chen,Dong Wei,Kuo He,Hui Li,Fengmei Sun,

DOI: https://doi.org/10.20964/2021.05.56

IF: 1.541

2021-05-01

International Journal of Electrochemical Science

Abstract:This study revealed synthesis and application of Pd nanoparticles (PdNPs) on single walled carbon nanotubes (SWCNTs) as aspartame sensors in beverage samples through the electrochemical analyses. SWCNTs were synthesized by chemical vapor deposition method and then Pd NPs covered on the carboxylated SWNT walls. SEM and XRD studies were used to characterize the morphology and crystalline structure of prepared films which exhibited Pd NPs that have been randomly decorated on the CNT sheets. Electrochemical characterization of PdNPs/SWCNTs as aspartame sensor was performed through cycle voltammetry (CV) measurements which indicated that the linear sensing range, detection limit and sensitivity were obtained 1 to 120 μM, 0.001 μM and 0.29587μA/μM, respectively. The comparison of prepared electrode performance with other reported aspartame sensing systems showed the lower obtained detection limit value on PdNPs/SWCNTs. Selectivity and interference response of prepared aspartame sensors was studied in presence of different substances in electrochemical cells. The applicability, accuracy and precision of the PdNPs/SWCNTs were also evaluated for aspartame determination in the prepared beverage as a real sample. The results showed the recovery values range was from 86.5% to 93.4% and relative standard deviations values were lower than 4.21% which illustrated acceptable accuracy and precision measurements on the PdNPs/SWCNTs.

electrochemistry
Direct Detection of Pb2+ and Cd2+ in Juice and Beverage Samples Using PDMS Modified Nanochannels Electrochemical Sensors

Gangfeng Li,Tarun Belwal,Zisheng Luo,Yintao Li,Li,Yanqun Xu,Xingyu Lin

DOI: https://doi.org/10.1016/j.foodchem.2021.129632

IF: 8.8

2021-01-01

Food Chemistry

Abstract:Direct electrochemical detection in real food samples remains challenging due to the fouling and interference by abundant interference components. Herein, we report an electrochemical sensing platform based on binary assembly of silica nanochannels and polydimethylsiloxane that is able to detect Pb2+ and Cd2+ in real food samples without complex pretreatments. Using differential pulse anodic stripping voltammetry, the electrochemical detection consists of electro-deposition of metal species and subsequent anodic stripping in the modified silica-nanochannels. Under the optimized conditions, the linear ranges were obtained from 4 to 1500 mu g L-1 for Pb2+ and 30 to 900 mu g L-1 for Cd2+. The relative standard deviations were 2.9% and 3.6% for Pb2+ and Cd2+ of 300 mu g L-1. Without tedious pretreatments, the quantitative detection of Pb2+ and Cd2+ in real juice and beverage samples was successfully performed, revealing that the developed sensor possesses excellent anti-interference and practicability properties for unprocessed food.
Vertically Aligned Manganese-doped ZnO Nanorods Synthesized on Glassy Carbon Electrode for Detection of Colorants in Soft Drinks

Yongjun Wu,Nina Xie,Wei Huang,Jingying Chen,Lu Yu

DOI: https://doi.org/10.20964/2020.09.16

IF: 1.541

2020-01-01

International Journal of Electrochemical Science

Abstract:Synthetic dyes in foods are chemical added to soft drinks and foods during processing or manufacturing. It is very important to monitor artificial colorants in foods due to their potential harm to humans. Herein, sensitive and novel electrochemical sensor based on manganese-doped ZnO (MZO) nanorods was prepared by one step electrochemical method on glassy carbon electrode (GCE) to determine a synthetic food colorant. Differential pulse voltammetry and cyclic voltammetry were applied to study the electrochemical performance of sunset yellow. As-prepared MZO/GCE was directly used as electrochemical sensor for amperometric determination of sunset yellow, which indicated a high sensitivity of 7.75 μA/μM and a low detection limit of 5.2 nM. This proposed technique exhibited good stability, outstanding selectivity, and satisfactory reproducibility and repeatability, and also had been applied to simultaneously detect sunset yellow in soft drinks with suitable results.
A Novel Electrochemical Sensor Based on Pd Confined Mesoporous Carbon Hollow Nanospheres for the Sensitive Detection of Ascorbic Acid, Dopamine, and Uric Acid

Zhang,Li,Liu,Song,Wang,Wang,Li,Liu,Peng

DOI: https://doi.org/10.3390/molecules29112427

IF: 4.6

2024-05-22

Molecules

Abstract:In this study, we designed a novel electrochemical sensor by modifying a glass carbon electrode (GCE) with Pd confined mesoporous carbon hollow nanospheres (Pd/MCHS) for the simultaneous detection of ascorbic acid (AA), dopamine (DA), and uric acid (UA). The structure and morphological characteristics of the Pd/MCHS nanocomposite and the Pd/MCHS/GCE sensor are comprehensively examined using SEM, TEM, XRD and EDX. The electrochemical properties of the prepared sensor are investigated through CV and DPV, which reveal three resolved oxidation peaks for AA, DA, and UA, thereby verifying the simultaneous detection of the three analytes. Benefiting from its tailorable properties, the Pd/MCHS nanocomposite provides a large surface area, rapid electron transfer ability, good catalytic activity, and high conductivity with good electrochemical behavior for the determination of AA, DA, and UA. Under optimized conditions, the Pd/MCHS/GCE sensor exhibited a linear response in the concentration ranges of 300–9000, 2–50, and 20–500 μM for AA, DA, and UA, respectively. The corresponding limit of detection (LOD) values were determined to be 51.03, 0.14, and 4.96 μM, respectively. Moreover, the Pd/MCHS/GCE sensor demonstrated outstanding selectivity, reproducibility, and stability. The recovery percentages of AA, DA, and UA in real samples, including a vitamin C tablet, DA injection, and human urine, range from 99.8–110.9%, 99.04–100.45%, and 98.80–100.49%, respectively. Overall, the proposed sensor can serve as a useful reference for the construction of a high-performance electrochemical sensing platform.

chemistry, multidisciplinary,biochemistry & molecular biology
An electrochemical sensor for simultaneous determination of ascorbic acid, dopamine, uric acid and tryptophan based on MWNTs bridged mesocellular graphene foam nanocomposite.

Huixiang Li,Yi Wang,Daixin Ye,Juan Luo,Biquan Su,Song Zhang,Jilie Kong

DOI: https://doi.org/10.1016/j.talanta.2014.03.034

IF: 6.1

2014-01-01

Talanta

Abstract:A multi-walled carbon nanotubes (MWNTs) bridged mesocellular graphene foam (MGF) nanocomposite (MWNTs/MGF) modified glassy carbon electrode was fabricated and successfully used for simultaneous determination of ascorbic acid (AA), dopamine (DA), uric acid (UA) and tryptophan (TRP). Comparing with pure MGF, MWNTs or MWNTs/GS (graphene sheets), MWNTs/MGF displayed higher catalytic activity and selectivity toward the oxidation of AA, DA, UA and TRP. Under the optimal conditions, MWCNs/MGF/GCE can simultaneously detect AA, DA, UA and TRP with high selectivity and sensitivity. The detection limits were 18.28µmolL−1, 0.06µmolL−1, 0.93µmolL−1 and 0.87µmolL−1, respectively. Moreover, the modified electrode exhibited excellent stability and reproducibility.
C-Reactive Protein in the Arterial Intima: Role of C-Reactive Protein Receptor–Dependent Monocyte Recruitment in Atherogenesis

M. Torzewski,C. Rist,R. Mortensen,T. Zwaka,Magda Bienek,J. Waltenberger,W. Koenig,G. Schmitz,V. Hombach,J. Torzewski

DOI: https://doi.org/10.1161/01.ATV.20.9.2094

2000-09-01

Abstract:Infiltration of monocytes into the arterial wall is an early cellular event in atherogenesis. Recent evidence shows that C-reactive protein (CRP) is deposited in the arterial intima at sites of atherogenesis. In this study, we demonstrate that CRP deposition precedes the appearance of monocytes in early atherosclerotic lesions. CRP is chemotactic for freshly isolated human blood monocytes. A specific CRP receptor is demonstrated on monocytes in vitro as well as in vivo, and blockage of the receptor by use of a monoclonal anti-receptor antibody completely abolishes CRP-induced chemotaxis. CRP may play a major role in the recruitment of monocytes during atherogenesis.
Contactless photoelectrochemical biosensors based on hierarchical MXene/Bi2S3 nanosheets with the branched hybridization chain reaction

Zhenli Qiu,Xintong Lin,Yufen Lei,Jinman Zhu,Rongjian Sa,Yiting Chen

DOI: https://doi.org/10.1016/j.bios.2023.115764

IF: 12.545

2024-01-01

Biosensors and Bioelectronics

Abstract:Ethyl carbamate, a substance frequently occurring in fermented foods, seriously affects people's health; however, poor sensitivity constrains the development of ethyl carbamate sensors. In this work, hierarchical Bi2S3/MXene nanosheets were synthesized using a hydrothermal method, and experimentally their coupled UV light is an efficient NH3 sensing material. Meanwhile, the density functional theory (DFT) confirms that the MXene/Bi2S3 nanosheet interface has an excellent ability to adsorb NH3, resulting in a change of photocurrent. As a proof-of-concept, a highly sensitive ethyl carbamate photoelectrochemical (PEC) biosensor was constructed based on the ammonia generation strategy of glutamate dehydrogenase coupled to the branched hybridization chain reaction (bHCR). Specifically, the target-triggered bHCR enriches a large number of enzyme-encapsulated liposomes, while the enzymatic NH3-generation reaction will cause a change in the Bi2S3/MXene photocurrent, which completes the target detection process. Under optimal conditions, the constructed PEC biosensors exhibited superior analytical performance toward ethyl carbamate in the range of 0.01 μg/mL to 1 μg/mL and limit of detection (LOD) down to 0.001 μg/mL. In addition, it offers an effective method for food safety monitoring due to its excellent stability, fast response, and maneuverability on real samples (red wine, yellow wine, and brandy).

biotechnology & applied microbiology,biophysics,chemistry, analytical,electrochemistry,nanoscience & nanotechnology
A Novel Nanocomposite of Zn(II)-Protoporphyrin-Chitosan-Multi Walled Carbon Nanotubes and the Application to Caffeic Acid Sensing

Bingkai Han,Xin Wen,Jinneng Wang,Yingrui Sun

DOI: https://doi.org/10.3390/nano12193412

IF: 5.3

2022-09-29

Nanomaterials

Abstract:Caffeic acid is an antioxidant that has been widely been related to the health benefits of people in recent years. In this paper, the amino side chains of chitosan (CS) were modified with protoporphyrin IX by amide cross-linking, and then Zn ions were chelated. The properties of metalloporphyrin-preparing functionalized multi-walled carbon nanotubes (MWCNTs) and Zn ions chelated by protoporphyrin IX composites were used as sensitive-selective electrochemical biosensors for the determination of caffeic acid. The morphology and structure of nanocomposite Zn–PPIX–CS–MWCNTs were observed by X-ray spectroscopy mapping (EDX mapping), transmission electron microscopy (TEM), and Fourier-transform infrared spectroscopy (FTIR). The electrochemical behaviors of Zn–PPIX–CS–MWCNT-modified glassy carbon (GC) electrodes were evaluated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The results show that the modified electrode had good electrocatalytic activity towards caffeic acid with a wide linear range of 0.0008–1.6 mM, an excellent sensitivity of 886.90 μAmM−1cm−1, and a detection limit of 0.022 μM. In addition, the caffeic acid sensor had excellent reproducibility, stability, and selectivity to various interfering substances. Therefore, the modified electrode prepared by this experiment can also be applied to electrochemical sensors of other substances.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Facile and controllable hybrid-nanoengineering of MWCNTs/Au@ZIF-8 and AuPt@CeO 2 based sandwich electrochemical aptasensor for AFB 1 determination in foods and herbs

Liang Guo,Shijin Zhou,Yanju Liu,Huaixia Yang,Mingsan Miao,Wei Gao

DOI: https://doi.org/10.1016/j.jscs.2024.101946

IF: 4.712

2024-09-27

Journal of Saudi Chemical Society

Abstract:Herein, a sandwich electrochemical sensing strategy for aflatoxin b 1 (AFB 1 ) detection based on hybrid-nanoengineering was presented. First, Au nanoparticle was doped into zeolitic imidazolate framework-8 (ZIF-8) to form Au@ZIF-8 by in-situ growth method, followed by multi-walled carbon nanotubes (MWCNTs) addition to synthesize MWCNTs/Au@ZIF-8 via self-assembly. The structural "confinement effect" of ZIF-8 afforded a microenvironment for Au nanoparticles and SMCNTs in a certain spatial region, giving MWCNTs/Au@ZIF-8 excellent electrochemical property as the substrate material. In addition, Au-Pt bimetallic nanoparticle, which exhibited excellent stability and catalytic activity was loaded on the hollow cerium oxide (CeO 2 ) to form AuPt@CeO 2 nanoparticle through one-step aqueous phase reduction. Owning to its high surface-to-volume ratio, satisfied electron transfer efficiency and biocompatibility, massive toluidine blue (TB) and AFB 1 antibody (Ab) could be modified on the AuPt@CeO 2 to form AuPt@CeO 2 -Ab-TB, which acted as signal tag for the ultrasensitive assay of AFB 1 . The proposed electrochemical sensing system exhibited wide detection range (2 × 10 -5 − 20 ng/mL) and low detection limit (2.13 fg/mL), which has been successfully applied to AFB 1 determination in four real samples. The hybrid nanoengineering presented in this work is an active attempt to prepare high-performance substrate material and signal tag, which provides a new insight for the development of highly sensitive and specific electrochemical sensing systems.

chemistry, multidisciplinary
Amplified electrochemical determination of niclosamide in food based on carbon nanohorn@MWCNT composite

Min Shi,Shuya Xue,Jingkun Xu,Shuxian Chen,Jin Zou,Yansha Gao,Shuwu Liu,Xuemin Duan,Limin Lu

DOI: https://doi.org/10.1007/s00216-022-04060-0

2022-01-01

Analytical and Bioanalytical Chemistry

Abstract:In this work, carbon nanohorn (CNH)–decorated multi-walled carbon nanotube (MWCNT) (CNH@MWCNT) composite was prepared and used to modify glass carbon electrode (GCE) as sensitive electrochemical sensor for niclosamide (NA) determination. Herein, the decoration of CNHs induces higher dispersibility for MWCNTs, and endows the composite with better conductivity, larger surface area, and higher catalytic activity, which leads to significantly enhanced electrochemical behavior toward NA oxidation. The parameters such as mass ratios of CNHs and MWCHTs, the amount of composite materials, the accumulation time, and the solution pH are systematically optimized. Under optimized conditions, the developed electrochemical sensor exhibits a low detection limit of 2.0 nM with a wide linear range of 7.0 nM–10.0 µM and high anti-interference ability. In addition, the sensor displays good stability, repeatability, and reproducibility. The feasibility of the assay was verified by testing NA in brown rice and rice field water samples.
Colorimetric and ECL dual-mode aptasensor for smartphone-based onsite sensitive detection of aflatoxin B1 in combination with ZnO@MWCNTs/g-C3N4 nanosheets and CuO@CuPt nanocomposites

Hui Xu,Chenru Li,Renjie Mao,Xue Wang,Yufei Fan,Haijie Lu,Jing Liu,Hong Zhou

DOI: https://doi.org/10.1016/j.bios.2024.116569

2024-10-15

Abstract:The development of dual-mode strategies with superior sensitivity and accuracy have garnered increasing attention for researchers in Aflatoxin B1 (AFB1) analysis. Herein, a colorimetric-electrochemiluminescence (ECL) dual-mode biosensor was constructed for onsite and ultrasensitive determination of AFB1. The multi-wall carbon nanotubes (MWCNTs) were integrated with the ZnO metal organic frameworks (MOFs) to accelerate the electron transfer and boost the ECL intensity of g-C3N4 nanoemitters. Through the aptamer-based DNA sandwich assay, the CuO@CuPt nanocomposites were introduced onto the electrode and acted as the dual functional signal nanoprobes. Due to the good spectrum overlap between the CuO@CuPt nanoprobes and g-C3N4 nanosheets, ECL signal could be efficiently quenched. Additionally, the CuO@CuPt nanoprobes show superior catalytic properties towards the TMB and H2O2 colorimetric reactions, and an obvious color alteration from colorless to blue can be observed using the smartphone. Under optimized conditions, a sensitive and accurate dual-mode analysis of the AFB1 was accomplished with the colorimetric detection limit of 3.26 fg/mL and ECL detection limit of 0.971 fg/mL (S/N = 3). This study combines innovative nanomaterial properties of ZnO@MWCNTs, g-C3N4 and CuO@CuPt for ultrasensitive dual-mode detection, which offers new opportunities for the innovative engineering of the dual-mode sensors and demonstrates significant potential in food safety analysis.
Electrochemical Sensors Based on Self-Assembling Peptide/Carbon Nanotube Nanocomposites for Sensitive Detection of Bisphenol A

Yuhang Zhang,Tingting Shao,Hangyu Zhang

DOI: https://doi.org/10.3390/s24051465

IF: 3.9

2024-02-24

Sensors

Abstract:In this study, a cationic amphiphilic self-assembling peptide (SAP) Z23 was designed, and a simple bisphenol a (BPA) sensor, based on SAP Z23/multiwalled carbon nanotubes (Z23/MWCNTs) composite, was successfully fabricated on the surface of a glassy carbon electrode (GCE). The composite material was formed by π-π stacking interaction between the aromatic group on the hydrophobic side of Z23 and the side-wall of MWCNTs, with the charged hydrophilic group of Z23 exposed. During the electrocatalytic process of BPA, a synergistic effect was observed between Z23 and MWCNTs. The current response of the sensor based on composite material was 3.24 times that of the MWCNTs-modified electrode, which was much higher than that of the peptide-based electrode. Differential pulse voltammetry (DPV) was used to optimize the experimental conditions affecting the analytical performance of the modified electrode. Under optimal conditions, the linear range of the sensor was from 10 nM to 100 μM by amperometric measurement with sensitivity and limit of detection (LOD) at 6.569 μAμM−1cm−2 and 1.28 nM (S/N = 3), respectively. Consequently, the sensor has excellent electrochemical performance and is easy to fabricate, making it a good prospect in the field of electrochemical detection in the future.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Polydopamine Bridged MXene and NH2-MWCNTs Nanohybrid for High-Performance Electrochemical Sensing of Acetaminophen

Shuxian Chen,Jingkun Xu,Min Shi,Yongfang Yu,Quan Xu,Xuemin Duan,Yansha Gao,Limin Lu

DOI: https://doi.org/10.1016/j.apsusc.2021.151149

IF: 6.7

2021-01-01

Applied Surface Science

Abstract:MXene/MWCNTs nanohybrid has been deemed as ideal electrode material owing to its unique structure, and physical and chemical properties. However, the bonding between MXene and MWCNTs reported in most literatures mainly depends on the 7t-7t, hydrogen bonds, and electrostatic interaction, which limit the mechanical stability of the materials. To address this issue, herein, a facile approach was developed to in situ cross-link amino functionalized multi-carbon nanotubes on polydopamine functionalized MXene (MXene@PDA/NH2MWCNTs). The NH2-MWCNTs can be well and firmly distributed on the MXene@PDA via Michael addition reaction. The resultant MXene@PDA/NH2-MWCNTs composite displays hierarchical structure, large specific surface area, good conductivity and electrocatalytic ability. Attributing to these characters, the composite modified electrode presents prominent sensing performance toward the determination of acetaminophen (AAP) with good linear response from 5.0 nM to 10.0 mu M and 10.0 mu M to 60.0 mu M, along with a low detection limit of 1.0 nM (S/N = 3). Furthermore, the MXene@PDA/NH2-MWCNTs electrode shows acceptable reproducibility, good selectivity and excellent stability. This method is also employed to detect AAP in the actual samples with approving results.
Self-Reduction of Bimetallic Nanoparticles on Flexible Mxene-Graphene Electrodes for Simultaneous Detection of Ascorbic Acid, Dopamine, and Uric Acid

Ying Wang,Peng Zhao,Bo Gao,Min Yuan,Jiabing Yu,Zeping Wang,Xianping Chen

DOI: https://doi.org/10.2139/ssrn.4163714

2022-01-01

SSRN Electronic Journal

Abstract:Three-dimensional (3D) porous laser-scribed graphene (LSG) is potential electrode material for flexible electrochemical sensor own to its high-efficiency preparation and low cost. However, the growth of nanoparticles usually depends on reducers or harsh conditions, which limit the application in flexible biosensor. To solve this drawback, we applied 2D MXene nanosheets to functionalize 3D LSG sheets with a C-O-Ti covalent crosslink and obtain an LSG-MXene hybrid scaffold. We synthesized the shape-controlled Au-Pd bimetallic nanoparticles on the surface of LSG-MXene by a self-reduction process at room temperature in 6 minutes to enhance its catalytic performance. As a proof of concept, the obtained hybrid nanocomposite can assess Ascorbic Acid (AA,10-1600 μM), Dopamine (DA,12-240 μM), and Uric Acid (UA, 8-800 μM). The fabricated sensor exhibited a low detection limit (S/N = 3) of 3 μM AA, 0.13 μM DA, and 1.47 μM UA. Furthermore, the Au-Pd/MXene/LSG was successfully applied to determine AA, DA, and UA in urine samples with satisfactory. Predictable, these outstanding performance sensors have great potential in terms of flexible and wearable electronics.

English Else
A novel electrochemical sensor based on DUT-67/ZnCo 2 O 4 -MWCNTs modified glassy carbon electrode for the simultaneous sensitive detection of dopamine and uric acid

Xiaoqin Wei,Hao Guo,Zongyan Lu,Lei Sun,Zhilan Pan,Bingqing Liu,Liping Peng,Wu Yang

DOI: https://doi.org/10.1016/j.colsurfa.2023.131921

2023-06-24

Abstract:Uric acid and dopamine are closely related to the health of the organism, so it is important to determine them simultaneously and efficiently. In this paper, the metal-organic framework DUT-67 was in situ grown on the surface of bimetallic oxide ZnCo 2 O 4 nanoflowers , and then ultrasonically compounded with multi-walled carbon nanotubes (MWCNTs) to prepare DUT-67/ZnCo 2 O 4 -MWCNTs composite. The prepared composite was characterized by XRD, SEM, XPS, FTIR, BET and other techniques. Finally, an electrochemical sensor based on DUT-67/ZnCo 2 O 4 -MWCNTs composite modified glassy carbon electrode for simultaneous detection of dopamine (DA) and uric acid (UA) was fabricated. The introduction of ZnCo 2 O 4 into the composite efficiently overcame the disadvantage of the easy aggregation of DUT-67 and produced a synergistic effect with MWCNTs. The electron transfer rate between the electrode and the electrolyte solution was accelerated, and the detection signals of the target molecules were amplified. After characterizing the electrochemical properties of the composite electrode, it was found that the constructed electrochemical sensor showed low detection limits for DA and UA, which were 12 nM and 8.7 nM, respectively, and the wide linear range of 1.0–180.0 μM. Besides, the sensor had excellent reproducibility, repeatability, anti-interference and stability. The proposed sensor was also successfully used to determine the contents of DA and UA in dopamine injection and urine samples with relatively satisfactory recovery rates. This work not only provides a new strategy for the preparation of MOF modified electrodes, but also has a potential application prospect in bioassays.

chemistry, physical
Electrochemical Sensors Based on Single-Wall Carbon Nanotubes in Voltammetric Ascorbic Acid Tests

Natalia Ivanova,Elizaveta Martynova,Anna Vershinina,Maksim Lomakin,Galina Eremeeva,Olesya Gordaya,Sergey Shandakov

DOI: https://doi.org/10.21603/2074-9414-2023-4-2482

2023-12-30

Abstract:Modern highly sensitive and selective sensors are able to determine biologically active substances, which makes this direction one of the most popular areas of analytical chemistry. The study featured the electrochemical properties of new fiber materials based on single-wall carbon nanotubes with prospects of using them in the voltammetry of ascorbic acid. The authors developed a new technology to synthesize films from disordered single-wall carbon nanotubes by chemical vapor deposition. Fibers were produced from a solvent by wet-pulling of single-wall carbon nanotubes networks. Thin films of randomly oriented single-wall carbon nanotube bundles were deposited downstream of a floating aerosol CVD reactor, which included a high temperature furnace with a quartz tube. The synthesis of the single-wall carbon nanotube samples was performed at 825°C. Ethanol served as carbon source while ferrocene was used as catalyst precursor. The single-wall carbon nanotubes were collected on a nitrocellulose filter in the form of films with transmittances of 10% in the middle of the visible wavelength (550 nm). The method was optimized to involve air annealing at 300–320°C and a treatment with strong inorganic acids, i.e., HCl, HNO3 + H2SO4. The voltammetric curves recording included background electrolyte, scan rate, and preconditioning. These parameters were selected experimentally to obtain the maximal sensor response to ascorbic acid content. The anodic peak of ascorbic acid in the phosphate buffer electrolyte (pH 6.86) was observed at a potential of +0.2 V. The current and peak area of ascorbic acid oxidation depended neither on the time nor on the conditioning potential of the sensor. The linear dependences of these parameters on the concentration of ascorbic acid stayed within 50–500 μmol/L (8.8–90 mg/L) at a scan rate of 0.1 mV/s. The single-wall carbon nanotube microsensor had a length of 0.5 cm and an average width of 400 μm. Its sensitivity was two times as high as that of a disk glassy carbon electrode with a diameter of 5 mm. The experimental sensors proved effective in determining ascorbic acid in food products, pharmaceuticals, and biological fluids.
MOF-derived high-density carbon nanotubes "tentacle" with boosting electrocatalytic activity for detecting ascorbic acid

Yan Zhang,Minghui Han,Danni Peng,Haowen Qin,Hehaoming Zheng,Jian Xiao,Nan Yang

DOI: https://doi.org/10.1016/j.talanta.2024.126578

IF: 6.1

2024-11-01

Talanta

Abstract:Accurate detection of ascorbic acid (AA) plays a significant role in food and human physiological processes. Herein, a three-dimensional flexible leaf-like nitrogen-doped hierarchical carbon nanoarrays with high-density carbon nanotube "tentacle" architecture (NC/CNT-Co), which possesses high specific surface area, plenty of active defect sites, and various pore size distributions, was synthesized by the pyrolysis of zeolitic imidazolate framework (ZIF(Co)), while g-C3N4 acted as carbon source and heteroatom doping agent. Benefiting from its unique structure and surface properties, a selective and highly sensitive AA sensor was developed using this material. Compared to powder materials, NC/CNT-Co modified CF (CF@NC/CNT-Co) which don't be extra decorated, exhibits lower detection limit (1 μM), a wider linear range (20-1400 μM), and better stability, showing higher performance in electrocatalysis and detection of AA. Furthermore, CF@NC/CNT-Co also demonstrates high resistance to interference and fouling in AA detection. Particularly, the prepared CF@NC/CNT-Co electrode could determine AA in beverage samples with a recovery rate of 96.3-103.5 %. Therefore, the three-dimensional NC/CNT-Co hierarchical structure can be provided as an original electrode nanomaterial suitable for the selective and sensitive detection of AA, with a wide range of practical applications from food analysis to the pharmaceutical industry.
A Novel Amperometric Biosensor Based on Single Walled Carbon Nanotubes with Acetylcholine Esterase for the Detection of Carbaryl Pesticide in Water

Shaik Firdoz,Fang Ma,Xiuli Yue,Zhifei Dai,Anil Kumar,Bin Jiang

DOI: https://doi.org/10.1016/j.talanta.2010.09.028

IF: 6.1

2010-01-01

Talanta

Abstract:Amperometric biosensor is fabricated for the detection of carbaryl based on single walled carbon nanotubes (SWCNTs) and acetylcholine esterase (AchE). The dispersion of SWCNTs in positively charged polyelectrolyte, poly(diallyldimethylammonium chloride) (PDDA), possibly takes place due to weak supramolecular interaction between them, which then binds electrostatically to the negatively charged AchE at pH 7.4 using layer-by-layer (LbL) self-assembly technique. The optical intensity of UV/vis spectra increased with the number of layers, indicating the build up of a multilayer coating on the electrode. The activity of acetylcholine esterase on modified electrode of 3mm in diameter was found to be 0.2U. The biosensor showed good sensitivity and stability towards the monitoring of carbaryl pesticides in water with the detection limit of 10(-12)gL(-1) and recovery of 99.8 ± 2.7% to 10(-10)gL(-1). This protocol can be used for the immobilization of other enzymes to fabricate a range of biosensors.
Poly(pyrocatechol-3,5-disodiumsulfonate)/Multi-Walled Carbon Nanotubes Composite for Simultaneous Determination of Dopamine, Ascorbic Acid and Uric Acid

Ying Xue,Hong Zhao,Zhijiao Wu,Xiangjun Li,Yujian He,Zhuobin Yuan

DOI: https://doi.org/10.1166/jnn.2013.6024

2013-01-01

Journal of Nanoscience and Nanotechnology

Abstract:A novel poly(pyrocatechol-3,5-disodiumsulfonate)/multi-walled carbon nanotubes (PPD/MWCNT) composite film modified glassy carbon electrode (GCE) was fabricated and successfully used to simultaneously determine ascorbic acid (AA), dopamine (DA) and uric acid (UA). Owing to the synergistic effects of PPD and MWCNTs, the electrochemical responses of AA, DA and UA at PPD/MWCNTs/GCE were clearly superior to those at bare GCE. Additionally, the PPD/MWCNTs composite film could reduce the potential overlap of AA, DA and UA so as to favor simultaneous determination of the three substances. Under the optimum conditions, the linear calibration curves of AA, DA and UA were obtained by differential pulse voltammetry in the range of 10-1000, 1-100 and 4-1200 microM, and the detection limits were 5, 0.5 and 0.5 microM (S/N = 3) respectively. The results showed PPD/MWCNTs/GCE possessed good reproducibility and stability, and it could be applied to determine UA in human urine with satisfying recovery by standard addition method.
Efficient Electrochemical Sensing of Chlorpromazine with a Composite of Multiwalled Carbon Nanotubes and a Thiacalix[4]arene-Based Metal-Organic Framework

Le Ma,Wen-Yuan Pei,Jin Yang,Jian-Fang Ma

DOI: https://doi.org/10.1021/acs.langmuir.4c02003

IF: 3.9

2024-08-20

Langmuir

Abstract:Chlorpromazine (CPMZ) is a representative drug for the treatment of psychiatric disorders. Excessive use of CPMZ could result in some serious health problems, and therefore, construction of a sensitive electrochemical sensor for CPMZ detection is greatly significant for human health. Herein, a feasible electrochemical method for the detection of CPMZ was provided. To design a suitable electrode surface modifier, a new two-dimensional (2D) thiacalix[4]arene-based metal-organic framework was designed and synthesized under solvothermal conditions, namely, [Co(TMPA)Cl2]MeOH·2EtOH·2H2O (Co-TMPA). Afterward, a series of composite materials was prepared by combining Co-TMPA with highly conductive carbon materials. Markedly, Co-TMPA/MWCNT-2@GCE (GCE = glassy carbon electrode, MWCNT = multiwalled carbon nanotube) exhibited the best electrocatalytic performance for CPMZ detection due to the synergistic effect between MWCNT and Co-TMPA. Particularly, it featured a low limit of detection (8 nM) and a wide linear range (0.05 to 1350 μM) in quantitative determination of CPMZ. Meanwhile, the sensor possessed excellent stability, selectivity, and reproducibility. Importantly, Co-TMPA/MWCNT-2@GCE was employed to analyze CPMZ in urine and serum with satisfactory recoveries (98.87-102.17%) and relative standard deviations (1.44-3.80%). Furthermore, the electrochemical detection accuracy of the Co-TMPA/MWCNT-2@GCE sensor was verified with the ultraviolet-visible spectroscopy technique. This work offers a promising sensor for the efficient analysis of drug molecules.

Ureteral intussusception by a transitional cell carcinoma.

Electrochemical method for detection of aspartame in beverage using Pd modified single walled carbon nanotubes sensor (PdNPs/SWCNTs)

Direct Detection of Pb2+ and Cd2+ in Juice and Beverage Samples Using PDMS Modified Nanochannels Electrochemical Sensors

Vertically Aligned Manganese-doped ZnO Nanorods Synthesized on Glassy Carbon Electrode for Detection of Colorants in Soft Drinks

A Novel Electrochemical Sensor Based on Pd Confined Mesoporous Carbon Hollow Nanospheres for the Sensitive Detection of Ascorbic Acid, Dopamine, and Uric Acid

An electrochemical sensor for simultaneous determination of ascorbic acid, dopamine, uric acid and tryptophan based on MWNTs bridged mesocellular graphene foam nanocomposite.

C-Reactive Protein in the Arterial Intima: Role of C-Reactive Protein Receptor–Dependent Monocyte Recruitment in Atherogenesis

Contactless photoelectrochemical biosensors based on hierarchical MXene/Bi2S3 nanosheets with the branched hybridization chain reaction

A Novel Nanocomposite of Zn(II)-Protoporphyrin-Chitosan-Multi Walled Carbon Nanotubes and the Application to Caffeic Acid Sensing

Facile and controllable hybrid-nanoengineering of MWCNTs/Au@ZIF-8 and AuPt@CeO 2 based sandwich electrochemical aptasensor for AFB 1 determination in foods and herbs

Amplified electrochemical determination of niclosamide in food based on carbon nanohorn@MWCNT composite

Colorimetric and ECL dual-mode aptasensor for smartphone-based onsite sensitive detection of aflatoxin B1 in combination with ZnO@MWCNTs/g-C3N4 nanosheets and CuO@CuPt nanocomposites

Electrochemical Sensors Based on Self-Assembling Peptide/Carbon Nanotube Nanocomposites for Sensitive Detection of Bisphenol A

Polydopamine Bridged MXene and NH2-MWCNTs Nanohybrid for High-Performance Electrochemical Sensing of Acetaminophen

Self-Reduction of Bimetallic Nanoparticles on Flexible Mxene-Graphene Electrodes for Simultaneous Detection of Ascorbic Acid, Dopamine, and Uric Acid

A novel electrochemical sensor based on DUT-67/ZnCo 2 O 4 -MWCNTs modified glassy carbon electrode for the simultaneous sensitive detection of dopamine and uric acid

Electrochemical Sensors Based on Single-Wall Carbon Nanotubes in Voltammetric Ascorbic Acid Tests

MOF-derived high-density carbon nanotubes "tentacle" with boosting electrocatalytic activity for detecting ascorbic acid

A Novel Amperometric Biosensor Based on Single Walled Carbon Nanotubes with Acetylcholine Esterase for the Detection of Carbaryl Pesticide in Water

Poly(pyrocatechol-3,5-disodiumsulfonate)/Multi-Walled Carbon Nanotubes Composite for Simultaneous Determination of Dopamine, Ascorbic Acid and Uric Acid

Efficient Electrochemical Sensing of Chlorpromazine with a Composite of Multiwalled Carbon Nanotubes and a Thiacalix[4]arene-Based Metal-Organic Framework