Abstract:Polyethylene (PE) occupies a large proportion in waste plastics, while its natural degradation rate is slow, if without timely recycling treatment, which would directly lead to serious ecological and environmental problems. Incineration and thermolysis methods based on thermochemical conversion are commonly used effective ways for the treatment of plastic waste, which presented the advantages of high efficiency and low pollution. In this paper, cone calorimeter and tubular thermolysis furnace-mass spectrometer (MS) combination platform were applied for the catalytical combustion and thermolysis characteristics of PE with three kinds of catalysts, which were H-Zeolite Standard Oil Corporation Of New York (Socony) Mobil-Five (HZSM-5), H-ultra stable Y zeolite (HUSY), and Mobil Composition of Matters-41 (MCM-41), respectively. Under the effect of MCM-41, the heat release rate (HRR) of samples under different heat flux (25, 35, 45 kW/m2) was decreased by 59.7%, 48.8%, and 46.6%, and the time to peak HRR was advanced in 60 s, 27 s, and 10 s, respectively. Therefore, the burning efficiency could be controlled and the fire risk would be declined with the addition of catalysts. With the increase of the catalyst pore diameter, the combustion efficiency was enhanced, while rising incineration temperature would not necessarily mean an increase in combustion efficiency. During thermolysis, HZSM-5 was most effective catalyst for the conversion of PE to alkenes and aromatic hydrocarbons (AHs) such as benzene, toluene, and xylene (BTX). Among the three catalysts, the microporous HZSM-5 showed higher catalytic performance due to its strong acidity and suitable pore structure. This work enriches the combustion and thermolysis mechanism of PE, and provides reference and basis for the design of waste plastic recycling processing.Graphical abstractThe catalytic incineration and pyrolysis of polyethylene were investigated, which might provide reference for the waste plastic recycling processing design.

Highly Efficient Recycling Waste Plastic into Hydrogen and Carbon Nanotubes through a Double Layer Microwave‐Assisted Pyrolysis Method

Mechanistic Understanding of Efficient Polyethylene Hydrocracking over Two-Dimensional Platinum-Anchored Tungsten Trioxide.

Product Selection Toward High-Value Hydrogen and Bamboo-Shaped Carbon Nanotubes from Plastic Waste by Catalytic Microwave Processing

Upcycling Polyethylene to High‐Purity Hydrogen under Ambient Conditions via Mechanocatalysis

A high-quality hydrogen production strategy from waste plastics through microwave-assisted reactions with heterogeneous bimetallic iron/nickel/cerium catalysts

Microwave-assisted pyrolysis of plastic waste with magnetic catalysts in a multi-ridge field compressed reactor

Conversion of Polyethylene to Low-Molecular-Weight Oil Products at Moderate Temperatures Using Nickel/Zeolite Nanocatalysts

Microwave-carbon Fiber Cloth Co-Ignited Catalytic Degradation of Waste Plastic into High-Yield Hydrogen and Carbon Nanotubes

Constructing bifunctional porous nanosheets for efficient conversion of waste plastics into valuable hydrogen and carbons

Microwave-intensified catalytic upcycling of plastic waste into hydrogen and carbon nanotubes over self-dispersing bimetallic catalysts

CO 2 enhanced continuous microwave pyrolysis of low-density polyethylene to produce high-quality products: Energy recovery balance and intrinsic mechanism exploration

High-yield H2 production from polypropylene through pyrolysis-catalytic reforming over activated carbon based nickel catalyst

Recycling Polyethylene into High‐Value Porous Carbon Composites for Microwave Absorption

Sustainable production of hydrogen and carbon nanotubes/nanofibers from plastic waste through microwave degradation

Low-temperature hydrogen production from waste polyethylene by nonthermal plasma (NTP)-assisted catalytic pyrolysis using NiCeOx/β catalyst

Hydrogen-free Upcycling of Polyethylene Waste to Methylated Aromatics over Ni/ZSM-5 under Mild Conditions.

Enhancement of hydrogen and carbon nanotubes production from hierarchical Ni/ZSM-5 catalyzed polyethylene pyrolysis

Enhancement of catalytic combustion and thermolysis for treating polyethylene plastic waste

Micro-wave induced pyrolysis of low density polyethylene (LDPE) and biodegradation of resulting wax in soil and by defined microbial consortia is closing the loop towards LDPE upcycling

Continuous process design of the microwave chemical recycling of waste plastics using microwave-absorbing heating elements

Simultaneous production of high-valued carbon nanotubes and hydrogen from catalytic pyrolysis of waste plastics: The role of cellulose impurity