Abstract:Six largely produced agricultural biomass wastes were pyrolyzed into biochars. ● Feedstock type significantly determined physiochemical properties of biochars. ● The biochars showed powerful adsorption capabilities to Plasticizer DEP. ● Giant reed biochar with higher DEP adsorption was a prominent sorbent. Plastic pollution as a global environmental issue has become a research hotspot, among which the removal of inherent plasticizer (e.g., phthalic acid esters, PAEs) received increasing attention. However, the effects of biochars derived from different feedstocks on the adsorption of PAEs are poorly understood. Thus, the characteristics of biochars derived from six largely produced biomass wastes in China at 400 °C, as well as their performance in adsorption of diethyl phthalate (DEP), one of frequently detected PAEs in aqueous environment, were investigated. The results indicated that the variation in feedstock type showed significant changes in the properties (e.g., porosity, specific surface area, surface functional groups) of biochars, which affected DEP adsorption and desorption. Pseudo-second order and Freundlich models fitted the adsorption data well, and adsorption mechanisms mainly included hydrophobic effect, followed by micropore filling, hydrogen bonding, and π-π EDA interactions. Adsorption thermodynamics revealed that the adsorption was a spontaneous and exothermic the adsorption capacities of DEP on these biochars slightly decreased with the increasing pH but increased with the increasing ionic strength. Among these biochars, the giant reed biochar with relatively higher DEP adsorption and low desorption exhibited the great efficiency for DEP removal as an environment-friendly sorbent. These results highlighted the significant roles of micropore filling and hydrogen bond in determining adsorption capacity of designed biochars prepared from selecting suitable agricultural straws and wetland plant waste to typical plasticizer. The findings are useful for producing designed biochars from different biomass wastes for plasticizer pollution control.

Recycling and reuse of waste agricultural plastics with hydrothermal pretreatment and low-temperature pyrolysis method

Synthesis of Al-Modified Hydrochar from Corn Stover for Efficient Phosphate Removal

Efficiency Recycling and Utilization of Phosphate from Wastewater Using LDHs-Modified Biochar

Recycling of phosphorus-containing plastic based on the dual effects of switchable hydrophilicity solvents

Recycled polyethylene/polyethylene‐ethylene‐1‐octene‐maleic anhydride composite with improved mechanical properties

Preparation of Organic Crystal Seed and Its Application in Improving the Functional Period of Biodegradable Agricultural Film

Recycling Polyethylene into High‐Value Porous Carbon Composites for Microwave Absorption

Impact of the thermo-alkaline pretreatment on the anaerobic digestion of poly(butylene adipate-co-terephthalate) (PBAT) and poly(lactic acid) (PLA) blended plastics

A green and efficient method to prepare oleic acid-modified CaCO 3 /reHDPE composites

Converting waste agricultural film to polyethylene waxes: A mechanism and whitening study

Co-pyrolysis of cyanobacteria and plastics to synthesize porous carbon and its application in methylene blue adsorption

Exploring the Feasibility of Polysaccharide-Based Mulch Films with Controlled Ammonium and Phosphate Ions Release for Sustainable Agriculture

Hybrid Chemomechanical Plastics Recycling: Solvent-free, High-Speed Reactive Extrusion of Low-Density Polyethylene

Polyethylene Recycling via Water Activation by Ball Milling

Efficient recovery of phosphorus in sewage sludge through hydroxylapatite enhancement formation aided by calcium-based additives

Microporous melamine-formaldehyde networks loaded on rice husks for dynamic removal of organic micropollutants

Resource Utilization of Typical Biomass Wastes As Biochars in Removing Plasticizer Diethyl Phthalate from Water:Characterization and Adsorption Mechanisms

Highly Efficient Recycling Waste Plastic into Hydrogen and Carbon Nanotubes through a Double Layer Microwave‐Assisted Pyrolysis Method

Biomass upcycling of waste rPET to higher-value new-easy-recyclable microcellular thermoplastic (co)polyamide foams and hot-melt adhesives

The effect of low-temperature plasma pretreatment on the biodegradability of polyethylene films

Chemical Recycling of Plastics by Microwave‐Assisted High‐Temperature Pyrolysis