Abstract:The separator is a significant safety component inside the lithium-based battery. To design a higher-power-density system, a functional separator has attracted more attention. In our study, vinyl trimethoxysilane (VTMS) has been directly grafted onto a polyethylene (PE) separator by γ-irradiation. We have evaluated the performance of a PE separator grafted with VTMS (PE-g-SiH) and its basic hydrolysis separator (PE-g-SiO) in detail and have discussed the role of separator surface polarity in the ion transport process. The consequence shows that the lithium-ion transference number of the PE-g-SiO separator is 0.38, superior than 0.27 of a pure PE separator and 0.29 of a PE-g-SiH separator. It can be a reason that the LiCoO2/Li cell with a PE-g-SiO separator shows excellent cycle stability and rate performance. Furthermore, in the case of a PE-g-SiO separator, the Li/Li symmetric model possesses the lowest activation energy of 55.2 kJ mol–1, indicating that lithium ions migrate easily at the interface of electrodes and a separator filled with liquid electrolyte. It is attributed to the improved interaction between the separator wall and solvent, which is in favor of lithium-ion-selective transport. Hence, separator functionalization is expected to enhance the battery performance further.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00737?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00737</a>.Figure S1: Contact angle of a bare PE separator, PE-g-SiH separator, and PE-g-SiO separator with a liquid electrolyte. Figure S2: I–V curves of the SS/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator. Figure S3: Voltage–time curves of the Li/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator at the deposition capacity of 1.5 mAh cm–2 and the current density of 1.5 mA cm–2. Figure S4: Nyquist plots of LiCoO2/Li half-cells based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator after (a) rate performance and (b) cycle performance. Table S1: Characteristics of these separators (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00737/suppl_file/ae1c00737_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Polyethylene separator activated by γ-ray irradiation for improving lithium-based battery performance

Improving the Properties of HDPE Based Separators for Lithium Ion Batteries by Blending Block with Copolymer PE- B -PEG

Polyethylene Battery Separator with Auto‐shutdown Ability, Thermal Stability of 220°C, and Hydrophilic Surface Via Solid‐state Ultraviolet Irradiation

Polyethylene separator grafting with polar monomer for enhancing the lithium-ion transport property

High-performance polyethylene separators for lithium-ion batteries modified by phenolic resin

Fabrication of Diatomite/polyethylene Terephthalate Composite Separator for Lithium-Ion Battery

Synergistic effect of dispersant and wetting reagent on wettability, thermal Stability and electrochemical properties of PVDF-coating polyethylene separator for lithium-ion batteries

Role of Separator Surface Polarity in Boosting the Lithium-Ion Transport Property for a Lithium-Based Battery

Effect of Polyphenol-Polyamine Treated Polyethylene Separator on the Ionic Conduction and Interface Properties for Lithium-Metal Anode Batteries

Ethylcellulose-coated polyolefin separators for lithium-ion batteries with improved safety performance

Application of PVDF Organic Particles Coating on Polyethylene Separator for Lithium Ion Batteries

TiO2 Nanorod-Coated Polyethylene Separator with Well-Balanced Performance for Lithium-Ion Batteries

Functionalized γ-Boehmite Covalent Grafting Modified Polyethylene for Lithium-Ion Battery Separator

In situ mineralized Ca3(PO4)2 inorganic coating modified polyethylene separator for high-performance lithium-ion batteries

The morphology of polyethylene (PE) separator for lithium-ion battery tuned by the extracting process

The fabrication of high-performance α-Al2O3 coated PE separator for lithium-ion batteries based on multiple hydrogen bonds

Enhanced performance of modified HDPE separators generated from surface enrichment of polyether chains for lithium ion secondary battery

Novel Fast Ionic Conductor Ceramic Composite Separator for High-performance Safe Li-Ion Power Batteries

Polyphenols Assisted Silica Coating on Polypropylene Separators with Improved Wettability and Heat‐resistance for Lithium‐ion Batteries

Preparation of PEI-modified PI separators for advanced lithium ion batteries

Application of Polyethylene Separator Modified by Methyl Acrylic Polymer in Lithium Ion Battery