Abstract:A serials of organo-soluble transition metal-DABDT coordination polymers were successfully synthesized by the coordination of transition metal ions and DABDT. These coordination polymers were characterized by FTIR, TGA, XRD, UV-Vis spectroscopy, fluorescence spectroscopy, TEM, and vibrational sample magnetometry. Results showed that DABDT coordinated transition metal ions by its amino and sulfydryl groups. The coordination polymers of Co-DABDT, Ni-DABDT, Cu-DABDT and Zn-DABDT exhibited crystal or semi-crystal characteristics, while Fe-DABDT was almost amorphous. The synthesized coordination polymers were soluble in the mixed solvent of DMF and DMSO (volume ratio, 1 : 1). The main UV-Vis absorptions of the as-synthesized transition metal-DABDT coordination polymers were below 400 nm in the ultraviolet region. These coordination polymers emitted cyan light in the DMF and DMSO mixed solution, especially for Zn-DABDT, which emitted obviously stronger cyan light than the other coordination polymers. Fe-DABDT exhibited superparamagnetic character in the approximate range of 25000 G to +5000 G and simple paramagnetic character in the other fields. Co-DABDT and Ni-DABDT followed simple paramagnetic behavior. TEM analysis showed that Ni-DABDT were porous nanospheres with an average diameter of about 69 nm. The rigid molecules of Ni-DABDT arrayed in parallel in the coordination polymer sphere. And Co-DABDT also showed a lamellar structure. The rigid coordination polymer molecules arrayed in parallel due to the formation of hydrogen bond between the -SH and -NH2 groups of adjacent molecular chains in the same plane. And the arrangement between different molecular layers was stacked layer upon layer on account of the pi-pi stacking of the coordination polymer chains. The solubility of the prepared coordination polymers enabled us to carry out a first-time study on their photophysical behavior. What's more, this is the first time to report the planar and lamellar structure of the transition metal-DABDT coordination polymers through TEM analysis.

Alloying One-Dimensional Coordination Polymers To Create Ductile Materials

Symbiotically engineered crystalline-amorphous nanostructure in a strong-yet-stable Al alloy with large twinning-induced plasticity

Diffusion-controlled Alloying of Single-phase Multi-principal Covalent Transition Metal Carbides with Enhanced Damage tolerance and Exceptional Thermal Properties

Diffusion-controlled Alloying of Single-Phase Multi-Principal Transition Metal Carbides with High Toughness and Low Thermal Diffusivity

Enhancing Strength-Ductility Synergy of a Co-Free Complex-Concentrated Alloy Via Tailored Multi-Heterogeneous Microstructure

Symbiotic crystal-glass alloys via dynamic chemical partitioning

Achieving exceptional strength-ductility synergy in a complex-concentrated alloy via architected heterogeneous grains and nano-sized precipitates

Modular Combinatorial Development of Crystal‐Glass Nano‐Heterostructured Copper Alloys with Ultrahigh Strength and Large Deformability

A novel kind of coordination polymers employing 2,5-diamino-1,4-benzenedithiol as a bridging ligand: synthesis, structure, optical and magnetic properties

Enhancing Plasticity in Laser Additive Manufactured High-Entropy Alloys: the Combined Effect of Thermal Cycle Induced Dissolution and Twinning

Metal Node Exchange-Driven Ligand-Strain Modulation Strategy for One-Dimensional Crystalline Coordination Polymers

Solvent-induced structural transformation in a one-dimensional coordination polymer

Composition-dependent slip planarity in mechanically-stable face centered cubic complex concentrated alloys and its mechanical effects

Strength-ductility materials by engineering coherent interface at incoherent precipitates

A Powder-Metallurgy-Based Fabrication Route Towards Achieving High Tensile Strength with Ultra-High Ductility in High-Entropy Alloy

Plasticity Improvement in a Co-Rich Co<sub>40</sub>Fe<sub>25</sub>Cr<sub>20</sub>Ni<sub>15</sub> High-Entropy Alloy via Al Alloying

A reconfigurable crosslinking system <i>via</i> an asymmetric metal-ligand coordination strategy

Effect of Co-content on microstructure, phases, and mechanical properties of laser additive manufactured Co x (CrNi) 100-x alloy

Alloy Design for Mechanical Properties: Conquering the Length Scales

Heterogeneous Lamella Design to Tune the Mechanical Behaviour of a New Cost-Effective Compositionally Complicated Alloy

Breaking the Strength-Ductility Trade-off Via Heterogeneous Structure in FeCoCrNiMo0.2 High-Entropy Alloy