Abstract:In places where fissile materials are being handled, the risk of a criticality accident can never be absolutely eliminated. Criticality accidents require specialized dosimetry techniques, which differ markedly from those used in routine radiological protection. This is caused by the fact that one should be able to measure very high doses up to 10 Gy in mixed gamma and neutron fields with very high instantaneous dose rates up to 10 5 Gy/s and complex energy spectra. The criticality dosimetry system at the Belgian Nuclear Research Centre SCK CEN is accredited according to ISO 17025 by the Belgian accreditation body BELAC and is used to monitor about 4000 nuclear workers. The system is based on a dedicated criticality dosemeter with four activation detectors (gold foils with and without cadmium shielding, an indium foil and sulphur pellets) and an iterative unfolding algorithm starting from a guess neutron fluence energy spectrum. This work describes the design of the SCK CEN criticality dosemeters and the iterative unfolding algorithm. Furthermore, it also discusses two new developments. Firstly, effective neutron reaction cross sections were calculated by MCNP6.2 Monte Carlo radiation transport simulations to be used in the unfolding algorithm. These effective cross sections take into account the effects of the dosemeter, the potential presence of the body and the neutron angle of incidence. These effects were demonstrated to be important, especially for the gold foils and if the dosemeter is worn against the body. Secondly, a Bayesian unfolding algorithm based on a parametric description of the neutron fluence energy spectrum was developed and tested. The results of this new algorithm were in good agreement with the iterative algorithm. The uncertainty assessment was more realistic with the Bayesian algorithm because it includes also the uncertainty associated with the unfolding process. However, for spectra that cannot be well described by the parametric function, the Bayesian algorithm can lead to significant under- or overestimations. In case sufficient information is available, it is better to make use of the iterative algorithm with a realistic guess spectrum to start from. Finally, this work also demonstrated the compliance of the SCK CEN criticality dosimetry system with the IAEA criteria for criticality dosimetry systems.

Overview and current challenges at the Calibration Laboratory of the Paul Scherrer Institute

LET calibration of ion microbeams and their SEE cross-section characterisation

A new FSA approach for in situ $γ$-ray spectroscopy

Status of the laboratory infrastructure for detector calibration and characterization at the European XFEL

Mixed-field Radiation Monitoring and Beam Characterisation Through Silicon Diode Detectors

Performance assessment and further optimization of the activation based criticality dosimetry system at the Belgian nuclear research centre SCK CEN

Calibration of X-Ray Source of a Powder Diffractometer and Radiation Test of Silicon Microstrip Detectors

Dose Calibration of Health Canada's Fixed Point Surveillance System for Environmental Radiation Monitoring in Terms of Air Kerma and H*(10)

Characterisation of the neutron sources in use at STUK SSDL through a new transfer instrument with spectrometric capabilities

Radioactive Source Calibration Technique for the CMS Hadron Calorimeter

A facility for radiation hardness studies based on a medical cyclotron

A New Apparatus for On-Site Calibration of Gamma Dose Rate Monitors

An Italian InterLaboratory comparison on personal dose equivalent for dosimetry services: promoting measurements reliability and addressing new digital challenges

Dosimetric commissioning and quality assurance of scanned ion beams at the Italian National Center for Oncological Hadrontherapy

Calculation of the Effective Energy Release Centerʼs Position of Inorganic Scintillation Detectors for Calibration at Small “Source–Detector” Distances

Developing and Using International Standards for Neutron Ambient Dose Equivalent Rate Meters

Methodology for measuring photonuclear reaction cross sections with an electron accelerator based on Bayesian analysis

Design development and implementation of an irradiation station at the neutron time-of-flight facility at CERN

On the use of (127)Xe standards for the quality control of CTBTO noble gas stations and support laboratories

On the use of solid 133Ba sources as surrogate for liquid 131I in SPECT/CT calibration: a European multi-centre evaluation