Abstract:Zinc (Zn) alloys are a promising biodegradable material for vascular stent applications. This study aimed to fabricate biodegradable Zn-2.0Cu-0.5Mn alloy micro-tubes and vascular stents with high dimensional accuracy and suitable mechanical properties, and to investigate their microstructure, texture, mechanical properties and corrosion behavior. The micro-tubes and vascular stents were successfully fabricated by a combined process of extrusion, drawing, laser cutting and electrochemical polishing. The microstructures of as-extruded and as-drawn micro-tubes consisted of Zn matrix with near-equiaxed grains (average grain size: ∼2 µm) and second phases of ε (CuZn4) and MnZn13 with different sizes. The texture evolved from basal planes approximately paralleling to deformation direction for as-extruded micro-tube to approximately perpendicular to deformation direction for as-drawn micro-tube, because predominant deformation mechanisms changed from basal <a> dislocation slip during tube extrusion to prismatic <a> dislocation, pyramidal <c+a> dislocations, and {101¯2} twins during tube drawing. As-drawn micro-tube exhibited suitable mechanical properties with an ultimate tensile strength of about 298 MPa and elongation of about 26% as a stent material. Moreover, the processed stent with a thickness of about 125 µm possessed sufficient radial strength of about 150 kPa and good balloon expandability. In addition, as-drawn tube exhibited an in vitro corrosion rate of about 158 µm/year with a basically uniform corrosion morphology. These results indicated that biodegradable Zn-2.0Cu-0.5Mn alloy is a promising vascular stent material candidate, and the procedure for processing the micro-tube and stent is practical and effective. STATEMENT OF SIGNIFICANCE: Fabrication of micro-tubes followed by laser cutting and polishing is a common way to prepare metallic vascular stents. However, it is quite challenging to fabricate Zn-based stents using this standard method, and there is a lack of studies reporting processing details in the past. Biodegradable Zn-2.0Cu-0.5Mn alloy micro-tubes and vascular stents with high dimensional accuracy and suitable mechanical properties were successfully fabricated by a combined process in this study. As-drawn micro-tube exhibited an ultimate tensile strength of about 298 MPa and elongation of about 26%. The stent possessed sufficient radial strength of about 150 kPa and good balloon expandability. We demonstrated a practical method to fabricate biodegradable Zn-based micro-tubes and stents with high dimensional accuracy and mechanical properties.

[My practice of thrombolysis in the acute phase of myocardial infarction in the light of extensive studies].

Research Progress in Biodegradable Metals for Stent Application

New Insights and Perspectives into Biodegradable Metals in Cardiovascular Stents: A Mini Review

In vivo degradation and endothelialization of an iron bioresorbable scaffold

Receptor tyrosine kinase signaling--a proteomic perspective.

Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application

Predicted vs observed effectiveness of outer membrane vesicle (OMV) vaccines against meningococcal serogroup B disease: Systematic review.

In Vitro Characterization of ZM21 Mini-Tube Used for Biodegradable Metallic Stent

In vitro degradation behavior of Fe-20 Mn-1.2C alloy in three different pseudo-physiological solutions

Long-term in vivo study of biodegradable Zn-Cu stent: A 2-year implantation evaluation in porcine coronary artery.

Fabrication and characterization of biodegradable Zn-Cu-Mn alloy micro-tubes and vascular stents: Microstructure, texture, mechanical properties and corrosion behavior

In Vitro Degradation and Biocompatibility Evaluation of Typical Biodegradable Metals (mg/zn/fe) for the Application of Tracheobronchial Stenosis

In vitro study on newly designed biodegradable Fe-X composites (X = W, CNT) prepared by spark plasma sintering.

The developmental rate ofEuphausia crystallorophias larvae in Ellis Fjord, Vestfold Hills, Antarctica

Strategy of Metal-Polymer Composite Stent to Accelerate Biodegradation of Iron-Based Biomaterials.

Recent advances in Fe-based bioresorbable stents: Materials design and biosafety

A biodegradable metal‐polymer composite stent safe and effective on physiological and serum‐containing biomimetic conditions

In vitro cytocompatibility, hemocompatibility and antibacterial properties of biodegradable Zn-Cu-Fe alloys for cardiovascular stents applications

Recent Progress on Mg- and Zn-Based Alloys for Biodegradable Vascular Stent Applications

Moving research direction in the field of metallic bioresorbable stents-A mini-review

Evolution of Metallic Cardiovascular Stent Materials: A Comparative Study among Stainless Steel, Magnesium and Zinc.