Abstract:This study aimed to clarify the dosimetric impact of calibration beam quality for calibration coefficients of the absorbed dose to water for an ionization chamber in an on-site dosimetry audit. Institution-measured doses of 200 photon and 184 electron beams were compared with the measured dose using one year data before and after the calibration of the ionization chamber used. For photon and electron reference dosimetry, the agreements of the institution-measured dose against two measured doses in this audit were evaluated using the calibration coefficients determined using 60Co (${N}_{D,\mathrm{w},{}^{60}\mathrm{Co}}$) and linear accelerator (linac) (${N}_{D,\mathrm{w},Q}$) beams. For electron reference dosimetry, the agreement of two institution-measured doses against the measured dose was evaluated using${N}_{D,\mathrm{w},Q}$. Institution-measured doses were evaluated using direct- and cross-calibration coefficients. For photon reference dosimetry, the mean differences and standard deviation (SD) of institution-measured dose against the measured dose using ${N}_{D,\mathrm{w},{}^{60}\mathrm{Co}}$ and ${N}_{D,\mathrm{w},Q}$ were -0.1% ± 0.4% and -0.3% ± 0.4%, respectively. For electron reference dosimetry, the mean differences and SD of institution-measured dose using the direct-calibration coefficient against the measured dose using ${N}_{D,\mathrm{w},{}^{60}\mathrm{Co}}$ and ${N}_{D,\mathrm{w},Q}$ were 1.3% ± 0.8% and 0.8% ± 0.8%, respectively. Further, the mean differences and SD of institution-measured dose using the cross-calibration coefficient against the measured dose using ${N}_{D,\mathrm{w},Q}$ were -0.1% ± 0.6%. For photon beams, the dosimetric impact of introducing calibration coefficients determined using linac beams was small. For electron beams, it was larger, and the measured dose using ${N}_{D,\mathrm{w},Q}$ was most consistent with the institution-measured dose, which was evaluated using a cross-calibration coefficient.

Establishment of a 241Am gamma calibration field based on international standards and its conversion coefficients

Calibration of High Dose Field in 60 Co-γ Irradiation Equipment

Cavity ionization chamber responses in the JAEA and the NMIJ high-energy photon reference fields for radiation protection

Calibration of Soft X-Ray Detection with Synchrotron Radiation

A New Apparatus for On-Site Calibration of Gamma Dose Rate Monitors

MONTE CARLO SIMULATION STUDY ON THE <SUP>241</SUP>Am-Be RADIONUCLIDE SOURCE REFERENCE NEUTRON RADIATION

Dose Calibration of Health Canada's Fixed Point Surveillance System for Environmental Radiation Monitoring in Terms of Air Kerma and H*(10)

Air kerma reference field with high energy photons using a 15 MeV electron beam from a clinical linear accelerator

Monte CarIo SimuIation of PhysicaI Parameters for Air Kerma Measurement by Graphite Pancake Ionization Chamber

Dosimetric impact of calibration coefficients determined using linear accelerator photon and electron beams for ionization chamber in an on-site dosimetry audit

Performances of different efficiency calibration methods of high-purity-germanium gamma-ray spectrometry in an inter-comparison exercise

Overview and current challenges at the Calibration Laboratory of the Paul Scherrer Institute

Development of a light-weight portable neutron survey meter

A compact moderator for thermal neutron reference radiation field with an 241Am-Be source

X-ray spectrometry for calculating conversion coefficients from air kerma to operational quantities in radiation protection

Determination of the neutron scattering contribution in a neutron calibration field based on MNSR

International comparison of measurements of neutron source emission rate (2016-2021) - CCRI(III)-K9.Cf.2016

Analysis of the standard calibration methods for neutron monitors

Development and Application of Gamma-Radioactivity Nondestructive Measurement System for Complex Radiation Field

Fast Calibration Methods Using Cosmic Rays for a Neutron Detection Array

THE EVALUATION OF RADIATION DOSE RECEIVED BY THE WORKER OF AIRBORNE GAMMA-RAY SPECTROMETRY DURING INSTRUMENT CALIBRATION AND EXPERIMENTS