Abstract:The separator is a significant safety component inside the lithium-based battery. To design a higher-power-density system, a functional separator has attracted more attention. In our study, vinyl trimethoxysilane (VTMS) has been directly grafted onto a polyethylene (PE) separator by γ-irradiation. We have evaluated the performance of a PE separator grafted with VTMS (PE-g-SiH) and its basic hydrolysis separator (PE-g-SiO) in detail and have discussed the role of separator surface polarity in the ion transport process. The consequence shows that the lithium-ion transference number of the PE-g-SiO separator is 0.38, superior than 0.27 of a pure PE separator and 0.29 of a PE-g-SiH separator. It can be a reason that the LiCoO2/Li cell with a PE-g-SiO separator shows excellent cycle stability and rate performance. Furthermore, in the case of a PE-g-SiO separator, the Li/Li symmetric model possesses the lowest activation energy of 55.2 kJ mol–1, indicating that lithium ions migrate easily at the interface of electrodes and a separator filled with liquid electrolyte. It is attributed to the improved interaction between the separator wall and solvent, which is in favor of lithium-ion-selective transport. Hence, separator functionalization is expected to enhance the battery performance further.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00737?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00737</a>.Figure S1: Contact angle of a bare PE separator, PE-g-SiH separator, and PE-g-SiO separator with a liquid electrolyte. Figure S2: I–V curves of the SS/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator. Figure S3: Voltage–time curves of the Li/Li model based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator at the deposition capacity of 1.5 mAh cm–2 and the current density of 1.5 mA cm–2. Figure S4: Nyquist plots of LiCoO2/Li half-cells based on a PE separator, PE-g-SiH separator, and PE-g-SiO separator after (a) rate performance and (b) cycle performance. Table S1: Characteristics of these separators (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00737/suppl_file/ae1c00737_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The fabrication of high-performance α-Al2O3 coated PE separator for lithium-ion batteries based on multiple hydrogen bonds

Polypropylene Separator Coated with a Thin Layer of Poly(lithium Acrylate‐co‐butyl Acrylate) for High‐performance Lithium‐ion Batteries

Bifunctional separator with high thermal stability and lithium dendrite inhibition toward high safety lithium-ion batteries

Functionalized γ-Boehmite Covalent Grafting Modified Polyethylene for Lithium-Ion Battery Separator

Polyethylene Battery Separator with Auto‐shutdown Ability, Thermal Stability of 220°C, and Hydrophilic Surface Via Solid‐state Ultraviolet Irradiation

High‐Performance Al 2 O 3 /PAALi Composite Separator Prepared by Water‐Based Slurry for High‐Power Density Lithium‐Based Battery

Novel Fast Ionic Conductor Ceramic Composite Separator for High-performance Safe Li-Ion Power Batteries

Application of PVDF Organic Particles Coating on Polyethylene Separator for Lithium Ion Batteries

Ceramic Nanoparticle-Decorated Melt-Electrospun PVDF Nanofiber Membrane with Enhanced Performance as a Lithium-Ion Battery Separator

Enhanced separator properties by coating alumina nanoparticles with poly(2-acrylamido-2-methyl-1-propanesulfonic acid) binder for lithium-ion batteries

H-Bond Cross-Linked Polyimide Nanofiber-Modified Polyethylene Composite Separators for Lithium-Ion Batteries

Crystalline Al2O3 modified porous poly(aryl ether ketone) (PAEK) composite separators for high performance lithium-ion batteries via an electrospinning technique

A Modified Ceramic-Coating Separator with High-Temperature Stability for Lithium-Ion Battery

Surface-modified composite separator for lithium-ion battery with enhanced durability and security

Role of Separator Surface Polarity in Boosting the Lithium-Ion Transport Property for a Lithium-Based Battery

Polyphenols Assisted Silica Coating on Polypropylene Separators with Improved Wettability and Heat‐resistance for Lithium‐ion Batteries

Thermally stable poly-aromatic solid electrolyte coated polyethylene membrane as high-performance lithium-ion battery separator

Superior Lithium Battery Separator with Extraordinary Electrochemical Performance and Thermal Stability Based on Hybrid UHMWPE/SiO2 Nanocomposites Via the Scalable Biaxial Stretching Process

TiO2 Nanorod-Coated Polyethylene Separator with Well-Balanced Performance for Lithium-Ion Batteries

A tailored ceramic composite separator with electron-rich groups for high-performance lithium metal anode