Abstract:Pure iron as a potential bioresorbable material for bioresorbable coronary scaffold has major disadvantages of slow corrosion and bioresorption. However, so far, there are neither quantitative data of long-term in vivo corrosion nor direct experimental evidence for bioresorption of pure iron and its alloys, which are fundamental and vital for developing novel Fe-based alloys overcoming the intrinsic drawbacks of pure iron. This work systemically investigated scaffold performance, long-term in vivo corrosion behavior and biocompatibility of a nitrided iron coronary scaffold and explored its bioresorption mechanism. It was found that the 70 mu m Fe-based scaffold was superior to a state of the art Co-Cr alloy stent (Xience Prime (TM)) in terms of crossing profile, recoil and radial strength. Mass loss was 76.0 +/- 8.5 wt% for the nitrided iron scaffold and 44.2 +/- 11.4 wt% for the pure iron scaffold after 36 months implantation in rabbit abdominal aorta (p < 0.05). The Fe-based scaffold showed good long-term biocompatibility in both rabbit and porcine model. Its insoluble corrosion products were demonstrated biosafe and could be cleared away by macrophages from in situ to adventitia to be indiscernible by Micro Computed Tomography and probably finally enter the lymphatics and travel to lymph nodes after 53 months implantion in porcine coronary artery. The results indicate that the nitrided iron scaffold with further improvements shall be promising for coronary application.Statement of SignificancePure iron as a potential bioresorbable material has major disadvantages of slow corrosion and bioresorption. However, so far, there are neither quantitative data of long-term in vivo corrosion nor direct experimental evidence for bioresorption of pure iron and its alloys. Only this work systemically investigated long-term in vivo corrosion behavior and biocompatibility of a nitrided iron coronary scaffold up to 53 months after implantation and explored its bioresorption mechanism. These are fundamental and vital for developing novel Fe-based alloys overcoming the intrinsic drawbacks of pure iron. Novel testing and section-preparing methods were also provided in this work to facilitate future research and development of novel Fe-based alloy scaffolds. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

In vivo degradation and endothelialization of an iron bioresorbable scaffold

Long-Term Efficacy, Safety and Biocompatibility of a Novel Sirolimus Eluting Iron Bioresorbable Scaffold in a Porcine Model

Design and Characterization of a Novel Biocorrodible Iron-Based Drug-Eluting Coronary Scaffold

Long-term safety and absorption assessment of a novel bioresorbable nitrided iron scaffold in porcine coronary artery

Long-Term in Vivo Corrosion Behavior, Biocompatibility and Bioresorption Mechanism of A Bioresorbable Nitrided Iron Scaffold

Magnetic Resonance (MR) Safety and Compatibility of a Novel Iron Bioresorbable Scaffold

A biodegradable metal‐polymer composite stent safe and effective on physiological and serum‐containing biomimetic conditions

Synchrotron microtomography reveals insights into the degradation kinetics of bio-degradable coronary magnesium scaffolds

Long-Term Efficacy of Biodegradable Metal-Polymer Composite Stents after the First and the Second Implantations into Porcine Coronary Arteries

Degradation of a novel magnesium alloy-based bioresorbable coronary scaffold in a swine coronary artery model

Characterization and in Vivo Evaluation of a Bio-Corrodible Nitrided Iron Stent

[The in Vivo Thrombosis Evaluation for the Biodegradable Polymer Stent].

Exploring the biodegradability of candidate metallic intravascular stent materials using X-ray microfocus computed tomography: An in vitro study

Strategy of Metal-Polymer Composite Stent to Accelerate Biodegradation of Iron-Based Biomaterials.

Long-term in vivo study of biodegradable Zn-Cu stent: A 2-year implantation evaluation in porcine coronary artery.

Diabetes-induced Iron Stent Degradation but Preventing Re-Endothelialization after Implantation

In Silico Evaluation of In Vivo Degradation Kinetics of Poly(Lactic Acid) Vascular Stent Devices

Biosafety and Efficacy Evaluation of a Biodegradable Magnesium Based Drug-eluting Stent in Porcine Coronary Artery

Degradation behaviors and in-vivo biocompatibility of a rare earth- and aluminum-free magnesium-based stent

A Head to Head Comparison of XINSORB Bioresorbable Sirolimus-Eluting Scaffold Versus Metallic Sirolimus-Eluting Stent: 180 Days Follow-Up in a Porcine Model

Advances in the development of biodegradable coronary stents: A translational perspective