Abstract:Supply of laminated composites speciments and their mechanical properties. Nanofillers incorporated into polymeric matrices have gained attention for enhancing the properties of materials, particularly nanocomposites, with improvements observed in mechanical and dynamic mechanical thermal properties. Among the nanofillers, calcium carbonate (NCC), montmorillonite‐type clays (MMT), and graphene nanoplatelets (GNP) are prominent. The novelty of this study lies in investigating the dynamic compression behavior using the split‐Hopkinson pressure bar (SHPB) method on laminated composites prepared with reinforced High‐density polyethylene (HDPE) films, including the hybrid effect of calcium carbonate with montmorillonite and calcium carbonate with graphene. The objective of this research is to evaluate the influence of incorporating 1% by mass of nanofillers in laminated composites made with aramid fabric interspersed with nanoreinforced HDPE films. The laminated composites were assessed through bending tests, SHPB, and dynamic mechanical thermal analysis (DMTA). In addition to the samples containing NCC, MMT, and GNP, hybrid samples were prepared by intercalating films containing each nanofiller. The mechanical properties increased by 44%, 48%, and 55% in flexural strength and 46%, 69%, and 88% in flexural modulus for the composites prepared with calcium carbonate, graphene, and the hybrid graphene/calcium carbonate films, concerning the composite containing HDPE film. Moreover, the samples containing HDPE film with 1% GNP demonstrated a 79% increase in toughness, while the hybrid sample, which contained interspersed films of HDPE with 1% GNP and 1% NCC, exhibited a 46% increase in toughness. These results indicate a superior toughness response under high strain rates, contributing to enhanced energy dissipation. These two samples exhibited highly potential for ballistic industrial applications. Highlights Laminated composites reinforced with NCC, MMT, and GNP nanofillers. Mechanical properties of laminated composites assessed using the Split‐Hopkinson pressure bar test and dynamic mechanical thermal analysis. Impact strength improvement through the incorporation of nanofiller into laminated composites. Enhanced energy dissipation in laminated composite materials.

Superior mechanical and ballistic performance of carbon nanotube‐reinforced phenolic/aramid fabric composites via a two‐roll pressing process

Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/phenolic Composites

Compressive and Interlaminar Shear Properties of Carbon/carbon Composite Laminates Reinforced with Carbon Nanotube-Grafted Carbon Fibers Produced by Injection Chemical Vapor Deposition

Study on Mechanical Properties of Carbon Nanotube Reinforced Composites

An experimental investigation of the effect of carbon nanotubes addition and shot peening process on the ballistic limit of fiber-metal laminates

Mechanical properties of carbon nanotube/carbon fiber reinforced thermoplastic polymer composite

The enhanced interlaminar toughness of carbon fiber reinforced poly(ether ether ketone) composites modified by carbon nanotubes

Interlaminar properties of carbon nanotubes modified carbon fibre fabric reinforced polyimide composites

Effect Of Functionalization And Adding Method Of Carbon Nanotube On Interlaminar Property Of Carbon Fiber/Epoxy Composite

Effect of chemically grafted CNTs onto carbon fiber on the mechanical properties of fiber metal laminates

Effect of NH2-MWCNTs sprayed carbon fiber on the mechanical properties of carbon fiber reinforced polycarbonate composite for lightweight structural applications

The CNT/PSt-EA/Kevlar composite with excellent ballistic performance

Effect of deposited carbon nanotubes on interlaminar properties of carbon fiber-reinforced epoxy composites using a developed spraying processing

Enhancing The Interlaminar Fracture Resistance Of Laminated Composites By Using Continuous Carbon Nanotube Films

Improvement in Mechanical and Thermal Properties of Phenolic Foam Reinforced with Multiwalled Carbon Nanotubes

The effect of rolling process on the mechanical and electrical properties of CNTs-enhanced GFRP

Enhanced interlaminar fracture toughness of CF/PEEK laminates by interleaving CNT-decorated PEEK films

Free-Standing CNT Film for Interlaminar Toughening: Insight into Infiltration and Thickness Effects

A multi-layer resin film infusion process to control CNTs distribution and alignment for improving CFRP interlaminar fracture toughness

Multi‐walled Carbon Nanotubes/carbon Fiber Fabric Multiscale Hybrid Materials for Improving the Mechanical and Tribological Properties of Phenolic Resin Composites

Mechanical properties of a laminated composite of aramid fabric and high‐density polyethylene films reinforced with calcium carbonate, montmorillonite, and graphene