Abstract:Shellfish shell as an aquaculture byproduct is usually abandoned randomly after consumption, leading to heartrending resource waste and severe environmental pollution. At present, blending waste seashell powder with biodegradable polymers is a potentially efficient method of green recycling, but the unsatisfactory mechanical properties from poor interfacial compatibility and serious filler agglomeration limit its potential application. Here, a multifunctional epoxy-based chain extender was used as an in situ reactive compatibilizer to reinforce the interaction of poly(lactic acid)/poly(butylene adipate-co-terephthalate) (PLA/PBAT) composites filled with waste seashell powder (WSP) via the straightforward melting blend, followed by the annealing treatment above the glass transition temperature. Surprisingly, the epoxy groups in chain extenders could not only react with the terminal groups in PLA and PBAT but also interact with hydroxyl-rich WSP for efficient in situ compatibilization. In addition, induced by the annealing treatment at 80 °C, the formation of a high-energy gauche–gauche (gg) conformer in PLA molecules further improved the impact properties of the composite. Ultimately, under the synergy between enhanced interphase combination and increased gg conformer, the tensile strength and impact strength increased by 53 and 76%, respectively, compared to that of the sample without compatibilization and annealing. Green composites are highly suitable for packaging products because of their obvious advantages, including reliable mechanical performance, cost-effectiveness, and biodegradability. This work introduced an implementable and efficient route for the upcycling of waste seashells.

A green and efficient method to prepare oleic acid-modified CaCO 3 /reHDPE composites

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Recycled polyethylene/polyethylene‐ethylene‐1‐octene‐maleic anhydride composite with improved mechanical properties

A Potential Bio-Filler: the Substitution Effect of Furfural Modified Clam Shell for Carbonate Calcium in Polypropylene

Practicality of physical recycling method for waste polymer composites exampled via high density polyethylene/automobile shredder residue composites

Facile method to improve toughness and biodegradability of polylactide by modified CaCO3

Bio-filler from Waste Shellfish Shell: Preparation, Characterization, and Its Effect on the Mechanical Properties on Polypropylene Composites.

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Preparation, Characterization And Filling Effect Study Of Dye-Loaded Shell Powder On The Properties Of Ldpe Composite

Oxidization and Chain‐Branching Reaction for Recycling HDPE and Mixed HDPE/PP with In‐situ Compatibilization by Ozone‐Induced Reactive Extrusion

Mechanically Robust Wasted Seashell-Filled Poly(lactic acid)/poly(butylene adipate- co -terephthalate) Composite via In Situ Reactive Compatibilization and Conformational Transition

Preparation and properties of recycled polypropylene‐based wood–plastic composites reinforced with a bio‐based compatibilizer

Structures of the co‐branching reactive products of isotactic polypropylene with high‐density polyethylene and the effect on the in situ compatibilization of mixed recycled materials

Mechanical and Processing Enhancement of a Recycled HDPE/PPR-Based Double-Wall Corrugated Pipe via a POE- g -MAH/CaCO 3 /HDPE Polymer Composite

Mechanically Strong and Tough Plant Oil-Based Poly(ester amide) Vitrimers with Closed-Loop Recyclability

Effect of thermal-oxidative and mechanical degradation of recycled LDPE on foaming

Enhancement and Compatibilization of Waste-Sourced Biocomposites Through Elastomer Blending and Matrix Grafting Modification

Recycling and reuse of waste agricultural plastics with hydrothermal pretreatment and low-temperature pyrolysis method

Preparation and Performance of PBAT/PLA/CaCO3 Composites via Solid-State Shear Milling Technology

Toughening and reinforcing waste polypropylene with POE / nano‐SiO 2 under elongational flow