Abstract:WO 3 photoanodes are widely used in photoelectrochemical catalysis, but typically the as-synthesized material is annealed before application. It is therefore desirable to explore less energy-intensive treatments. In this study, WO 3 films of up to 3.9 μm thickness were obtained by galvanostatic anodization of tungsten foil in a neutral-pH Na 2 SO 4 and NaF electrolyte, also containing a NaH 2 PO 2 additive (to suppress O 2 accumulation on the pore walls). Additionally, the WO 3 photoanodes were modified by applying a cathodic reduction (H + intercalation) and anodic activation treatment in-situ. XPS spectra revealed that intercalation modifies WO 3 films; the amount of W 5+ -O and O-vacancy bonds was increased. Furthermore, subsequent activation leads to a decrease of the W 5+ signal, but the amount of O-vacancy bonds remains elevated. The as-prepared and reduced (intercalated & activated) films were tested as OER photoanodes in acidic 0.1 M Na 2 SO 4 media, under illumination with a 365 nm wavelength LED. It was observed that thinner films generated larger photocurrents. The peculiarities detected by XPS for reduced films correlate well with their improved photocatalytic activity. Photo-electrochemical impedance and intensity modulated photocurrent spectroscopies were combined with steady-state measurements in order to elucidate the effects of H + intercalation on photoelectrochemical performance. The reduction results in films with enhanced photoexcited charge carrier generation/separation, improved conductivity, and possibly even suppressed bulk recombination. Thus, the intercalation & activation adopted in this study can be reliably used to improve the overall activity of as-synthesized WO 3 photoanodes, and particularly of those that are initially poorly photoactive.

Optimizations of Liquid Phase Deposition Processes for Enhanced Photoelectrocatalytic Activities of Tungsten Oxide Thin Films

Facile preparation of platelike tungsten oxide thin film electrodes with high photoelectrode activity.

Tungsten oxide nanostructures and nanocomposites for photoelectrochemical water splitting

Nanoporous WO3 Films Synthesized by Tuning Anodization Conditions for Photoelectrochemical Water Oxidation

Preparation of Vertically Aligned WO3 Nanoplate Array Films Based on Peroxotungstate Reduction Reaction and Their Excellent Photoelectrocatalytic Performance

Integrating transition metal phosphide catalysts on WO3 photoanodes enabling robust photoelectrocatalytic water oxidation

Improved Photocatalytic Water Splitting Activity of Highly Porous WO3 Photoanodes by Electrochemical H+ Intercalation

One-Step Rapid and Scalable Flame Synthesis of Efficient WO3 Photoanodes for Water Splitting.

Nickel-doped and surface fluorinated tungsten trioxide photoanode with enhanced photoelectrochemical water oxidation

Metal Doping of BiVO 4 by Composite Electrodeposition with Improved Photoelectrochemical Water Oxidation

Ultrathin and Conformal TiO X Overlayers on WO3 Photoelectrodes for Simultaneous Surface Trap Passivation and Heterojunction Formation

Facile Synthesis of a Micro–Nano-Structured FeOOH/BiVO4/WO3 Photoanode with Enhanced Photoelectrochemical Performance

Hydrothermal synthesis of tungsten oxide photo/electrocatalysts: precursor-driven morphological tailoring and electrochemical performance for hydrogen evolution and oxygen reduction reaction application

New aspects of improving the performance of WO3 thin films for photoelectrochemical water splitting by tuning the ultrathin depletion region

Characterization of Ultrasonic Spray Pyrolysis Deposited WO3 Thin Film for Photoelectrochemical Splitting of Water

Efficient Photoelectrochemical Water Oxidation by Metal-Doped Bismuth Vanadate Photoanode with Iron Oxyhydroxide Electrocatalyst

Photoelectrochemical H2 evolution on WO3/BiVO4 enabled by single-crystalline TiO2 overlayer modulations

A facile two-step method for fabrication of plate-like WO3 photoanode under mild conditions.

Facile Fabrication of Sandwich Structured WO3 Nanoplate Arrays for Efficient Photoelectrochemical Water Splitting.

Anodizing Tungsten Foil with Ionic Liquids for Enhanced Photoelectrochemical Applications

Preparation and characterization of a novel WO_3/W photoanode