Abstract:Hydrogen storage is an urgent issue for mobile applications, to overcome this issue solid materials have a potential role for hydrogen storage applications. Moreover, the perovskite hydride materials have been extensively investigated for improvement in the field of hydrogen storage. However, this work is focused on the computational study of XAlH 3 (X: Na, Mg) perovskite-type hydrides for different physical properties and hydrogen storage applications. Both materials were found thermodynamically, and mechanically stable from the negative formation energy and elastic properties. They exhibited cubic phases with computed lattice constants are 3.827 Å and 3.752 Å, respectively. The electronic properties indicated that both compounds have a metallic nature, and found the high contribution of Al-p state, and H-1s state near the Fermi level. However, the Hirshfeld net charge analysis detected, that charge transfer from Al and X (Na, Mg) atoms to H atoms. Furthermore, the metallic hydrides have promised candidates for hydrogen storage applications. Both compounds have observed non-magnetic behavior with zero magnetic moments. Elastic constants were calculated to determine the mechanical stability of the compounds, it was found that MgAlH 3 is harder than NaAlH 3 , and it exhibited that higher Bulk, Shear, and Young's modulus. The Poisson's, and Pugh's (G/B) ratios suggested that ionic boning of the atoms, additionally, Pugh's ratio (B/G) and Cauchy pressure (C p ) confirmed that NaAlH 3 ductile and MgAlH 3 is brittle behavior. Besides this, Optical properties were determined for both compounds including the dielectric function, conductivity, refractive index, absorption, and loss function. It is found that the MgAlH 3 compound optical more suitable than NaAlH 3 due to calculated optical factors promised and both compounds are undertaken for solar cells, optoelectronics, and energy storage applications. Finally, the computed hydrogen storage capacity for NaAlH 3 and MgAlH 3 compounds are 6.01 wt%, and 5.56 wt% respectively. These results revealed that both have the potential materials for hydrogen storage, but NaAlH 3 unique material to fulfill the US-DOE criteria of 2020.

An Investigation on the Potential of Utilizing Aluminum Alloys in the Production and Storage of Hydrogen Gas

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals

Experimental Study on the Effect of Low Melting Point Metal Additives on Hydrogen Production in the Aluminum–water Reaction

Low-cost Vanadium-Free Ti–Zr–Cr–Mn–Fe Based Alloys for Metal Hydride Hydrogen Compressor under Mild Conditions

Thermogravimetric Analysis of Hydrogen Production of Al–Mg–Li Particles and Water

Hydrogen Storage with Aluminum Formate, ALF: Experimental, Computational, and Technoeconomic Studies

Metal Substrate Enhanced Hydrogen Production of Aluminum Fed Liquid Phase Ga–In Alloy Inside Aqueous Solution

Hydrogen Production by the Reaction of Al-based Metals with Water Vapor

Electrochemical Properties and Structural Analysis of Non-Stoichiometric Hydrogen Storage Alloys

Molten Salt-Enhanced Production of Hydrogen by Using Skimmed Hot Dross from Aluminum Remelting at High Temperature

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Development of Ti–Zr–Mn–Cr-(V–Fe) Based Alloys for Hydrogen Feeding System in Hydrogen Metallurgy Application

Metal-based cathodes for hydrogen production by alkaline water electrolysis: Review of materials, degradation mechanism, and durability tests

Superior hydrogen production rate by corrosion of recycled aluminum alloys: Feeding a PEM fuel cell

The Optimization of a Physical Factor of Hydrogen Production in Alkaline Water Electrolysis

Fabrication of Al-Ni Alloys for Fast Hydrogen Production from Hydrolysis in Alkaline Water

A review of hydrogen production and storage materials for efficient integrated hydrogen energy systems

The first principles insights of aluminum-based hydrides for hydrogen storage application

Analysis of Hydrogen Embrittlement on Aluminum Alloys for Vehicle-Mounted Hydrogen Storage Tanks: A Review

Progress on nano-scaled alloys and mixed metal oxides in solid-state hydrogen storage; an overview

Hydrogen production performance of an Al-Ga-In-Sn quaternary alloy