Abstract:A swirling airflow is incorporated in several dry powder inhalers (DPIs) for effective powder de-agglomeration. This commonly requires the use of a flow-straightening grid in the DPI to reduce drug deposition loss caused by large lateral spreading of the emerging aerosol. Here, we propose a novel grid-free DPI design concept that improves the aerosol flow characteristics and reduces the aforementioned drug loss. The basis of this design is the implementation of a secondary airflow that swirls in the opposite direction (counter-swirl) to that of a primary swirling airflow. In-vitro deposition, computational fluid dynamics simulations and particle image velocimetry measurements are used to evaluate the counter-swirl DPI aerosol performance and flow characteristics. In comparison with a baseline-DPI that has only a primary swirling airflow, the counter-swirl DPI has 20% less deposition of the emitted drug dose in the induction port and pre-separator of a next generation impactor (NGI). This occurs as a result of the lower flow-swirl generated from the counter-swirl DPI which eliminates the axial reverse flow outside of the mouthpiece and substantially reduces lateral spreading in the exiting aerosol. Modifications to the counter-swirl DPI design were made to prevent drug loss from the secondary airflow tangential inlets, which involved the addition of wall perforations in the tangential inlets and the separation of the primary and secondary swirling airflows by an annular channel. These modified DPI devices were successful in that aspect but had higher flow-swirl than that in the counter-swirl DPI and thus had higher drug mass retained in the device and deposited in the induction port and pre-separator of the NGI. The fine particle fraction in the aerosols generated from all the counter-swirl-based DPIs and the baseline-DPI are found to be statistically similar to each other.

Optimizing particle size segregation in vacuum drum-based capsule filling machines: A stirrer design approach

Nanoparticle Deagglomeration Driven by a High Shear Mixer and Intensification of Low-Speed Stirring in a Viscous System

Experimental Investigation on Solid Particle Distribution in Dense Solid–liquid Stirred Tank

DEM analysis of the influence of stirrer design on die filling with forced powder feeding

Experimental Study on Micromixing Characteristics of Coaxial Mixer in Solid–Liquid Systems

Stirrer design for improving fluidization of cohesive powder: A time-resolved X-ray study

Enhancing Mixing of Particles by Baffles in A Rotating Drum Mixer

Ensuring Homogeneity in Powder Mixtures for Pharmaceuticals and Dietary Supplements: Evaluation of a 3-Axis Mixing Equipment

Mixing of Monoclonal Antibody Formulated Drug Substance Solutions in Square Disposable Vessels

Three Dimensional DEM/CFD Analysis of Segregation During Silo Filling with Binary Mixtures of Different Particle Sizes

A Coupled DEM/CFD Analysis of Die Filling Process

Investigating screw-agitator speed ratio impact on feeding performance in pharmaceutical manufacturing using discrete element method

Enhancement of inhaled micronized powder flow properties for accurate capsules filling

Effect of particle angularity on flow regime transitions and segregation of bidisperse blends in a rotating drum

A counter-swirl design concept for dry powder inhalers

Analysis of the Dispersive and Distributive Mixing Effect of Screw Elements on the Co-Rotating Twin-Screw Extruder with Particle Tracking

DLD pillar shape design for efficient separation of spherical and non-spherical bioparticles.

Controlling the size of fragrance microcapsules using designed agitator paddles: Experiment and CFD simulation

Fluid Dynamics and Power Consumptions in a Single Use Stirred Tank Adopted in the Pharmaceutical Industry

A Three-Dimensional Double-Helical Structure Microfluidic Chip with Efficient Mixing

Density and size-induced mixing and segregation in the FT4 powder rheometer: An experimental and numerical investigation